显示标签为“117-101”的博文。显示所有博文
显示标签为“117-101”的博文。显示所有博文

2014年4月20日星期日

最も優秀なLpi 117-101試験問題集のサンプルを試す

Lpiの117-101認定試験は現在のIT領域で本当に人気がある試験です。この試験の認証資格を取るのは昇進したい人々の一番良く、最も効果的な選択です。しかも、この試験を通して、あなたも自分の技能を高めて、仕事に役に立つスキルを多くマスターすることができます。そうすれば、あなたはもっと素敵に自分の仕事をやることができ、あなたの優れた能力を他の人に見せることができます。この方法だけであなたはより多くの機会を得ることができます。

Lpiの117-101認定試験に受かることを悩んでいたら、JPexamを選びましょう。JPexamのLpiの117-101試験トレーニング資料は間違いなく最高のトレーニング資料ですから、それを選ぶことはあなたにとって最高の選択です。IT専門家になりたいですか。そうだったら、JPexamを利用したください。

人生には様々な選択があります。選択は必ずしも絶対な幸福をもたらさないかもしれませんが、あなたに変化のチャンスを与えます。JPexamのLpiの117-101試験トレーニング資料はIT職員としてのあなたがIT試験に受かる不可欠なトレーニング資料です。JPexamのLpiの117-101試験トレーニング資料はカバー率が高くて、更新のスピードも速くて、完全なトレーニング資料ですから、JPexam を手に入れたら、全てのIT認証が恐くなくなります。

現在の社会の中で優秀なIT人材が揃て、競争も自ずからとても大きくなって、だから多くの方はITに関する試験に参加してIT業界での地位のために奮闘しています。117-101はLpiの一つ重要な認証試験で多くのIT専門スタッフが認証される重要な試験です。

117-101認定試験の資格を取得するのは容易ではないことは、すべてのIT職員がよくわかっています。しかし、117-101認定試験を受けて資格を得ることは自分の技能を高めてよりよく自分の価値を証明する良い方法ですから、選択しなければならならないです。ところで、受験生の皆さんを簡単にIT認定試験に合格させられる方法がないですか。もちろんありますよ。JPexamの問題集を利用することは正にその最良の方法です。JPexamはあなたが必要とするすべての117-101参考資料を持っていますから、きっとあなたのニーズを満たすことができます。JPexamのウェブサイトに行ってもっとたくさんの情報をブラウズして、あなたがほしい試験117-101参考書を見つけてください。

JPexamにたくさんのIT専門人士がいって、弊社の問題集に社会のITエリートが認定されて、弊社の問題集は試験の大幅カーバして、合格率が100%にまで達します。弊社のみたいなウエブサイトが多くても、彼たちは君の学習についてガイドやオンラインサービスを提供するかもしれないが、弊社はそちらにより勝ちます。JPexamは同業の中でそんなに良い地位を取るの原因は弊社のかなり正確な試験の練習問題と解答そえに迅速の更新で、このようにとても良い成績がとられています。そして、弊社が提供した問題集を安心で使用して、試験を安心で受けて、君のLpi 117-101認証試験の100%の合格率を保証しますす。

JPexamはもっぱらITプロ認証試験に関する知識を提供するのサイトで、ほかのサイト使った人はJPexamが最高の知識源サイトと比較しますた。JPexamの商品はとても頼もしい試験の練習問題と解答は非常に正確でございます。

試験番号:117-101問題集
試験科目:Lpi Level 1 Exam 101(with rpm)
最近更新時間:2014-04-20
問題と解答:全289問
100%の返金保証。1年間の無料アップデート。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/117-101_exam.html

NO.1 You've downloaded an image file of a boot floppy disk to your hard drive. What is the best utility to
create a boot floppy from the disk image? (Specify a single command without options.) Answer:
A. DD,/BIN/DD
Answer: A

Lpi   117-101   117-101認定資格

NO.2 When in Normal mode in vi, which command character will insert a blank line below the current cursor
position and place the insert cursor at the beginning of the new line?
A. a
B. i
C. n
D. o
Answer: D

Lpi認定資格   117-101   117-101

NO.3 Which of the following sed commands will replace all instances of the string foo with the string foobar
changing the file file1.txt in place.?
A. sed 's/foo/foobar/g' file1.txt
B. sed 's/foo/foobar/g' file1.txt > file1.txt
C. sed 's/foo/foobar/g' file1.txt | file1.txt
D. sed -i 's/foo/foobar/g' file1.txt
E. sed -i 's/foo/foobar/g' file1.txt > file1.txt
Answer: D

Lpi   117-101   117-101   117-101過去問   117-101認定試験   117-101

NO.4 What is the purpose of the Bash built-in export command?
A. To allow disks to be mounted remotely.
B. To automate the export of variables for subsequently executed commands.
C. To make the command history available to sub-shells.
D. To run a command as a process in a sub-shell.
E. To save variable settings for future shell invocations.
Answer: B

Lpi   117-101   117-101   117-101

NO.5 Which directory contains additional information about installed packages?
A. /usr/share/documentation
B. /usr/local/share/documentation
C. /usr/local/doc
D. /usr/share/doc
E. /usr/packages/doc
Answer: D

Lpi   117-101   117-101参考書

NO.6 Which of the following commands will NOT update the Modify timestamp on the file /tmp/myfile.txt?
A. file /tmp/myfile.txt
B. echo "Hello" >/tmp/myfile.txt
C. sed -ie "s/1/2/" /tmp/myfile.txt
D. echo -n "Hello" >>/tmp/myfile.txt
E. touch /tmp/myfile.txt
Answer: A

Lpi参考書   117-101   117-101   117-101

NO.7 Which of the following is a limitation of the cut command?
A. The cut command can only select output by field position.
B. The cut command cannot reorder fields.
C. The cut command only works on ASCII text.
D. The cut command will always print one line of output for every line of input.
Answer: B

Lpi認定資格   117-101   117-101   117-101

NO.8 What command line redirection characters instruct the shell to read from the current input source until a
specific word, on a separate line and without any trailing spaces, is reached?
A. <<
B. <|
C. !<
D. &<
Answer: A

Lpi認定資格   117-101認定試験   117-101   117-101

NO.9 Once a shell variable has been created, how can the variable be removed from the environment?
A. VAR=
B. set -d VAR
C. set -u VAR
D. unset VAR
Answer: D

Lpi認定証   117-101認証試験   117-101   117-101練習問題   117-101練習問題

NO.10 In bash, inserting 2>&1 after a command redirects
A. standard error to standard input.
B. standard input to standard error.
C. standard output to standard error.
D. standard error to standard output.
E. standard output to standard input.
Answer: D

Lpi練習問題   117-101参考書   117-101過去問   117-101認定証   117-101   117-101

NO.11 Which of the following commands will send output from the program myapp to both standard output
(stdout) and the file file1.log?
A. cat < myapp | cat > file1.log
B. myapp 0>&1 | cat > file1.log
C. myapp | cat > file1.log
D. myapp | tee file1.log
E. tee myapp file1.log
Answer: D

Lpi   117-101認定試験   117-101   117-101参考書   117-101

NO.12 Which signal is sent by the kill command by default?
A. HUP(1)
B. QUIT(3)
C. KILL(9)
D. TERM(15)
Answer: D

Lpi過去問   117-101問題集   117-101   117-101過去問   117-101問題集   117-101認定試験

NO.13 To change the priority of a running process, you use the ____ command. (Specify command only
with no options.) Answer:
A. RENICE,/USR/BIN/RENICE
Answer: A

Lpi過去問   117-101   117-101

NO.14 Which command will show you the contents of a gzip compressed tar archive?
A. gzip archive.tgz | tar xvf -
B. tar ztf archive.tgz
C. gzip -d archive.tgz | tar tvf -
D. tar cf archive.tgz
Answer: B

Lpi認定資格   117-101参考書   117-101練習問題   117-101認定証

NO.15 When in Normal mode in vi, which command character can be used to begin a reverse search of the
text?
A. ?
B. /
C. F
D. r
Answer: A

Lpi練習問題   117-101認定資格   117-101認証試験   117-101   117-101練習問題

NO.16 Which of the following commands will NOT execute the bash script /usr/local/bin/runme.sh?
A. source /usr/local/bin/runme.sh
B.. /usr/local/bin/runme.sh
C. /bin/bash /usr/local/bin/runme.sh
D. /usr/local/bin/runme.sh
E. run /usr/local/bin/runme.sh
Answer: E

Lpi過去問   117-101問題集   117-101認定試験   117-101   117-101

NO.17 In order to use the output of ls to overwrite a file called bazz, which of the following command lines
would you use?
A. ls > bazz
B. ls >& bazz
C. ls &> bazz
D. ls >> bazz
Answer: A

Lpi認定資格   117-101参考書   117-101   117-101

NO.18 To ensure that a running process continues to execute after you log out, the process should be started
with what command?
A. live
B. nohup
C. saferun
D. sh
Answer: B

Lpi   117-101認証試験   117-101認定証   117-101

NO.19 The priority of any process can range from -20 to ________. (Provide only the numerical value) Answer:
A. 19,+19
Answer: A

Lpi練習問題   117-101参考書   117-101   117-101

NO.20 Which command will convert all tab characters in a file to spaces and print that to standard out?
A. convert
B. expand
C. retab
D. untab
Answer: B

Lpi   117-101   117-101   117-101

JPexamは最新の1z0-460問題集と高品質の1Y0-400問題と回答を提供します。JPexamの642-427 VCEテストエンジンと1Y0-A26試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のE20-385 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/117-101_exam.html

2014年3月13日星期四

Lpi 117-303 117-199 117-102 117-101認証試験の問題集のサンプルを参考しよう

現在の社会の中で優秀なIT人材が揃て、競争も自ずからとても大きくなって、だから多くの方はITに関する試験に参加してIT業界での地位のために奮闘しています。117-303 117-199 117-102 117-101はLpiの一つ重要な認証試験で多くのIT専門スタッフが認証される重要な試験です。

IT業種で仕事している皆さんが現在最も受験したい認定試験はLpiの認定試験のようですね。広く認証されている認証試験として、Lpiの試験はますます人気があるようになっています。その中で、117-303 117-199 117-102 117-101認定試験が最も重要な一つです。この試験の認定資格はあなたが高い技能を身につけていることも証明できます。しかし、試験の大切さと同じ、この試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。JPexamは117-303 117-199 117-102 117-101認定試験に合格することを助けてあげますから。

JPexamは当面最新のLpiの117-303 117-199 117-102 117-101の認証試験の準備問題を提供している認証された候補者のリーダーです。弊社の資源はずっと改訂され、アップデートされていますから、緊密な相関関係があります。Lpiの117-303 117-199 117-102 117-101の認証試験を準備しているあなたは、自分がトレーニングを選んで、しかも次の問題を受かったほうがいいです。弊社の試験問題はほとんど毎月で一回アップデートしますから、あなたは市場で一番新鮮な、しかも依頼できる良い資源を得ることができることを保証いたします。

Lpiの117-303 117-199 117-102 117-101認定試験に関連する知識を学んで自分のスキルを向上させ、117-303 117-199 117-102 117-101認証資格を通して他人の認可を得たいですか。Lpiの認定試験はあなたが自分自身のレベルを高めることができます。117-303 117-199 117-102 117-101認定試験の資格を取ったら、あなたがより良く仕事をすることができます。この試験が非常に困難ですが、実は試験の準備時に一生懸命である必要はありません。JPexamの117-303 117-199 117-102 117-101問題集を利用してから、一回で試験に合格することができるだけでなく、試験に必要な技能を身につけることもできます。

神様は私を実力を持っている人間にして、美しい人形ではないです。IT業種を選んだ私は自分の実力を証明したのです。しかし、神様はずっと私を向上させることを要求します。Lpi117-303 117-199 117-102 117-101試験を受けることは私の人生の挑戦の一つです。でも大丈夫です。JPexamのLpi117-303 117-199 117-102 117-101試験トレーニング資料を購入しましたから。すると、Lpi117-303 117-199 117-102 117-101試験に合格する実力を持つようになりました。 JPexamのLpi117-303 117-199 117-102 117-101試験トレーニング資料を持つことは明るい未来を持つことと同じです。

試験番号:117-303問題集
試験科目:LPI Level 3 Exam 303
最近更新時間:2014-03-13
問題と解答:全101問
100%の返金保証。1年間の無料アップデート。

試験番号:117-199問題集
試験科目:Ubuntu Level 1 Exam
最近更新時間:2014-03-13
問題と解答:全94問
100%の返金保証。1年間の無料アップデート。

試験番号:117-102問題集
試験科目:Lpi Level 1 Exam 102
最近更新時間:2014-03-13
問題と解答:全568問
100%の返金保証。1年間の無料アップデート。

試験番号:117-101問題集
試験科目:Lpi Level 1 Exam 101(with rpm)
最近更新時間:2014-03-13
問題と解答:全289問
100%の返金保証。1年間の無料アップデート。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/117-303_exam.html

NO.1 Which directive in the OpenVPN client.conf specifies the remote server and port that the client should
connect to? (Provide only the directive, without any options or parameters)
Answer: remote

Lpi   117-303認定試験   117-303過去問

NO.2 An administrator has successfully configured a cryptographic volume for dmcrypt, and has added the
following line to /etc/fstab:
/dev/mapper/cryptvol /media/crypt auto defaults 0 0
Upon booting the system, the error message "mount: special device /dev/mapper/cryptvol does not exist"
is displayed. What configuration file has the administrator forgotten to edit? (Provide the full path and
filename)
Answer: /etc/crypttab

NO.3 What does ntop use for data collection?
A. Network packets
B. Log files
C. Frame relay
D. SNMP
Answer: A

Lpi   117-303認定資格   117-303

NO.4 Which of the following export options, when specified in /etc/exports, will tell the server to use the
NFSv4 Pseudofilesystem?
A. fsid=2
B. fsid=0
C. fsid=3
D. fsid=1
Answer: B

Lpi認定資格   117-303   117-303

NO.5 An administrator has created a mapping with the following command:
cryptsetup luksOpen /dev/sda1 cryptvol
and has set three different keys. Which command below will delete the first key?
A. cryptsetup luksDelKey /dev/sda1 0
B. cryptsetup luksDelKey /dev/sda1 1
C. cryptsetup luksDelKey /dev/mapper/cryptvol 1
D. cryptsetup luksDelKey /dev/mapper/cryptvol 0
Answer: A

Lpi認定証   117-303   117-303   117-303

NO.6 In which of the following scenarios MUST an administrator use ethernet bridging instead of routing
when configuring an OpenVPN site? (Select TWO correct answers)
A. Some OpenVPN clients will be installed on laptops and must be able to connect from different
locations.
B. NetBIOS traffic must be able to traverse the VPN without implementing a WINS server.
C. The IPv4 protocol is required.
D. It will be necessary to use an MTU setting other than the default.
E. The IPX protocol is required.
Answer: BE

Lpi認定証   117-303認定証   117-303認証試験   117-303練習問題   117-303

NO.7 You wish to revoke write access for all groups and named users on a file. Which command will make
the correct ACL changes?
A. setfacl x group:*:rx,user:*:rx afile
B. setfacl x mask::rx afile
C. setfacl m mask::rx afile
D. setfacl m group:*:rx,user:*:rx afile
Answer: C

Lpi   117-303   117-303参考書   117-303   117-303

NO.8 SELinux has just been installed on a Linux system and the administrator wants to use SELinux in
permissive mode in order to audit the various services on the system. What command will switch
SELinux into permissive mode?
A. setenforce 0
B. /etc/init.d/selinux stop
C. selinux passive
D. /etc/init.d/selinux startpassive
Answer: A

Lpi練習問題   117-303練習問題   117-303

NO.9 An administrator has just configured an OpenVPN client. Upon starting the service, the following
message is displayed:
TLS Error: TLS key negotiation failed to occur within 60 seconds
Which of the following statements is true?
A. The client was unable to establish a network connection with the server.
B. The client was able to establish a network connection with the server, however TLS key negotiation
failed, resulting in a fallback to SSL.
C. The client was able to establish a network connection with the server, however TLS and SSL security
are not enabled.
D. The client was able to establish a network connection with the server, however TLS key negotiation
took longer than 60 seconds, indicating that there may be a problem with network performance.
Answer: A

Lpi問題集   117-303   117-303認定証   117-303参考書

NO.10 You are certain that your kernel has been compiled with ACL support, however, when you try to set an
ACL on a file, you get the following output:
% setfacl m user:hugh:r afile.txt
setfacl: afile.txt: Operation not supported
What is the most likely reason for this problem?
A. There is an error in the command line parameters.
B. There is no user on the system named hugh.
C. The partition has not been mounted with the acl option.
D. The file afile.txt doesn't exist.
Answer: C

Lpi認定資格   117-303練習問題   117-303   117-303   117-303

NO.11 Which of the following are common techniques for securing a sendmail server? (Select THREE correct
answers)
A. Maintain user accounts in an LDAP directory.
B. Enable TLS.
C. Disable VRFY.
D. Run sendmail in a chroot'd environment.
E. Disable USRLKUP.
Answer: BCD

Lpi   117-303問題集   117-303   117-303認定資格

NO.12 What is the default UDP port for OpenVPN traffic?
Answer: 1194

NO.13 What command will list basic information about all targets available to cryptmount? (Provide the
command with any options or parameters)
Answer: cryptmount --list /usr/bin/cryptmount -l /usr/bin/cryptmount --list cryptmount -l

NO.14 Which of the following are valid dmcrypt modes? (Choose THREE correct answers)
A. XTS
B. ESSIV
C. GMR
D. KWG
E. LRW
Answer: ABE

Lpi   117-303練習問題   117-303練習問題   117-303認定証

NO.15 What command will remove the dmcrypt mapping named cryptvol? (Provide the command with any
options and parameters)
Answer: /sbin/cryptsetup remove crypt-vol cryptsetup remove crypt-vol

NO.16 What is true about the permissions for the file afile given the following output from getfacl? (Select
TWO correct answers)
% getfacl afile
# file: afile
# owner: matt
# group: support
user::rwx
user:hugh:rw
group::r
group:staff:rx
mask::rwx
other::r
A. Anyone in the support group will be able to read and execute the file.
B. The user hugh will be able to read the contents of the file.
C. Anyone in the users group will be able to read the file.
D. The user matt will not be able to edit this file.
E. Anyone in the staff group will be able to read and execute the file.
Answer: BE

Lpi   117-303問題集   117-303認定証   117-303認定試験

NO.17 Which of the following are valid OpenVPN authentication modes? (Choose TWO correct answers)
A. S/Key
B. Kerberos
C. Static Key
D. Password
E. TLS
Answer: CE

Lpi認定試験   117-303   117-303認証試験   117-303   117-303問題集

NO.18 Linux Extended Attributes include attribute classes. Which of the following are included in the
defined attribute classes? (Select THREE correct answers)
A. default
B. system
C. owner
D. trusted
E. user
Answer: BDE

Lpi   117-303認定試験   117-303   117-303

NO.19 When adding additional users to a file's extended ACLs, what is true about the default behaviour of
the ACL mask for the file?
A. The mask is modified to be the union of all permissions of the file owner, owning group and all named
users and groups.
B. The mask is left unchanged.
C. If required, a warning is printed indicating that the mask is too restrictive for the permissions being
granted.
D. The mask is modified to be the union of all permissions of the owning group and all named users and
groups.
Answer: D

Lpi   117-303問題集   117-303参考書

NO.20 Which LUKS action, when supplied to the cryptsetup command, will initialize a LUKS partition and set
the initial key? (Provide only the action name)
Answer: luksFormat

Lpi   117-303認定試験   117-303

2013年8月15日星期四

Latest training guide for Lpi 117-101

IT-Tests.com provide you with a clear and excellent choice and reduce your troubles. Do you want early success? Do you want to quickly get Lpi certification 117-101 exam certificate? Hurry to add IT-Tests.com to your Shopping Cart. IT-Tests.com will give you a good guide to ensure you pass the exam. Using IT-Tests.com can quickly help you get the certificate you want.


IT-Tests.com not only have a high reliability, but also provide a good service. If you choose IT-Tests, but don't pass the exam, we will 100% refund full of your cost to you. IT-Tests.com also provide you with a free update service for one year.


The IT expert team use their knowledge and experience to make out the latest short-term effective training materials. This training materials is helpful to the candidates. It allows you to achieve the desired results in the short term. Especially those who study while working, you can save a lot of time easily. IT-Tests.com's training materials are the thing which you most wanted.


Exam Code: 117-101

Exam Name: Lpi (Lpi Level 1 Exam 101(with rpm))

Someone asked, where is success? Then I tell you, success is in IT-Tests.com. Select IT-Tests.com is to choose success. IT-Tests.com's Lpi 117-101 exam training materials can help all candidates to pass the IT certification exam. Through the use of a lot of candidates, IT-Tests.com's Lpi 117-101 exam training materials is get a great response aroud candidates, and to establish a good reputation. This is turn out that select IT-Tests.com's Lpi 117-101 exam training materials is to choose success.


IT-Tests.com is a website specifically provide the certification exam information sources for IT professionals. Through many reflects from people who have purchase IT-Tests's products, IT-Tests.com is proved to be the best website to provide the source of information about certification exam. The product of IT-Tests.com is a very reliable training tool for you. The answers of the exam exercises provided by IT-Tests.com is very accurate. Our IT-Tests's senior experts are continuing to enhance the quality of our training materials.


God is fair, and everyone is not perfect. As we all know, the competition in the IT industry is fierce. So everyone wants to get the IT certification to enhance their value. I think so, too. But it is too difficult for me. Fortunately, I found IT-Tests.com's Lpi 117-101 exam training materials on the Internet. With it, I would not need to worry about my exam. IT-Tests.com's Lpi 117-101 exam training materials are really good. It is wide coverage, and targeted. If you are also one of the members in the IT industry, quickly add the IT-Tests.com's Lpi 117-101 exam training materials to your shoppingcart please. Do not hesitate, do not hovering. IT-Tests.com's Lpi 117-101 exam training materials are the best companion with your success.


117-101 (Lpi Level 1 Exam 101(with rpm)) Free Demo Download: http://www.it-tests.com/117-101.html


NO.1 In bash, inserting 2>&1 after a command redirects
A. standard error to standard input.
B. standard input to standard error.
C. standard output to standard error.
D. standard error to standard output.
E. standard output to standard input.
Answer: D

Lpi   117-101   117-101 test answers   117-101   117-101 exam simulations

NO.2 To ensure that a running process continues to execute after you log out, the process should be started
with what command?
A. live
B. nohup
C. saferun
D. sh
Answer: B

Lpi   117-101 answers real questions   117-101

NO.3 Which directory contains additional information about installed packages?
A. /usr/share/documentation
B. /usr/local/share/documentation
C. /usr/local/doc
D. /usr/share/doc
E. /usr/packages/doc
Answer: D

Lpi exam prep   117-101 exam   117-101 test answers   117-101

NO.4 Which of the following commands will send output from the program myapp to both standard output
(stdout) and the file file1.log?
A. cat < myapp | cat > file1.log
B. myapp 0>&1 | cat > file1.log
C. myapp | cat > file1.log
D. myapp | tee file1.log
E. tee myapp file1.log
Answer: D

Lpi test   117-101   117-101 dumps   117-101 dumps   117-101 study guide

NO.5 To change the priority of a running process, you use the ____ command. (Specify command only
with no options.) Answer:
A. RENICE,/USR/BIN/RENICE
Answer: A

Lpi   117-101   117-101 certification   117-101 pdf

NO.6 What command line redirection characters instruct the shell to read from the current input source until a
specific word, on a separate line and without any trailing spaces, is reached?
A. <<
B. <|
C. !<
D. &<
Answer: A

Lpi braindump   117-101   117-101   117-101 study guide   117-101

NO.7 Which of the following commands will NOT update the Modify timestamp on the file /tmp/myfile.txt?
A. file /tmp/myfile.txt
B. echo "Hello" >/tmp/myfile.txt
C. sed -ie "s/1/2/" /tmp/myfile.txt
D. echo -n "Hello" >>/tmp/myfile.txt
E. touch /tmp/myfile.txt
Answer: A

Lpi   117-101   117-101

NO.8 You've downloaded an image file of a boot floppy disk to your hard drive. What is the best utility to
create a boot floppy from the disk image? (Specify a single command without options.) Answer:
A. DD,/BIN/DD
Answer: A

Lpi certification training   117-101   117-101 demo   117-101 exam dumps

NO.9 Which of the following is a limitation of the cut command?
A. The cut command can only select output by field position.
B. The cut command cannot reorder fields.
C. The cut command only works on ASCII text.
D. The cut command will always print one line of output for every line of input.
Answer: B

Lpi certification training   117-101   117-101 pdf   117-101 certification training

NO.10 Once a shell variable has been created, how can the variable be removed from the environment?
A. VAR=
B. set -d VAR
C. set -u VAR
D. unset VAR
Answer: D

Lpi practice test   117-101 exam   117-101   117-101 study guide

NO.11 Which signal is sent by the kill command by default?
A. HUP(1)
B. QUIT(3)
C. KILL(9)
D. TERM(15)
Answer: D

Lpi test answers   117-101 test answers   117-101 certification

NO.12 Which command will convert all tab characters in a file to spaces and print that to standard out?
A. convert
B. expand
C. retab
D. untab
Answer: B

Lpi exam   117-101   117-101 exam simulations   117-101   117-101 exam prep   117-101

NO.13 Which of the following commands will NOT execute the bash script /usr/local/bin/runme.sh?
A. source /usr/local/bin/runme.sh
B.. /usr/local/bin/runme.sh
C. /bin/bash /usr/local/bin/runme.sh
D. /usr/local/bin/runme.sh
E. run /usr/local/bin/runme.sh
Answer: E

Lpi   117-101   117-101 pdf

NO.14 Which command will show you the contents of a gzip compressed tar archive?
A. gzip archive.tgz | tar xvf -
B. tar ztf archive.tgz
C. gzip -d archive.tgz | tar tvf -
D. tar cf archive.tgz
Answer: B

Lpi   117-101 dumps   117-101 braindump

NO.15 What is the purpose of the Bash built-in export command?
A. To allow disks to be mounted remotely.
B. To automate the export of variables for subsequently executed commands.
C. To make the command history available to sub-shells.
D. To run a command as a process in a sub-shell.
E. To save variable settings for future shell invocations.
Answer: B

Lpi   117-101 test questions   117-101 exam simulations

NO.16 The priority of any process can range from -20 to ________. (Provide only the numerical value) Answer:
A. 19,+19
Answer: A

Lpi   117-101 exam simulations   117-101 braindump   117-101 test answers

NO.17 When in Normal mode in vi, which command character will insert a blank line below the current cursor
position and place the insert cursor at the beginning of the new line?
A. a
B. i
C. n
D. o
Answer: D

Lpi   117-101   117-101 original questions   117-101 exam prep

NO.18 In order to use the output of ls to overwrite a file called bazz, which of the following command lines
would you use?
A. ls > bazz
B. ls >& bazz
C. ls &> bazz
D. ls >> bazz
Answer: A

Lpi test questions   117-101   117-101   117-101   117-101

NO.19 Which of the following sed commands will replace all instances of the string foo with the string foobar
changing the file file1.txt in place.?
A. sed 's/foo/foobar/g' file1.txt
B. sed 's/foo/foobar/g' file1.txt > file1.txt
C. sed 's/foo/foobar/g' file1.txt | file1.txt
D. sed -i 's/foo/foobar/g' file1.txt
E. sed -i 's/foo/foobar/g' file1.txt > file1.txt
Answer: D

Lpi test   117-101 pdf   117-101 dumps   117-101

NO.20 When in Normal mode in vi, which command character can be used to begin a reverse search of the
text?
A. ?
B. /
C. F
D. r
Answer: A

Lpi   117-101 answers real questions   117-101   117-101 answers real questions   117-101 braindump

117-101 exam is a Lpi certification exam and IT professionals who have passed some Lpi certification exams are popular in IT industry. So more and more people participate in 117-101 certification exam, but 117-101 certification exam is not very simple. If you do not have participated in a professional specialized training course, you need to spend a lot of time and effort to prepare for the exam. But now IT-Tests.com can help you save a lot of your precious time and energy.