Exam JN0-521 braindumps

Many people think that passing some difficult IT certification exams needs to be proficient in much of IT expertise and only these IT personnels who grasp the comprehensive IT knowledge would be able to enroll in the exam. In fact, there are many ways to help you make up for your lack of knowledge, and pass the IT certification exams in the same. Perhaps you would spend less time and effort than the people who grasp fairly comprehensive expertise. The saying goes, all roads lead to Rome.

IT-Tests.com Juniper JN0-521 exam training materials have the best price value. Compared to many others training materials, IT-Tests.com's Juniper JN0-521 exam training materials are the best. If you need IT exam training materials, if you do not choose IT-Tests.com's Juniper JN0-521 exam training materials, you will regret forever. Select IT-Tests.com's Juniper JN0-521 exam training materials, you will benefit from it last a lifetime.

Exam Code: JN0-521
Exam Name: Juniper (FWV.Associate (JNCIA-FWV))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 119 Questions and Answers
Last Update: 2013-09-03

As we all know, IT-Tests.com's Juniper JN0-521 exam training materials has very high profile, and it is also well-known in the worldwide. Why it produces such a big chain reaction? This is because IT-Tests.com's Juniper JN0-521 exam training materials is is really good. And it really can help us to achieve excellent results.

The appropriate selection of training is a guarantee of success. However, the choice is very important, IT-Tests.com popularity is well known, there is no reason not to choose it. Of course, Give you the the perfect training materials, if you do not fit this information that is still not effective. So before using IT-Tests.com training materials, you can download some free questions and answers as a trial, so that you can do the most authentic exam preparation. This is why thousands of candidates depends IT-Tests.com one of the important reason. We provide the best and most affordable, most complete exam training materials to help them pass the exam.

IT-Tests.com's Juniper JN0-521 exam training materials not only can save your energy and money, but also can save a lot of time for you. Because the things what our materials have done, you might need a few months to achieve. So what you have to do is use the IT-Tests.com Juniper JN0-521 exam training materials. And obtain this certificate for yourself. IT-Tests.com will help you to get the knowledge and experience that you need and will provide you with a detailed Juniper JN0-521 exam objective. So with it, you will pass the exam.

JN0-521 (FWV.Associate (JNCIA-FWV)) Free Demo Download: http://www.it-tests.com/JN0-521.html

NO.1 You are looking at the event log of the responding device and it says,
"Rejected an initial Phase 1 packet from an unrecognized peer gateway"
What are three likely reasons for the failure? (Choose three.)
A.The peer ID is misconfigured.
B.The default gateway is missing.
C.The preshare keys are mismatched.
D.The gateway address is misconfigured.
E.The outgoing interface is misconfigured.
Answer: ADE

Juniper dumps   JN0-521 test questions   JN0-521

NO.2 By default, from which hardware component is the startup copy of the ScreenOS loaded?
A.NVRAM
B.TFTP server
C.internal flash
D.PCMCIA card
Answer: C

Juniper   JN0-521 demo   JN0-521 dumps   JN0-521   JN0-521 questions   JN0-521 answers real questions

NO.3 When performing an image upgrade using the CLI, which three locations would be a source for this
image? (Choose three.)
A.FTP server
B.TFTP server
C.internal flash
D.PC local disk
E.Compact Flash Card
Answer: BCE

Juniper questions   JN0-521 original questions   JN0-521   JN0-521 test answers

NO.4 When a firewall receives the first packet in a series, what will it immediately do?
A.Check its route table.
B.Check its session table.
C.Determine if traffic is crossing zones.
D.Verify that it is not malformed or a fragment.
Answer: D

Juniper   JN0-521   JN0-521 dumps   JN0-521

NO.5 An operational firewall needs a configuration loaded and executed while it is passing user data.
Which CLI command will perform this process without interrupting traffic?
A.save config from tftp 1.1.7.250 15June06.cfg to flash
B.save config from tftp 1.1.7.250 15June06.cfg to ram
C.save config from tftp 1.1.7.250 15June06.cfg merge
D.save config from tftp 1.1.7.250 15June06.cfg to flash
Answer: C

Juniper certification training   JN0-521 original questions   JN0-521 answers real questions   JN0-521 test questions

NO.6 Click the Exhibit button.
In the exhibit, which interface would be used to forward traffic to host 1.1.7.5?
A.e0/1
B.e0/2
C.e0/3
D.e0/4
Answer: C

Juniper   JN0-521 answers real questions   JN0-521 certification   JN0-521

NO.7 Which statement is correct regarding administrator privileges?
A.Any administrator can change their privileges on an as-needed basis.
B.Administrator privileges can only be established and changed by the root administrator.
C.Administrator privileges can be established and changed by the root and all-privilege administrator.
D.Administrator privileges can only be established by the root and can be changed by the root and
all-privilege administrator.
Answer: B

Juniper questions   JN0-521   JN0-521   JN0-521 questions

NO.8 Which command is used when configuring web management on the VLAN1 interface for a client
connected to an e3 interface in the DMZ zone?
A.set int eth3 manage web
B.set zone v1-dmz manage web
C.set int dmz zone manage web
D.set int VLAN1 zone dmz manage web
Answer: B

Juniper original questions   JN0-521   JN0-521 demo   JN0-521 braindump

NO.9 Which process describes how an addressed physical interface is moved into a Layer 2 zone?
A.Place the required interface into the VLAN zone.
B.Place the required interface into L2 zones such as V1-Trust, V1-Untrust
C.Remove the interface from the L3 zone such as Trust and place it into a L2 zone such as V1-Trust
D.Remove the address from the interface, remove the interface from the L3 zone, and then place
interface in the L2 zone.
Answer: D

Juniper   JN0-521 certification training   JN0-521   JN0-521

NO.10 When configuring a firewall in a critical environment where a local backup configuration is quickly
needed, what should be completed on a periodic basis?
A.Execute exec config rollback.
B.Execute save config to last-known-good.
C.Execute save regularly or create a script that does this.
D.Execute save software from flash to pcmcia .
Answer: B

Juniper questions   JN0-521 exam dumps   JN0-521   JN0-521 questions   JN0-521 questions   JN0-521

NO.11 A ScreenOS firewall has the correct interfaces addressed and active. A policy is written allowing
interzone FTP traffic from a directly connected client. But the traffic does not cross the firewall from the
client to the server.
What is the most likely problem with the firewall?
A.The ScreenOS firewall has no physical connection to the FTP server.
B.The ALG option on the ScreenOS firewall has not been enabled for FTP traffic.
C.The ScreenOS firewall does not have a route defined to the FTP servers' subnet.
D.The ScreenOS firewall does not have a route defined to the FTP clients subnet.
Answer: C

Juniper   JN0-521   JN0-521   JN0-521 exam prep   JN0-521 questions

NO.12 You are configuring an interface in the untrust zone with an IP address, telnet enabled, and WebUI
management.
Which sequence of steps must be performed to make the interface operational at the end of the
configuration sequence?
A.Assign the interface to a zone, define the IP address, enable Web and telnet services.
B.Assign the interface to a zone, define the IP address, accept default management services.
C.Assign the interface to a virtual router, define the IP address, enable Web and telnet services.
D.Assign the interface to a zone, define the IP address, define a manage IP address, accept default
management services.
Answer: A

Juniper braindump   JN0-521 answers real questions   JN0-521 exam simulations

NO.13 When changes are made to the running config during a WebUI management session, to what external
hardware component can the changes be saved?
A.FTP server
B.TFTP server
C.PC local disk
D.Compact Flash Card
Answer: C

Juniper answers real questions   JN0-521 pdf   JN0-521   JN0-521

NO.14 Which type of NAT is performed when you implement interface-based NAT?
A.source IP address translation
B.destination IP address translation
C.source IP and port address translation
D.destination IP and port address translation
Answer: C

Juniper   JN0-521 test questions   JN0-521 pdf   JN0-521

NO.15 By default, where are changes stored when a save command is issued from the CLI during a
management session?
A.NVRAM
B.internal flash
C.PCMCIA card
D.Compact Flash Card
Answer: B

Juniper certification training   JN0-521 test answers   JN0-521 exam simulations   JN0-521   JN0-521

NO.16 Click the Exhibit button.
In the exhibit, which two forms of address translation would have generated the output shown? (Choose
two.)
A.MIP
B.NAT-src with no DIP
C.Interface-based translation
D.NAT-src with a DIP, fixed-port disabled
Answer: BC

Juniper test answers   JN0-521 demo   JN0-521 certification training

NO.17 In the packet forwarding decision process, how is the second packet handled differently than the first
in a series of allowed interzone packets?
A.The second packet causes an ARP query.
B.The second packet is checked against the policy table.
C.The second packet is forwarded without a sanity check.
D.The second packet is forwarded without checking the route table.
Answer: D

Juniper answers real questions   JN0-521 certification   JN0-521 test answers   JN0-521 pdf

NO.18 What is the purpose of the VLAN1 interface?
A.It provides policy-based NAT for 802.1Q VLANs.
B.It provides an interface that can be used with 802.1Q VLANs in transparent mode.
C.It provides the ScreenOS device with a routable IP address while operating in route mode.
D.It provides an interface that can be used to remotely manage the ScreenOS device while operating in
transparent mode.
Answer: D

Juniper   JN0-521 exam   JN0-521   JN0-521   JN0-521

NO.19 What are two benefits of configuring a ScreenOS device in transparent mode? (Choose two.)
A.There is no need to reconfigure the IP addresses of routers or protected servers.
B.There is no need to create MIPs or VIPs for incoming traffic to reach protected servers.
C.Policies are easier to create since you do not have to include source and destination IP addresses.
D.The product can support more VPNs and obtain greater throughput because there is less overhead to
manage.
Answer: AB

Juniper test   JN0-521   JN0-521 exam prep

NO.20 Which command would you run to check IPSec Phase 1 active status?
A.get sa
B.get event 427
C.get sa active
D.get ike cookie
Answer: D

Juniper   JN0-521   JN0-521 braindump

NO.21 What is the purpose of the "Manage-IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which device is allowed to manage the ScreenOS device.
C.It is the address that an external device uses to gain management access to a ScreenOS device.
D.It defines a list of device addresses that can manage the ScreenOS device without being authenticated
prior to session establishment.
Answer: C

Juniper exam prep   JN0-521   JN0-521 pdf   JN0-521

NO.22 Which ScreenOS WebUI button reorders policies?
A.Shift
B.Move
C.Reorder
D.Transfer
Answer: B

Juniper   JN0-521   JN0-521   JN0-521 practice test

NO.23 What is the purpose of the "Permitted IP" address on a ScreenOS device?
A.It defines a list of addresses that are trusted to perform management on the ScreenOS device.
B.It is used in policy rules to determine which user traffic is allowed through the ScreenOS device.
C.It defines which range of addresses that can access devices connected to the ScreenOS device.
D.It is the address that an external device uses to gain management access to a ScreenOS device.
Answer: A

Juniper   JN0-521   JN0-521 practice test   JN0-521 exam dumps   JN0-521 certification training   JN0-521 exam prep

NO.24 A ScreenOS firewall is running in transparent mode. The firewall receives a packet which has no entry
in its forwarding table.
What will the firewall do?
A.Flood out all ports.
B.Check its route table for interzone destination.
C.Perform a policy lookup to determine the interfaces to which the source address is permitted, and flood
the packet out of those interfaces.
D.Perform a policy lookup to determine the zones to which the source address is permitted, and flood the
packet out the interfaces bound to those zones.
Answer: D

Juniper   JN0-521   JN0-521 test questions   JN0-521 dumps   JN0-521 answers real questions

NO.25 What will change the root admin password?
A.set admin password
B.set root-admin password
C.set admin password
D.set admin user password
Answer: A

Juniper braindump   JN0-521 questions   JN0-521   JN0-521 original questions   JN0-521   JN0-521 test questions

NO.26 When managing a ScreenOS device using the WebUI and performing an image upgrade, from which
hardware component will the ScreenOS image be loaded?
A.TFTP server
B.PC local disk
C.internal flash
D.Compact Flash Card
Answer: B

Juniper   JN0-521   JN0-521   JN0-521 original questions   JN0-521 pdf

NO.27 Which statement accurately describes the "config rollback" feature?
A.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a previously saved
configuration file from flash.
B.The "config rollback" feature is enabled by default, it allows the administrator to re-apply a previously
saved configuration file from flash.
C.Once the "config rollback" feature is enabled, it allows the administrator to re-apply a locked
configuration file from a separate area in flash.
D.Once the "config rollback" feature is enabled, it allows the administrator to revert to the prior ScreenOS
image or configuration file in the event an upgrade operation aborts.
Answer: C

Juniper original questions   JN0-521 answers real questions   JN0-521 original questions

NO.28 Which two statements are true in regards to a ScreenOS firewall in transparent mode? (Choose two.)
A.VPNs can terminate to the VLAN1 interface IP address.
B.Static routes must be configured if multiple virtual routers are going to be used.
C.It can be installed in a network without the requirement to reconfigure IP addressing schemes.
D.You must use the console port to manage the device as you cannot manage the device using an
Ethernet port.
Answer: AC

Juniper   JN0-521 study guide   JN0-521   JN0-521

NO.29 In the command, save config from tftp 1.1.7.250 abcd.cfg merge, which function does the merge
parameter specify?
A.The config file from the TFTP server will replace the configuration in RAM.
B.The config file from the TFTP server will replace the startup configuration file in internal flash.
C.The merge parameter is not valid for TFTP files, it is only valid for configuration files stored in internal
flash.
D.The config file from the TFTP server will be combined with the configuration file in RAM and the
combined result will be saved in internal flash.
Answer: D

Juniper test questions   JN0-521   JN0-521 original questions   JN0-521 practice test   JN0-521

NO.30 Telnet management has been enabled on an interface in the untrust zone.
What else should be completed to limit telnet access to the ScreenOS device from trusted management
PCs?
A.Define a permitted IP address.
B.Define a policy from trust to untrust.
C.Define a trusted IP in the address table.
D.Define a manage IP address on this interface.
Answer: A

Juniper test questions   JN0-521   JN0-521 braindump   JN0-521

IT-Tests.com offer the latest 000-456 Questions & Answers and high-quality 642-980 PDF Practice Test. Our HP2-N43 VCE testing engine and C-TFIN52-64 study guide can help you pass the real exam. High-quality 646-048 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/JN0-521.html