JPexamはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がJPexamの問題集を使うので試験に合格しますた。彼らはJPexamの問題集が有効なこと確認しました。JPexamが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。
JPexamを通してMicrosoft 70-681試験に合格することがやすくて、Microsoft 70-681試験をはじめて受ける方はJPexamの商品を選んで無料なサンプル（例年の試験問題集と解析）をダウンロードしてから、楽に試験の現場の雰囲気を体験することができます。オンラインにいろいろなMicrosoft 70-681試験集があるですけれども、弊社の商品は一番高品質で低価額で、試験の問題が絶えず切れない更新でテストの内容ともっとも真実と近づいてお客様の合格が保証いたします。それほかに、弊社の商品を選んで、勉強の時間も長くではありません。できるだけ早くMicrosoft 70-681認定試験を通ろう。
あなたの予算が限られている場合に完全な問題集を必要としたら、JPexamのMicrosoftの74-344試験トレーニング資料を試してみてください。JPexamはあなたのIT認証試験の護衛になれて、現在インターネットで一番人気があるトレーニング資料が提供されたサイトです。Microsoftの74-344試験はあなたのキャリアのマイルストーンで、競争が激しいこの時代で、これまで以上に重要になりました。あなたは一回で気楽に試験に合格することを保証します。将来で新しいチャンスを作って、仕事が楽しげにやらせます。JPexamの値段よりそれが創造する価値ははるかに大きいです。
JPexamのMicrosoftの74-344試験問題資料は質が良くて値段が安い製品です。我々は低い価格と高品質の模擬問題で受験生の皆様に捧げています。我々は心からあなたが首尾よく試験に合格することを願っています。あなたに便利なオンラインサービスを提供して、Microsoft 74-344試験問題についての全ての質問を解決して差し上げます。
試験番号：070-595問題集試験科目：TS: Developing Business Process and Integration Solutions by Using Microsoft BizTalk Server 2010
最近更新時間：2014-05-03
問題と解答：全57問 070-595 全真模擬試験
100％の返金保証。1年間の無料アップデート。
>>詳しい紹介はこちら
試験番号：70-681問題集試験科目：TS: Windows 7 and Office 2010, Deploying
最近更新時間：2014-05-03
問題と解答：全85問 70-681 資格認定
100％の返金保証。1年間の無料アップデート。
>>詳しい紹介はこちら
試験番号：74-344問題集試験科目：Managing Programs and Projects with Project Server 2013
最近更新時間：2014-05-03
問題と解答：全97問 74-344 試験過去問
100％の返金保証。1年間の無料アップデート。
>>詳しい紹介はこちら
JPexamの74-344問題集を利用してみたらどうですか。この問題集は最近更新されたもので、実際試験で出題される可能性がある問題をすべて含んでいて、あなたが一回で成功することを保証できますから。この問題集は信じられないほどの良い成果を見せます。試験に失敗すればJPexamは全額返金のことができますから、ご安心に問題集を利用してください。JPexamの74-344試験参考書できっとあなたが望ましい成功を取られます。
あなたの夢は何ですか。あなたのキャリアでいくつかの輝かしい業績を行うことを望まないのですか。きっと望んでいるでしょう。では、常に自分自身をアップグレードする必要があります。IT業種で仕事しているあなたは、夢を達成するためにどんな方法を利用するつもりですか。実際には、IT認定試験を受験して認証資格を取るのは一つの良い方法です。最近、Microsoftの74-344試験は非常に人気のある認定試験です。あなたもこの試験の認定資格を取得したいのですか。さて、はやく試験を申し込みましょう。JPexamはあなたを助けることができますから、心配する必要がないですよ。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/070-595_exam.html
NO.1 A BizTalk Server 2010 application contains an orchestration with one receive port and one send port.
You evaluate the runtime behavior of the orchestration by viewing the promoted properties of any inbound
and outbound messages of the orchestration.
You need to modify the application so that you can view these promoted properties on the BizTalk Server
Group Hub page.
What should you do?
A. In Orchestration Designer, change the Type Modifier property to Public. Redeploy the orchestration.
B. In Orchestration Designer, change the Report To Analyst property to True. Redeploy the orchestration.
Create filters on the receive port receive location that evaluate the messages promoted properties.
C. In the BizTalk Administration console, modify the orchestration properties. Under Track Message
Properties, select the check boxes for incoming and outgoing messages.
D. In the BizTalk Administration console, modify the orchestration properties. Under Track Message
Bodies, select Before orchestration processing and After orchestration processing.
Answer: C
Microsoft 攻略 070-595 過去問 070-595 体験
NO.2 A company uses BizTalk Server 2010 to receive electronic orders from multiple customers. You have
schemas for all the order formats that the customers send.
You need to create a business process that handles an incoming order.
You create a canonical schema that represents an order. You also create an orchestration that handles an
order of the canonical schema. What should you do next?
A. Create maps from the canonical schema to each of the customer order formats. Create a send port and
bind it to the orchestration. Use the maps on the send port.
B. Create maps from the canonical schema to each of the customer order formats. Create a receive port
and location and bind the port to the orchestration. Use the maps on the receive port.
C.Create maps from each of the customer order formats to the canonical schema. Create a send port and
bind it to the orchestration. Use the maps on the send port.
D. Create maps from each of the customer order formats to the canonical schema. Create a receive port
and location and bind the port to the orchestration. Use the maps on the receive port.
Answer: D
Microsoft 講座 070-595 070-595 赤本
NO.3 A BizTalk Server 2010 application sends purchase orders. Current applications use an existing mail
server to send mail. The purchase order application should use a distribution list that is managed by a
new mail server. Company IT policy does not allow you to create a new host for the new mail server.
You need to create a BizTalk port that sends orders to the email distribution list through the new mail
server.
What should you do?
A. Create an SMTP send port configured to send to the email distribution list. Specify the name of the new
mail server in Microsoft Internet Information Services (IIS) Manager.
B. Create an SMTP send port configured to send to the email distribution list. Create a filter on the send
port with the SMTP.SMTPHost context property equal to the new mail server.
C. Create a send port group with an SMTP send port configured to send to the email distribution list.
Create a filter on the send port group with the SMTP.SMTPHost context property equal to the new mail
server.
D. Create an SMTP send port configured to send to the email distribution list. Override the current SMTP
send handler settings by entering the new mail server in the SMTP server name field in the Handler
Override section of the port.
Answer: D
Microsoft 070-595 教育 070-595 方法 070-595 教本
NO.4 You are developing a solution for BizTalk Server 2010. You deploy the solution to the runtime
environment. The solution includes one orchestration with a direct bound send port that sends a message
to the BizTalk MessageBox database for routing to a folder.
After starting the BizTalk application for testing, you notice that the following error is logged in the servers
event log:
The published message could not be routed because no subscribers were found. This error occurs if the
subscribing orchestration or send port has not been enlisted, or if some of the message properties
necessary for subscription evaluation have not been promoted. Please use the BizTalk Administration
console to troubleshoot this failure.
You need to resolve the error without changing the code in the orchestration and without redeploying the
solution.
What should you do?
A. Add a dynamic send port.
B. Add a send port that has a filter that matches the message type.
C. Add a send port that uses the XmlTransmit pipeline.
D. Add a receive port that uses the XmlReceive pipeline.
Answer: B
Microsoft 書籍 070-595 認証試験 070-595 070-595 認定資格
NO.5 A BizTalk Server 2010 solution contains a map that transforms an internal order format into the order
format of a supplier. You have examples of the internal order.
You need to perform unit testing to make sure that the map works.
You add a test project and a test class to the solution. You then add a reference to the project with the
map. What should you do next?
A. Add a reference to Microsoft.XLANGs.BaseTypes and to Microsoft.BizTalk.BaseFunctoids. Use the
TestableMapBase class to test the map.
B. Add a reference to Microsoft.XLANGs.BaseTypes and to Microsoft.BizTalk.BaseFunctoids. Use the
TestableSchemaBase class to test the schema.
C. Add a reference to Microsoft.BizTalk.TestTools and to Microsoft.XLANGs.BaseTypes. Use the
TestableMapBase class to test the map.
D. Add a reference to Microsoft.BizTalk.TestTools and to Microsoft.BizTalk.BaseFunctoids. Use the
TestableMapBase class to test the map.
Answer: C
Microsoft 一発合格 070-595 スクール 070-595 参考書 070-595 日記 070-595 参考書
NO.6 A BizTalk Server 2010 solution sends out XML invoices to a customer on a regular basis. The customer
has sent you the public key part of their certificate. You installed this certificate on the server and set up a
send port to use this certificate. The certification authority for the certificate is one that you already trust.
You need to ensure that all invoices sent to the customer are encrypted using the provided public key.
What should you do?
A. Create a custom pipeline that uses the MIME/SMIME encoder component. Set the Add signing
certification to message property of the component to True.
B. Create a custom pipeline that uses the MIME/SMIME encoder component. Set the Enable encryption
property of the component to True.
C. Create a custom pipeline that uses the MIME/SMIME encoder component. Set the Content transfer
encoding property of the component to Base64.
D. Create a custom pipeline that uses the default XML assembler component. Use the default values for
all properties of the component.
Answer: B
Microsoft 教本 070-595 資格 070-595 短期
NO.7 A BizTalk Server 2010 application is designed to receive a file from a customer.
The customer periodically updates the file on an FTP site. The file has a name that never changes. You
have been given read-only permissions to the site.
You need to create a receive location that detects when the file has been updated and then retrieves it.
You use the BizTalk Administration console to create a receive port. What should you do next?
A. Create an FTP receive location and set the Mode property to Passive.
B. Create an FTP receive location and set the Target File Name property to *.*.
C. Create an FTP receive location with the site and credential information. In the FTP adapter properties,
set the Delete After Download property to No and set the Enable Timestamp Comparison property to Yes.
D. Create an FTP receive location with the site and credential information. In the FTP adapter properties,
set the Delete After Download property to Yes and set the Enable Timestamp Comparison property to
Yes.
Answer: C
Microsoft 070-595 内容 070-595 関節
NO.8 A solution in Microsoft Visual Studio 2010 contains a test project with unit tests for a BizTalk Server 2010
schema.
When the test project is built, an error occurs that indicates that the tested schema does not contain a
definition for ValidateInstance or an extension method with this name.
You need ensure that the project builds in Visual Studio 2010 without errors.
What should you do?
A. Set Redeploy to False in the project properties for the schema project.
B. Set Enable Unit Testing to True in the project properties for the schema project.
C. Check Enable Code Analysis on Build in the project properties for the test project.
D. Sign the assembly with a strong name key in the project properties for the schema project.
Answer: B
Microsoft 体験 070-595 方法 070-595 勉強法 070-595 070-595 方法 070-595
没有评论:
发表评论