NS0-504 questions and answers

If you choose to sign up to participate in Network Appliance certification NS0-504 exams, you should choose a good learning material or training course to prepare for the examination right now. Because Network Appliance certification NS0-504 exam is difficult to pass. If you want to pass the exam, you must have a good preparation for the exam.

NS0-504 is an Network Appliance certification exam, so NS0-504 is the first step to set foot on the road of Network Appliance certification. NS0-504 certification exam become more and more fiery and more and more people participate in NS0-504 exam, but passing rate of NS0-504 certification exam is not very high.When you select NS0-504 exam, do you want to choose an exam training courses?

IT-Tests.com promise that we will spare no effort to help you pass Network Appliance certification NS0-504 exam. Now you can free download part of practice questions and answers of Network Appliance certification NS0-504 exam on IT-Tests. When you select IT-Tests, you can not only pass Network Appliance certification NS0-504 exam, but also have one year free update service. IT-Tests.com can also promise if you fail to pass the exam, IT-Tests.com will 100% refund.

The NS0-504 examination certification, as other world-renowned certification, will get international recognition and acceptance. People around the world prefer NS0-504 exam certification to make their careers more strengthened and successful. In IT-Tests.com, you can choose the products which are suitable for your learning ability to learn.

Exam Code: NS0-504
Exam Name: Network Appliance (NetApp Certified Implementation Engineer - SAN, Cluster-Mode)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 398 Questions and Answers
Last Update: 2013-11-21

NS0-504 (NetApp Certified Implementation Engineer - SAN, Cluster-Mode) Free Demo Download: http://www.it-tests.com/NS0-504.html

NO.1 Which commands allow you to enable NetApp deduplication and verify space savings?
A. sis on <vol>, sis start <vol>, df s <vol>
B. asis on <vol>, asis start <vol>, df s <vol>
C. sis on <vol>, sis start <vol>, df r <vol>
D. sis on, sis start, df p <vol>
Answer: A

Network Appliance   NS0-504   NS0-504 original questions   NS0-504

NO.2 When assessing a current storage solution, it is critical to document the current NetApp
storage
system configuration.
Which factor should NOT be considered when documenting this existing configuration?
A. Data ONTAP version
B. current data layout (RAID groups, aggregates, volumes, etc...)
C. storage system name and IP
D. host power cables and power usage
Answer: D

Network Appliance test   NS0-504 demo   NS0-504 test questions   NS0-504   NS0-504

NO.3 Which two Data ONTAP Cluster-Mode clone technology can clone an individual LUN inside a
volume without cloning the entire volume?
A. FlexClone
B. LUN Clone
C. Snap Clone
D. Vol Clone
E. Aggr Clone
Answer: B

Network Appliance braindump   NS0-504   NS0-504 study guide   NS0-504 test   NS0-504

NO.4 These are three methods of creating a LUN:
* lun create
* lun map
* lun setup
A. True
B. False
Answer: B

Network Appliance test questions   NS0-504 exam simulations   NS0-504 practice test   NS0-504   NS0-504 test answers

NO.5 A company wants to use jumbo frames in their Ethernet network. They should set the packet
size
to which industry conventional value?
A. 1200
B. 1500
C. 9000
D. 12000
Answer: C

Network Appliance exam dumps   NS0-504   NS0-504   NS0-504   NS0-504   NS0-504 exam

NO.6 You can avoid data corruption when you issue the cf forcetakeover -d command if the remote
node is ________.
A. in a giveback mode
B. fenced off manually
C. powered on and accessible
D. powered off and inaccessible
Answer: D

Network Appliance test questions   NS0-504 test questions   NS0-504 exam   NS0-504 exam prep

NO.7 When running diagnostic tests after an initial installation of a NetApp FAS3000 storage system,
which command is used to run a comprehensive set of diagnostic tests on the entire system?
A. all
B. comprehensive
C. full
D. stress
Answer: A

Network Appliance practice test   NS0-504   NS0-504 pdf   NS0-504 certification training

NO.8 Which command do you use on a Cisco switch to view the currently active zoneset?
A. show zone analysis
B. show zoneset active
C. show running-config
D. show config active
Answer: B

Network Appliance test answers   NS0-504 test questions   NS0-504 practice test   NS0-504 exam prep

NO.9 A snapshot is a frozen, read-only image of the entire Data ONTAP active file system that
reflects
the state of the ____________ at the time the snapshot was created.
A. qtrees
B. volume
C. directory
D. storage system
Answer: B

Network Appliance certification training   NS0-504 original questions   NS0-504   NS0-504 braindump

NO.10 Which feature makes it possible for a storage administrator to add more than two storage
systems
to a cluster?
A. Scale horizontal
B. Scale out
C. Scale up
D. Scale vertical
Answer: B

Network Appliance   NS0-504   NS0-504 exam prep   NS0-504 demo   NS0-504

IT-Tests.com offer the latest HP5-K01D Questions & Answers and high-quality NS0-155 PDF Practice Test. Our C_THR12_66 VCE testing engine and 000-276 study guide can help you pass the real exam. High-quality VCPC510 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/NS0-504.html