どうしてJPexamのDellのDC0-261試験トレーニング資料はほかのトレーニング資料よりはるかに人気があるのでしょうか。それはいくつかの理由があります。第一、JPexamは受験生の要求をよく知っています。しかも、他のどのサイトよりも良いサービスを提供します。第二、専心すること。我々が決まったことを完璧に作るためにすべての不要な機会を諦めなければなりません。第三、我々は確かに最高の製品を持っていますが、粗悪品の方式で表示されたら、もちろん粗悪品と見られますから、我々は自分の製品を創造的かつプロの方法で見せます。JPexamのDellのDC0-261試験トレーニング資料はこんなに成功するトレーニングですから、JPexamを選ばない理由はないです。
DC0-261はDellのひとつの認証で、DC0-261がDellに入るの第一歩として、DC0-261試験がますます人気があがって、DC0-261に参加するかたもだんだん多くなって、しかしDC0-261認証試験に合格することが非常に難しいで、君はDC0-261に関する試験科目の問題集を購入したいですか？
試験番号：DC0-261問題集
試験科目：Dell Storage Networking Professional Exam - Version 2
最近更新時間：2014-03-27
問題と解答：全124問
100％の返金保証。1年間の無料アップデート。
IT業界の一员として、君はまだIT認証試験を悩んでいますか？認証試験はITの専門知識を主なテストとして別に初めてIT関連の認証試験に参加する受験生にとってはとても難しいとみされます。良い対応性の訓練が必要で、JPexam の問題集をお勧めます。
この人材が多い社会で、人々はずっと自分の能力を高めていますが、世界で最先端のIT専門家に対する需要が継続的に拡大しています。ですから、DellのDC0-261認定試験に受かりたい人が多くなります。しかし、試験に受かるのは容易なことではないです。実は良いトレーニング資料を選んだら試験に合格することは不可能ではないです。JPexamが提供したDellのDC0-261試験トレーニング資料はあなたが試験に合格することを助けられます。JPexamのトレーニング資料は大勢な受験生に証明されたもので、国際的に他のサイトをずっと先んじています。DellのDC0-261認定試験に合格したいのなら、JPexamが提供したDellのDC0-261トレーニング資料をショッピングカートに入れましょう。
JPexamにIT業界のエリートのグループがあって、彼達は自分の経験と専門知識を使ってDell DC0-261認証試験に参加する方に対して問題集を研究続けています。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/DC0-261_exam.html
NO.1 How are the LUNs for the Write Intent Log (WIL) configured?
A. WIL LUNs are configured automatically.
B. After manually binding the LUNs, the WIL is automatically configured.
C. WIL LUNs must be manually bound and allocated on a per-array basis.
D. WIL LUNs must be manually bound and allocated on one array. The WIL is then automatically
replicated to the other array.
Answer: C
Dell認定証 DC0-261 DC0-261 DC0-261過去問
NO.2 You are concerned that the loss of an SP might cause you to lose all of your existing snapshot
sessions. What should you do to prevent losing existing snapshot sessions?
A. add a UPS to the storage array
B. use PowerPath to gain failover support
C. select the Persistent mode when starting a snapshot session
D. Nothing, the Vaulting process automatically saves all snapshots to disk in the PSM LUN.
Answer: C
Dell DC0-261 DC0-261参考書 DC0-261過去問 DC0-261練習問題
NO.3 You have installed SAN Copy. Which statement is true?
A. The storage array must be rebooted.
B. SAN Copy cannot be upgraded, except by a complete re-install.
C. Any LUN within the SAN is automatically made available to be copied.
D. The admhost utility must be installed on each storage array that Navisphere Manager resides on.
E. SAN Copy sessions can be managed through the Navisphere Manager Enterprise Storage window.
Answer: E
Dell DC0-261 DC0-261
NO.4 Which three statements are correct about SAN Copy? (Choose three.)
A. SAN Copy can be installed on any model CX array.
B. SAN Copy is a storage array-based Data Mover application.
C. SAN Copy transfers data over a Fibre Channel SAN, as opposed to an IP LAN.
D. SAN Copy sessions can be managed either by Navisphere Manager or by CLI.
Answer: BCD
Dell DC0-261練習問題 DC0-261練習問題 DC0-261認定試験
NO.5 Which two tasks can Navisphere Analyzer perform? (Choose two.)
A. comparing archived and real-time performance data
B. tracking performance trends for Dell / EMC switches
C. tracking performance trends for Dell / EMC storage arrays
D. tracking performance trends for hosts connected to Dell / EMC Storage Area Networks (SANs)
Answer: AC
Dell認定試験 DC0-261 DC0-261練習問題 DC0-261 DC0-261認定資格
NO.6 Which utility should you use to add LUN management functionality to a server when using SAN Copy?
A. naviadm
B. admhost
C. admcopy
D. admsnap
Answer: B
Dell DC0-261 DC0-261 DC0-261練習問題
NO.7 Which three statements are correct about clones? (Choose three.)
A. Clones can be copied using SAN Copy to a remote storage array.
B. Clones typically consume about 20% of the size of the source LUN.
C. Fractured clones can later be synchronized with the source LUN to update the contents.
D. Clones can be fractured from the source LUN, then mounted to a secondary host and accessed just
like another LUN.
Answer: ACD
Dell認定証 DC0-261 DC0-261 DC0-261
NO.8 Which two states can a clone LUN be in before it can be fractured? (Choose two.)
A. consistent
B. synchronizing
C. synchronized
D. reverse out-of-sync
Answer: AC
Dell過去問 DC0-261認定資格 DC0-261認定試験 DC0-261 DC0-261認定試験
NO.9 You want to implement site level disaster recovery. Which two are valid options to consider? (Choose
two.)
A. Use SAN Copy to copy LUNs from the primary site to the recovery site.
B. Use SAN Copy to mirror a LUN from the primary site to the recovery site.
C. Use MirrorView to mirror LUNs from the primary site to another local array.
D. Use SnapView to create a clone, then use SAN Copy to copy the clone to the recovery site.
Answer: AD
Dell DC0-261 DC0-261認証試験 DC0-261問題集
NO.10 You have a source LUN on a CX500 for which you maintain snapshots for tape backup. You need to
create a new snapshot for this source LUN but are unable to do so. You can create snapshots of other
source LUNs on the array. What is the most likely problem?
A. You have reached the maximum limit of 50 Cache LUNs.
B. You have reached the maximum limit of 8 snapshots per source LUN.
C. You have reached the maximum limit of 150 snapshots per storage system.
D. You have reached the maximum limit of 300 snapshots per storage system.
Answer: B
Dell DC0-261 DC0-261 DC0-261
NO.11 Which four LUN characteristics can be displayed in Navisphere Analyzer? (Choose four.)
A. Bytes Tx / Rx
B. Utilization (%)
C. Capacity (GB)
D. Response Time (ms)
E. Total Bandwidth (MB/sec.)
F. Total Throughput (I/O /sec.)
Answer: BDEF
Dell DC0-261参考書 DC0-261参考書 DC0-261
NO.12 You want User1 to have Administrator access to storage system A that is located in a branch office.
However, you want User1 to have read-only access to the remaining storage systems within the domain.
Which scenario best accomplishes this task?
A. User accounts must be either global or local because the user inherits the most restrictive role
assigned to the user.
B. Create a local account with Administrator access on storage system A, then create a global account for
User1 with Monitor access.
C. Create a global account with Monitor access on storage system A, then modify the account policy to
allow User1 to administer only storage system A.
D. Create a global account with Monitor access on the master node, then have User1 log in to storage
system A using the local default manager account.
Answer: B
Dell認定証 DC0-261 DC0-261問題集 DC0-261
NO.13 You are connecting a CX700 to a CX500 through a fabric for Mirrorview. Which two zones must be
completed? (Choose two.)
A. Port 1 on SPA of the CX700 must be zoned so that it can communicate with port 1 on SPA of the
CX500.
B. Port 1 on SPB of the CX700 must be zoned so that it can communicate with port 1 on SPB of the
CX500.
C. Port 3 on SPA of the CX700 must be zoned so that it can communicate with port 1 on SPA of the
CX500.
D. Port 3 on SPB of the CX700 must be zoned so that it can communicate with port 1 on SPB of the
CX500.
Answer: CD
Dell認定証 DC0-261過去問 DC0-261認定資格 DC0-261認証試験 DC0-261
NO.14 Which three statements are correct about using SnapView? (Choose three.)
A. Snapshots can take mere seconds to create.
B. Snapshots may be created using the admhost CLI utility.
C. SnapView can take snapshots, or point-in-time copies of LUNs.
D. SnapView can make clones, or 100% duplicate copies of a LUN.
E. Snapshots are volume-level and thus able to restore specific files.
Answer: ACD
Dell認定資格 DC0-261過去問 DC0-261 DC0-261 DC0-261認定資格 DC0-261過去問
NO.15 Which statement best describes bi-directional mirroring as implemented by MirrorView ?
A. By utilizing two storage systems, a single storage system can be configured as the primary for one
mirror and a secondary for another mirror.
B. By utilizing two storage systems and one tape drive, the two storage systems are configured as a
primary and the secondary is backed up to tape.
C. By utilizing two storage systems, a single storage system is configured as the primary and the other
storage system is configured as the secondary.
D. By utilizing three storage systems, the two storage systems are configured as a primary and the third
storage system is configured as a secondary that is used to store the primary images.
Answer: A
Dell認定資格 DC0-261問題集 DC0-261
NO.16 How many LUNs are required for the Clone Private LUN?
A. one per SP
B. one per clone
C. one per clone group
D. one per storage system
Answer: A
Dell DC0-261 DC0-261 DC0-261問題集 DC0-261
NO.17 What steps should you perform to create a copy of a source LUN in a second storage array, while
minimizing unavailability of the source LUN?
A. use SAN Copy to copy the source LUN, then take a snapshot on the second storage array
B. take a snapshot of the source LUN, then use SAN Copy to copy the snapshot to the second storage
array
C. take a snapshot of the source LUN, then use SAN Copy to copy the source LUN to the second storage
array
D. take a snapshot of the source LUN, run MirrorView to mirror the snapshot to the second array, then
use SAN Copy to synchronize the mirror with the source LUN
Answer: B
Dell認定試験 DC0-261 DC0-261問題集 DC0-261 DC0-261問題集 DC0-261認定証
NO.18 SAN Copy sessions offer which three capabilities? (Choose three.)
A. providing content push or pull capability
B. offloading Storage Array processing onto hosts
C. migrating data from older arrays to newer arrays in the same SAN fabric
D. distributing and collecting content between the central location and branch offices
Answer: ACD
Dell DC0-261認定証 DC0-261練習問題 DC0-261 DC0-261参考書 DC0-261認定証
NO.19 Which two are examples of how SnapView can be used in conjunction with MirrorView? (Choose two.)
A. SnapView can be used to take a snapshot of the remote mirror for use at the remote site.
B. SnapView can be used to take a snapshot of the remote mirror and then back up the snapshot to tape.
C. SnapView can be used to take a snapshot of the primary mirror and then mirror the snapshot to the
remote site.
D. SnapView can be used to take a snapshot of the remote mirror and then clone the snapshot for use at
the primary site.
Answer: AB
Dell DC0-261 DC0-261認定試験
NO.20 Which three operations are possible using clones? (Choose three.)
A. Up to eight clones can be made from a single source LUN.
B. While a clone is fractured, it can be connected to a host for use.
C. A fractured clone can be accessed for read and write operations.
D. A snapshot of a clone must be reverse synchronized prior to mounting.
E. A live clone can be mounted by a secondary host to use as a standard LUN.
Answer: ABC
Dell DC0-261 DC0-261参考書
JPexamは最新の074-409問題集と高品質のICBB問題と回答を提供します。JPexamのHP2-B101 VCEテストエンジンと1Z0-807試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC2040-442 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论