显示标签为“MYSQL”的博文。显示所有博文
显示标签为“MYSQL”的博文。显示所有博文

2014年4月22日星期二

MYSQLの005-002の試験問題集が登場します

JPexamのMYSQLの005-002試験問題集を購入したら、あなたは人生の最も重要な試験準備のことを実現できます。あなたは最高のトレーニング資料を手に入れました。JPexamの製品を買ったら、あなた自身のために成功への扉を開きました。あなたは最も小さな努力で最大の成功を取ることができます。

MYSQLの005-002認定試験は現在で本当に人気がある試験ですね。まだこの試験の認定資格を取っていないあなたも試験を受ける予定があるのでしょうか。確かに、これは困難な試験です。しかし、難しいといっても、高い点数を取って楽に試験に合格できないというわけではないです。では、まだ試験に合格するショートカットがわからないあなたは、受験のテクニックを知りたいですか。今教えてあげますよ。JPexamの005-002問題集を利用することです。

005-002試験はMYSQLのひとつの認証試験でIT業界でとても歓迎があって、ますます多くの人が005-002認証試験に申し込んですがその認証試験が簡単に合格できません。準備することが時間と労力がかかります。でも、JPexamは君の多くの貴重な時間とエネルギーを節約することを助けることができます。

あなたの目標はとても高いですから、あなたに色々なヘルプをあげられる資料が必要です。JPexam MYSQLの005-002試験問題集はあなたが自分の目標を達成することを助けられます。JPexam MYSQLの005-002問題資料は高度に認証されたIT領域の専門家の経験と創造を含めているものです。当社の製品は、すべての可能性のある問題を試させられます。受験生の皆様に問題の100パーセント真実な解答を提供することを保証します。

難しいIT認証試験に受かることを選んだら、頑張って準備すべきです。JPexamのMYSQLの005-002試験トレーニング資料はIT認証試験に受かる最高の資料で、手に入れたら成功への鍵を持つようになります。JPexamのMYSQLの005-002試験トレーニング資料は信頼できるもので、100パーセントの合格率を保証します。

試験番号:005-002問題集
試験科目:Certified MySQL 5.0 DBA Part I
最近更新時間:2014-04-22
問題と解答:全140問
100%の返金保証。1年間の無料アップデート。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/005-002_exam.html

NO.1 Which of the following are requirements for MyISAM binary portability?
A. Both machines must use the same operating system.
B. Database and table names must use lowercase format.
C. Both machines must use IEEE floating-point format or contain no floating-point columns.
D. Both machines must use two's-complement integer arithmetic.
Answer: CD

MYSQL   005-002   005-002   005-002   005-002認定試験

NO.2 Which of the following correctly defines dirty reads, non-repeatable reads and phantom row?
A. A dirty read is a read by one transaction of uncommitted changes made by another transaction.
B. A dirty read is a read by one transaction of its uncommitted changes.
C. A non-repeatable read occurs when a transaction performs the same retreival twice but gets a different
result each time.
D. A non-repeatable read is a row that appears where it was not visible before.
E. A phantom is a row that appears where it was not visible before.
F. A phantom is a read by one transaction of uncommitted changes made by another transaction.
Answer: ACE

MYSQL認定試験   005-002過去問   005-002

NO.3 Which of the following are some general capabilites of the mysql client program?
A. Create and Drop databases
B. Ping the server
C. Create, Drop, and modify tables and indexes.
D. Shutdown the server.
E. Create users.
F. Display replication server status.
Answer: ACEF

MYSQL   005-002認定資格   005-002認定試験   005-002

NO.4 Which of the following best describes the scope of explicitly and implicitly set locks?
A. Explicitly set locks may span several commands.
B. Implicitly set locks may span several commands.
C. Implicitly set locks will span only one statement or transaction.
D. Explicitly set locks will span only one statement or transaction.
Answer: ABC

MYSQL問題集   005-002   005-002参考書   005-002参考書

NO.5 Which of the following actions are performed during an RPM installation of the MySQL server
package?
A. Setup a mysql user
B. Setup a mysql group
C. Initialize the data directory
D. Setup passwords for all default accounts.
Answer: ABC

MYSQL認証試験   005-002認定資格   005-002   005-002認定証

NO.6 Which of the following statements are true?
A. InnoDB supports Foreign Keys.
B. MyISAM supports Foreign Keys.
C. InnoDB supports cascaded DELETE statements.
D. MyISAM supports cascaded DELETE statements.
E. InnoDB supports cascaded UPDATE statements.
F. MyISAM supports cascaded UPDATE statements.
Answer: ACE

MYSQL   005-002認定証   005-002   005-002練習問題   005-002

NO.7 Another user has issued the statement LOCK TABLE pets FOR WRITE
You can...
A. Update table pets
B. SELECT from table pets
C. Update and SELECT from table pets
D. None of the above
Answer: D

MYSQL認証試験   005-002練習問題   005-002   005-002

NO.8 Which of the following are some benefits of using MySQL built binaries over binaries built by yourself?
A. They are highly optimized.
B. They are cross-platform.
C. Many are built using commercial compilers that produce a better quality build than with freely available
compilers.
D. They will work with tools such as MySQL Administrator and MySQL Query Browser.
E. They may include libraries not available in the standard operating system library.
Answer: ACE

MYSQL認定資格   005-002認定証   005-002問題集   005-002   005-002問題集   005-002

NO.9 Consider the following query:
DELETE FROM INFORMATION_SCHEMA.TABLES
WHERE table_schema = 'world'
AND table_name = 'Country'
What would be the result of executing this query?
A. An error would be issued
B. A warning would be issued
C. The row would be deleted from the INFORMATION_SCHEMA.TABLES table, and the table Country
would be dropped from the world database
D. The row would be deleted from the INFORMATION_SCHEMA, but the table Country in the world
database would be unaffected.
Answer: A

MYSQL   005-002   005-002   005-002   005-002認定証

NO.10 MySQL is a multi-threaded database server. Every connection to the database server is handled by
it's own thread.
A. True
B. False
Answer: A

MYSQL   005-002   005-002   005-002   005-002認証試験

NO.11 Which of the following are true for how BTREE and HASH index types should be used for MEMORY
tables?
A. HASH index types are only for use with equality comparisions such as those using the = and <=>
operators.
B. BTREE index types are preferable for use with comparisons that do not just use equality operators
such as = and <=>
C. BTREE index types are only for use with equality comparisons such as those using the = and <=>
operators.
D. HASH index types are preferable for use with comparisons that do not just use equality operators such
as = and <=>
Answer: AB

MYSQL問題集   005-002認定試験   005-002参考書   005-002   005-002

NO.12 What are some advantages of using the SHOW command rather than using the
INFORMATION_SCHEMA?
A. It is available for releases older than MySQL 5.0.
B. It returns results quicker than using the INFORMATION_SCHEMA.
C. Using SHOW can provide more concise information.
D. SHOW is a feature of standard SQL, and INFORMATION_SCHEMA is a MySQL specific command.
Answer: AC

MYSQL   005-002   005-002   005-002   005-002

NO.13 Index analysis and optimization using ANALYZE and OPTIMIZE statements should...
A. generally never be run manually
B. be run once the table reaches 100,000 rows or above
C. be run when more than 5% of the rows are changed by a single statement
D. be run when EXPLAIN SELECT shows that an inordinate amount of rows is expected to be read during
query execution
E. be run when you suspect that a table is heavily fragmented
Answer: DE

MYSQL認定試験   005-002   005-002   005-002参考書   005-002問題集   005-002

NO.14 Which of the following steps should be taken to restore an InnoDB table to a consistent state without
having to shutdown the server?
A. Run the REPAIR TABLE command.
B. Dump the table with mysqldump, drop the table then re-create from the dump file.
C. Run the CHECK TABLE command.
D. Dump the table with mysqlhotcopy, drop the table then re-create with the backup file.
Answer: B

MYSQL   005-002   005-002   005-002認定証   005-002   005-002問題集

NO.15 Which of the following best describes why table locking is often not desirable compared to page or row
locking?
A. Table locks can have deadlocks.
B. Table locks create concurrency issues.
C. Table locks prevent other clients from making any changes to the table until released.
D. Table locks can cause data corruption issues if more than one client tries to make changes while
locked.
Answer: BC

MYSQL認定資格   005-002練習問題   005-002過去問   005-002   005-002

NO.16 The ANALYZE TABLE command should be used...
A. When you need to find out why a query is taking a long time to execute.
B. To improve performance by updating index distribution statistics.
C. After large amounts of table data have changed.
D. To check a tables structure to see if it may have been damaged and needs repair.
Answer: BC

MYSQL過去問   005-002練習問題   005-002問題集   005-002   005-002認定試験

NO.17 In a standard MySQL installation which of following files are stored below the data directory?
A. Format files for all the tables
B. Data and index files for MyISAM tables
C. InnoDB tablespace files
D. General server logs
E. MySQL upgrade script files
Answer: ABCD

MYSQL   005-002認定試験   005-002   005-002

NO.18 Suppose you have a server that has been started with the --myisam-recover option. When does the
server perform the check on the MyISAM tables?
A. Each time the server is started.
B. Each time it encounters an error.
C. Each time it opens the MyISAM table files.
D. Each time the CHECK TABLE command is issued.
Answer: C

MYSQL   005-002   005-002過去問   005-002練習問題

NO.19 Suppose you have a column in which most records are going to be between 30 and 32 characters.
Which of the following column types would be most efficient?
A. VARCHAR
B. CHAR
C. TEXT
D. Either VARCHAR or CHAR
Answer: B

MYSQL参考書   005-002   005-002   005-002

NO.20 Which of the following statements are true regarding the InnoDB storage engine?
A. It uses multiversioning to isolate transactions.
B. It is not possible for deadlocks to occur.
C. It does not isolate transactions.
D. It is possible for deadlocks to occur.
Answer: AD

MYSQL   005-002   005-002   005-002参考書

NO.21 Which of the following are true regarding the table cache?
A. It is used to cache row data in open tables
B. It holds file descriptors for open tables
C. The size of the table cache may be set per-session
D. Each connection has its own table cache. They are of equal size, set globally.
E. There is one table cache, shared among all sessions.
F. Increasing the size of the variable table_cache allows mysqld to keep more tables open simultaneously
Answer: BEF

MYSQL   005-002   005-002   005-002過去問   005-002練習問題

NO.22 Which of the following APIs/connectors are included in a MySQL distribution?
A. Connector/J
B. Connector/ODBC
C. C API
D. Connector/NET
E. Connector/MJX
Answer: C

MYSQL認証試験   005-002過去問   005-002

NO.23 Which of the following statements are true regarding table locks?
A. They can only be released by the client holding them.
B. They can be released by other connections than the client holding them.
C. They are implicitly released when the connection is closed.
D. They are not released when the connection is closed
Answer: AC

MYSQL認証試験   005-002認定試験   005-002   005-002   005-002過去問

NO.24 mysqldump can be instructed to include commands to drop and recreate tables before trying to create
or load data.
A. True
B. False
Answer: A

MYSQL認定証   005-002参考書   005-002   005-002   005-002

NO.25 What are some properties of using LOCK TABLE?
A. Less work is required by the server to acquire and release locks.
B. It can only be used with the MyISAM storage engine.
C. Using LOCK TABLE sometimes decreases the amount disk reads and writes needed for a group of
statements.
D. All tables must be locked in a single statement.
E. It creates more disk activity.
Answer: ACD

MYSQL   005-002   005-002問題集   005-002問題集   005-002   005-002

NO.26 Which of the following statements is true for mysqldump?
A. It can dump data only on remote servers.
B. It can dump data only on the local server.
C. It can dump data on both local and remote servers.
Answer: C

MYSQL認定資格   005-002   005-002認定試験   005-002認定証   005-002認定試験   005-002問題集

NO.27 Which of the following are some general properties of the mysqlimport client program?
A. It loads data files into tables.
B. It can load files only on the server host.
C. It provides a command-line interface to the LOAD DATA INFILE.
D. It can load files both on the client and server host.
E. It bypasses the server and writes directly to the corresponding data files.
Answer: ACD

MYSQL認定資格   005-002認定証   005-002認定証

NO.28 Which mysqld command line option disables incoming TCP/IP connections?
A. --shared-memory
B. --memlock
C. --no-networking
D. --skip-networking
Answer: D

MYSQL   005-002   005-002

NO.29 Assume you compile MySQL from source and invoke configure with the following options.
--with-charset=latin1 --with-extra-charsets=utf8,ucs2
Compared to a standard binary installation that contains many more character sets, which of the following
statements is/are true?
A. The compiled version will use less disk space, because only a few character sets will be installed on
disk.
B. The compiled version will use less memory, because only a few character sets will be loaded by the
server.
C. The compiled version will use less file handles, because only a few files need to be opened when the
server is started.
Answer: AB

MYSQL認定資格   005-002   005-002   005-002認定試験

NO.30 Will the following SELECT query list all of the tables in the INFORMATION_SCHEMA database? If not,
why?
SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_SCHEMA = 'INFORMATION_SCHEMA'
ORDER BY TABLE_NAME
A. Yes.
B. No; the INFORMATION_SCHEMA database does not contain information on itself.
C. No; the WHERE clause is incorrect. The correct field name is TABLE_SCHEMATA.
D. No; there is no table in the INFORMATION_SCHEMA database called TABLES.
Answer: A

MYSQL   005-002認定試験   005-002   005-002   005-002

JPexamは最新のC_HANAIMP_1問題集と高品質のJN0-690問題と回答を提供します。JPexamの70-687 VCEテストエンジンとHP3-C33試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のVCAP5-DCD PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/005-002_exam.html

MYSQLの006-002認証の最優秀問題集

最近のわずかの数年間で、MYSQLの006-002認定試験は日常生活でますます大きな影響をもたらすようになりました。将来の重要な問題はどうやって一回で効果的にMYSQLの006-002認定試験に合格するかのことになります。この質問を解決したいのなら、JPexamのMYSQLの006-002試験トレーニング資料を利用すればいいです。この資料を手に入れたら、一回で試験に合格することができるようになりますから、あなたはまだ何を持っているのですか。速くJPexamのMYSQLの006-002試験トレーニング資料を買いに行きましょう。

006-002認定試験はIT業界の新たなターニングポイントの一つです。試験に受かったら、あなたはIT業界のエリートになることができます。情報技術の進歩と普及につれて、MYSQLの006-002問題集と解答を提供するオンライン·リソースが何百現れています。その中で、JPexamが他のサイトをずっと先んじてとても人気があるのは、JPexamのMYSQLの006-002試験トレーニング資料が本当に人々に恩恵をもたらすことができて、速く自分の夢を実現することにヘルプを差し上げられますから。

IT業界の中でたくさんの野心的な専門家がいって、IT業界の中でより一層頂上まで一歩更に近く立ちたくてMYSQLの006-002試験に参加して認可を得たくて、MYSQL の006-002試験が難度の高いので合格率も比較的低いです。MYSQLの006-002試験を申し込むのは賢明な選択で今のは競争の激しいIT業界では、絶えず自分を高めるべきです。しかし多くの選択肢があるので君はきっと悩んでいましょう。

今の競争の激しいIT業界ではMYSQLの006-002試験にパスした方はメリットがおおくなります。給料もほかの人と比べて高くて仕事の内容も豊富です。でも、この試験はそれほど簡単ではありません。

試験番号:006-002問題集
試験科目:Certified MySQL 5.0 DBA Part II
最近更新時間:2014-04-22
問題と解答:全140問
100%の返金保証。1年間の無料アップデート。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/006-002_exam.html

NO.1 The user 'joe' connecting from the host example.com has full access to all databases on the server:
mysql> SHOW GRANTS FOR 'joe'@'example.com';
+----------------------------------------------------+
| Grants for joe@example.com |
+----------------------------------------------------+
| GRANT ALL PRIVILEGES ON *.* TO 'joe'@'example.com' |
+----------------------------------------------------+
1 row in set (0.00 sec)
You need to restrict the user from accessing the mysql database. Will the following statement do this?
REVOKE ALL PRIVILEGES ON mysql.* FROM 'joe'@'example.com'
A. Yes
B. No
C. The answer cannot be determined from the information provided.
Answer: B

MYSQL   006-002   006-002

NO.2 Which of the following best describes what the master.info file contains and how it is used?
A. It contains the values from the CHANGE MASTER statement.
B. When the slave restarts it looks for which master to use from this file.
C. It contains information about the master server, its slaves and its configuration.
D. It is used by an administrator to determine what slaves connect to the master, and other information
about the master server.
Answer: AB

MYSQL参考書   006-002参考書   006-002過去問   006-002認定試験   006-002

NO.3 Which of the following statements are true of compressed tables?
A. They can be uncompressed.
B. They can not be uncompressed.
C. They can be uncompressed but some data corruption may occur.
Answer: A

MYSQL   006-002認定証   006-002認証試験

NO.4 Which of the following would be considered a good candidate table for compression?
A. A table with data that needs only few updates in the future.
B. A table with data that will not be updated in the future.
C. A large table, such as those used for data warehousing.
D. All MyISAM tables are good candidates for compression.
Answer: B

MYSQL   006-002   006-002   006-002問題集

NO.5 Does max_connections have an affect on the number of slaves that may connect to a master?
A. No, because slaves are not really clients.
B. Yes, because each slave is effectively a connected user.
C. No, because slaves do not use the same type of connection as a regular client.
D. Yes, because if the server has too many connections, it may slow the slaves down.
Answer: B

MYSQL問題集   006-002   006-002認定証   006-002参考書   006-002

NO.6 For which of the following objects can privileges be specified?
A. Host
B. Global
C. Database
D. Table
E. Column
F. Row
Answer: BCDE

MYSQL練習問題   006-002   006-002参考書   006-002認定資格   006-002参考書

NO.7 In the following query, the Population column is indexed:
mysql> EXPLAIN SELECT Name
-> FROM Country
-> WHERE Code LIKE '%B%' AND Population > 10000
*************************** 1. row ***************************
id: 1
select_type: SIMPLE
table: Country
type: ALL
possible_keys: i_pop
key: NULL
key_len: NULL
ref: NULL
rows: 239
Extra: Using where
Which of the following best describes how to deal with the key value of the EXPLAIN output?
A. Use FORCE KEY
B. Use USE INDEX.
C. Use FORCE INDEX.
D. Use USE POSSIBLE_KEY
Answer: BC

MYSQL   006-002練習問題   006-002   006-002   006-002

NO.8 Consider the following:
mysql> EXPLAIN SELECT Name FROM Country WHERE Code = 'CAN'
*************************** 1. row ***************************
id: 1
select_type: SIMPLE
table: Country
type: const
possible_keys: PRIMARY
key: PRIMARY
key_len: 3
ref: const
rows: 1
Extra:
Which of the following best describes the meaning of the value of the type column?
A. The table has exactly one row.
B. Several rows may be read from the table.
C. Only one row of all its rows need to be read.
Answer: C

MYSQL認定資格   006-002認定試験   006-002練習問題   006-002   006-002

NO.9 Which of the following are important network factors for remote MySQL clients?
A. Latency.
B. Firewalls.
C. Throughput speed.
D. The type of routers used.
Answer: AC

MYSQL   006-002   006-002   006-002過去問

NO.10 Which of the following best describe the effects on performance for the dynamic-row format for
MyISAM has?
A. Retrievals are more complex and slower.
B. Retrievals are less complex and are faster.
C. Rows generally take up less disk space than fixed-row format.
D. Rows generally take up more disk space than fixed-row format.
Answer: AC

MYSQL   006-002   006-002参考書   006-002   006-002   006-002認証試験

NO.11 The stored function year_to_date is created by the 'root'@'localhost' account as follows:
CREATE FUNCTION year_to_date ()
RETURNS DECIMAL(10,2)
SQL SECURITY DEFINER
BEGIN
...
END;
Within the routine body, a number of calculations are made on data in the financials table and the
calculated value is returned. The only account which can access the financials table is 'root'@'localhost'.
If a client connects with the account 'joe'@'localhost' and calls the year_to_date function, what will
happen?
A. The function will not execute, as 'joe'@'localhost' does not have access to the financials table
B. The function will not execute as SQL SECURITY DEFINER has been specified. It would execute if
instead SQL SECURITY INVOKER had been specified
C. The function will always execute as if it was 'root'@'localhost' that invoked it since SQL SECURITY
DEFINER has been specified.
D. If the account 'joe'@'localhost' has the EXECUTE privilege on year_to_date, the function will complete
successfully
Answer: D

MYSQL   006-002   006-002問題集   006-002   006-002   006-002

NO.12 What kind of replication is supported by the MySQL server?
A. Multiple-master replication
B. Master to slave replication
C. Single file based clustering
D. MySQL doesn't support replication
Answer: B

MYSQL   006-002   006-002   006-002過去問

NO.13 Which of the following is/are valid reasons to consider using --skip-networking?
A. Your server is not networked to other servers.
B. You do not have a need for remote clients to connect.
C. You have a need for remote clients to connect.
D. You are not going to use replication or clustering.
Answer: B

MYSQL   006-002   006-002過去問

NO.14 Consider the following EXPLAIN output.
mysql> EXPLAIN SELECT Name FROM City WHERE Population > 8000000
*************************** 1. row ***************************
id: 1
select_type: SIMPLE
table: City
type: ALL
possible_keys: NULL
key: NULL
key_len: NULL
ref: NULL
rows: 4079
Extra: Using where
Which of the following statements are true?
A. The query cannot be optimized any better.
B. No index could be used to perform the query.
C. All 4079 rows of the table need to examined.
D. The Name column should be indexed.
E. The Population column should be indexed.
Answer: BCE

MYSQL認定証   006-002認定資格   006-002   006-002

NO.15 When working with replication, why might you want to stop the SQL thread on the slave while keeping
the I/O thread running?
A. So that no changes are made while making backups.
B. So that events for the slave do not get backlogged on the master.
C. So that remaining events can be processed while not receiving new events from the master.
Answer: AB

MYSQL   006-002   006-002認定資格

NO.16 Which of the following best describes why InnoDB tables should always have primary keys and why
they should be short?
A. Because InnoDB uses primary keys to locate tables, and shorter keys make quicker lookups.
B. Because InnoDB uses primary keys to locate table rows, and shorter keys make quicker lookups.
C. Because InnoDB stores pointers in a log to all the primary keys and shorter keys make this log smaller.
Answer: B

MYSQL過去問   006-002   006-002認定試験   006-002問題集

NO.17 Which of the following optimizations could be made based on data collected in the slow query log?
A. Tune server parameters.
B. Change the storage engines in use.
C. Make changes to the network infrastructure.
D. Rewrite queries to perform more efficiently.
E. Normalize data or add indexes to the tables that the queries use.
Answer: ABDE

MYSQL過去問   006-002認証試験   006-002   006-002

NO.18 The type of file system you chose may affect MySQL use and/or performance with regard to...
A. Table opening time.
B. Size limits of files.
C. Time to recover from a crash.
D. The number of users MySQL can handle.
E. The type of storage engines that can be used.
Answer: ABC

MYSQL認証試験   006-002問題集   006-002   006-002練習問題

NO.19 Which of the following statements are true regarding wildcards in the host name of an account
specification?
A. The '%' character is used to match any number of characters or numbers
B. The '*' character is used to match any number of characters or numbers
C. The '_' character is used to match any number of characters or numbers
D. The '.' character is used to match any single character or number
E. Wildcards may be used to match any number of characters at the beginning of the host name or IP
address only
F. Wildcards may be used to match any number of characters at the end of the host name or IP address
only
G. Wildcards may be used to match any number of characters anywhere in the host name or IP address
Answer: AG

MYSQL練習問題   006-002参考書   006-002   006-002

NO.20 Which of the following best describes what MASTER_LOG_FILE and MASTER_LOG_POS provides?
A. The path of the log file.
B. The file to log replication actions to.
C. The masters binary log name used for replication.
D. The position in the masters binary log in which to start replication.
Answer: CD

MYSQL   006-002認定試験   006-002   006-002問題集

NO.21 Is it possible to tell the MySQL server to throw an error on division-by-zero rather than converting it to
NULL and a warning?
A. No, it has to be done programmatically.
B. Yes, by updating a system variable.
C. Yes, there is a SQL mode that exists for that.
D. No, division-by-zero is always converted regardless of any setting.
Answer: C

MYSQL問題集   006-002   006-002認定試験   006-002   006-002認定試験

NO.22 In regards to security, which of the following statements are true?
A. mysqld should not be run as root or administrator.
B. mysqld should be run as root or administrator.
C. The user owning the server process should own all files and directories to which the server may write.
D. The root or admininistrator users should own all files related to the server process
Answer: AC

MYSQL   006-002参考書   006-002   006-002認定証

NO.23 Assuming that the user account 'joe'@'example.com' exists, executing DROP USER
'joe'@'example.com' has the following consequences:
A. The user account will immediately be removed from the server, if no object-level privileges are in effect
for that account
B. The account will be removed from the server the next time FLUSH PRIVILEGES is executed, if no
object-level privileges are in effect for that account
C. The account and all associated privileges will immediately be removed from the server
D. The user account and all associated privileges will be removed from the server the next time FLUSH
PRIVILEGES is executed.
Answer: C

MYSQL認定資格   006-002認定証   006-002認証試験   006-002認定証

NO.24 Can multi-column FULLTEXT indexes be used? If so, when?
A. No, they can not be used.
B. Yes, they should be used to search multiple columns simultaneously.
C. Yes, they can be used to search either one or all of the indexed columns.
Answer: B

MYSQL過去問   006-002認定証   006-002認定証   006-002

NO.25 Which of the following statements are true regarding the structure of grant tables in new distributions?
A. They change with every upgrade.
B. They are often changed.
C. They remain the same for backwards compatibility.
Answer: B

MYSQL認定証   006-002   006-002認証試験   006-002練習問題

NO.26 What type of resource limitations may be placed on a user account with the GRANT statement?
A. The number of times per hour that an account is allowed to connect to the server
B. The number of queries per hour an account is allowed to issue
C. The number of updates per hour an account is allowed to issue
D. The maximum number of simultaneous connections an account can have
E. Resource limits can only be specified globally, not per-account
F. MySQL does not have provisions for limiting resource usage
Answer: ABCD

MYSQL   006-002   006-002参考書   006-002   006-002認定証   006-002認定資格

NO.27 What are reasons to prefer using GRANT and REVOKE statements over editing the privilege tables
directly?
A. Using GRANT and REVOKE allows the server to figure out the right tables and do all the appropriate
work
B. All grant tables in memory are immediately updated on GRANT and REVOKE
C. Making changes directly to the grant tables, one must remember to execute flush privileges to make
the changes take effect
D. GRANT and REVOKE statements allow you to do more fine-grained tuning of user privileges than
does editing the grant tables directly.
E. None of the above
Answer: ABC

MYSQL問題集   006-002認証試験   006-002認定試験   006-002過去問   006-002

NO.28 How can stored routines be used to check for constraints or legality of incoming data?
A. They can make use of the VALIDATE DEFINER setting.
B. They can not be used to check for constraints or legality of data.
C. They can check and only perform an action if the incoming values match a specified value.
Answer: C

MYSQL   006-002認定資格   006-002認証試験

NO.29 When performing diagnostic functions on a server should excessive start and stop messages be looked
for in the error log, and why?
A. No, start and stop messages are of no relevance to diagnostics.
B. Yes, because there is a bug in mysqld that can cause multiple start and stop messages to be inserted
in the log.
C. No, because they will not provide any information as to what is wrong.
D. Yes, because they can indicate that there is something causing the server to restart unexpectedly and
not due to normal startup and shutdown.
Answer: D

MYSQL   006-002過去問   006-002練習問題   006-002

NO.30 Which of the following statements best describe the key buffer?
A. It is a global buffer.
B. It is set on a per-connection basis.
C. It caches index blocks for MyISAM tables only.
D. It caches index blocks for InnoDB tables only.
E. It caches index blocks for all storage engine tables.
Answer: AC

MYSQL   006-002過去問   006-002   006-002

JPexamは最新のC_A1FIN_10問題集と高品質のC4060-155問題と回答を提供します。JPexamのNS0-155 VCEテストエンジンとC4120-783試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のJN0-102 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/006-002_exam.html

JPexamの問題集でMYSQL 1Z0-870試験の認定資格を取ろう

JPexamはきみのIT夢に向かって力になりますよ。MYSQLの1Z0-870の認証そんなに人気があって、JPexamも君の試験に合格するために全力で助けてあげて、またあなたを一年の無料なサービスの更新を提供します。明日の成功のためにJPexamを選らばましょう。

JPexamは高品質の製品を提供するだけではなく、完全なアフターサービスも提供します。当社の製品を利用したら、一年間の無料更新サービスを提供します。しかも、速いスピードで受験生の皆様に提供して差し上げます。あなたがいつでも最新の試験資料を持っていることを保証します。

JPexamは初めて試験を受けるあなたが一回で試験に合格して、認証資格を取ることを保証します。JPexamが提供して差し上げたのは高品質のMYSQLの1Z0-870模擬問題集で、あなたがステップバイステップで試験に準備する手順を指導しています。JPexamのMYSQLの1Z0-870試験問題集は絶対あなたに成功をもたらすことを保証します。JPexamのMYSQLの1Z0-870認定試験に準備するために色々な方法がありますが、

JPexamの1Z0-870問題集は多くの受験生に検証されたものですから、高い成功率を保証できます。もしこの問題集を利用してからやはり試験に不合格になってしまえば、JPexamは全額で返金することができます。あるいは、無料で試験1Z0-870問題集を更新してあげるのを選択することもできます。こんな保障がありますから、心配する必要は全然ないですよ。

試験番号:1Z0-870問題集
試験科目:MySQL 5.0, 5.1 and 5.5 Certified Associate Exam
最近更新時間:2014-04-22
問題と解答:全240問
100%の返金保証。1年間の無料アップデート。

JPexam提供した商品の品質はとても良くて、しかも更新のスピードももっともはやくて、もし君はMYSQLの1Z0-870の認証試験に関する学習資料をしっかり勉強して、成功することも簡単になります。

MYSQLの1Z0-870は専門知識と情報技術の検査として認証試験で、JPexamはあなたに一日早くMYSQLの認証試験に合格させて、多くの人が大量の時間とエネルギーを費やしても無駄になりました。JPexamにその問題が心配でなく、わずか20時間と少ないお金をを使って楽に試験に合格することができます。JPexamは君に対して特別の訓練を提供しています。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/1Z0-870_exam.html

NO.1 You work as a Database Administrator for Pass4sure.com. The company uses MySQL as its database.
You have created a table named Employees in the database. You want to create a list of
employees working in the organization, but you do not want to display any duplicate row in the report.
Which of the following statements will help you to accomplish the task?
A. SELECT emp_id, emp_name FROM Employees ORDER BY emp_id;
B. SELECT emp_id, emp_name FROM Employees;
C. SELECT DISTINCT emp_id, emp_name FROM Employees;
D. SELECT emp_id, emp_name FROM Employees GROUP BY emp_id;
Answer: C

MYSQL   1Z0-870問題集   1Z0-870問題集   1Z0-870練習問題   1Z0-870

NO.2 DRAG DROP
Drag and drop the correct constraint types to their corresponding specifications.
Answer:

NO.3 Which of the following will be true about a table column if you plan to create an index on that column?
Each correct answer represents a complete solution. Choose all that apply.
A. The column is often used in the WHERE clause of SQL statements.
B. The column contains very small number of NULL values.
C. The table is updated frequently.
D. The column should contain a wide range of values.
Answer: A,D

MYSQL認定試験   1Z0-870練習問題   1Z0-870

NO.4 Adam works as a Database Administrator for Pass4sure.com. The company uses MySQL as its
database. Adam has created a table named Employees in the database. He wants to retrieve the
information of those employees who have at least one person reporting to them. Which of the following
queries will Adam execute to accomplish the task?
A. SELECT employee_id, last_name, job_id, department_id FROM Employees WHERE
employee_id EXISTS (SELECT manager_id WHERE manager_id is NULL);
B. SELECT employee_id, last_name, job_id, department_id FROM Employees HAVING
employee_id IN (SELECT manager_id FROM Employees WHERE manager_id is NOT NULL);
C. SELECT employee_id, last_name, job_id, department_id FROM Employees outer WHERE EXISTS
(SELECT 'x' FROM Employees WHERE manager_id = outer.employee_id);
D. SELECT employee_id, last_name, job_id, department_id FROM Employees WHERE
employee_id IN (SELECT manager_id WHERE manager_id is NOT NULL);
Answer: C

MYSQL   1Z0-870練習問題   1Z0-870過去問   1Z0-870   1Z0-870

NO.5 You work as a Database Administrator for Pass4sure.com. The company uses MySQL as its database.
You have created two tables named Employees and Departments in the database. Now, you want to
display data from both tables. Which of the following actions will you perform to accomplish the task.?
A. Join
B. Table Merge operator
C. HAVING
D. GROUP BY
Answer: A

MYSQL認定証   1Z0-870   1Z0-870過去問   1Z0-870   1Z0-870認定証

NO.6 Which of the following terms is described in the statement below?
"It is procedural code that is automatically executed in response to certain events on a particular table or
view in a database."
A. Data type
B. Table
C. Datetime data type
D. Database trigger
Answer: D

MYSQL認定証   1Z0-870練習問題   1Z0-870認定試験   1Z0-870認定証   1Z0-870問題集

NO.7 Which of the following statements is correct for equijoin used to join two tables named Employees and
Department?
A. SELECT Dept_Name, Emp_Name
FROM Departments d1, Employees e1
ORDER BY Dept_Name, Emp_Name;
B. SELECT D.Dept_Name, E.Emp_Name
FROM Departments d1, Employees e1
HAVING Dept_Name, Emp_Name;
C. SELECT E.Emp_Name, D.Dept_Name
FROM Departments d1, Employees e1
WHERE Dept_No = Dept_No
ORDER BY Dept_Name, Emp_Name;
D. SELECT Dept_Name, Emp_Name
FROM Departments d1, Employees e1
WHERE d1.Dept_No = e1.Dept_No
ORDER BY Dept_Name, Emp_Name;
Answer: D

MYSQL認定証   1Z0-870   1Z0-870過去問

NO.8 Fill in the blank with the appropriate word.
The ________data type defines a date that is combined with a time of day along with fractional seconds
that is based on a 24-hour clock.
A. datetime
Answer: A

MYSQL   1Z0-870認定証   1Z0-870   1Z0-870参考書   1Z0-870   1Z0-870認定資格

NO.9 Consider the exhibit given below:
Which of the following queries will return the name of the customer who placed the highest amount of
orders and the total order amount?
A. SELECT CUSTOMER, MAX(UNITPRICE*QUANTITY) AS "TOTAL"
FROM ORDERS
GROUP BY CUSTOMER
/
B. SELECT CUSTOMER, SUM(UNITPRICE*QUANTITY) AS "TOTAL"
FROM ORDERS
WHERE SUM(UNITPRICE*QUANTITY)
=
(SELECT MAX(SUM(UNITPRICE*QUANTITY)
)
FROM ORDERS
GROUP BY CUSTOMER)
GROUP BY CUSTOMER
/
C. SELECT CUSTOMER, SUM(UNITPRICE*QUANTITY) AS "TOTAL"
FROM ORDERS
GROUP BY CUSTOMER
HAVING SUM(UNITPRICE*QUANTITY)
=
(SELECT MAX(SUM(UNITPRICE*QUANTITY)
)
FROM ORDERS
GROUP BY CUSTOMER)
/
D. SELECT CUSTOMER, SUM(UNITPRICE*QUANTITY) AS "TOTAL"
FROM ORDERS
GROUP BY CUSTOMER
HAVING SUM(UNITPRICE*QUANTITY)
=
(SELECT SUM(UNITPRICE*QUANTITY)
FROM ORDERS
GROUP BY CUSTOMER)
/
Answer: C

MYSQL過去問   1Z0-870練習問題   1Z0-870   1Z0-870

NO.10 You work as a Database Administrator for Pass4sure.com. The company uses MySQL as its database
development platform. You have created a table named Employees in the database.
You want to display the names of the employees whose salary is more than $5000, but you do not want to
display any duplicate content. Therefore, you have written the following query:
SELECT emp_id, DISTINCT emp_name WHERE salary > 5000
FROM Employees;
Which of the following statements is true about the above query?
A. The statement will display only unique names whose salary is more than $5000.
B. The UNIQUE clause should be used in place of the DISTINCT clause.
C. The statement will give an error.
D. The statement will display those records whose salary is more than $5000.
Answer: C

MYSQL認定試験   1Z0-870   1Z0-870   1Z0-870

NO.11 You work as a Database Administrator for Pass4sure.com. The company uses MySQL as its database.
You have written two statements, which are as follows:
1. SELECT DISTINCT OBJECT_TYPE
FROM USER_OBJECTS;
2. SELECT OBJECT_TYPE
FROM ALL_OBJECTS;
Which of the following options explains the difference between the results of these two
statements? Each correct answer represents a complete solution. Choose all that apply.
A. The first statement will display distinct object types that can be accessed by the user.
B. The second statement will display all object types that a user can access.
C. The first statement will display distinct object types owned by a user.
D. The second statement will display all object types owned by a user.
Answer: B,C

MYSQL認証試験   1Z0-870   1Z0-870認定証   1Z0-870認定資格   1Z0-870練習問題

NO.12 Adam works as a Database Administrator for Pass4sure.com. He creates a table named Students.
He wants to create a new table named Class with the help of the Students table. Which of the following
syntaxes will Adam use to accomplish the task?
A. CREATE TABLE Class
INSERT INTO SELECT * FROM Students;
B. CREATE TABLE Class
FROM SELECT * FROM Students;
C. CREATE TABLE Class
(SELECT * FROM Students);
D. CREATE TABLE Class
AS SELECT * FROM Students;
Answer: D

MYSQL認定資格   1Z0-870   1Z0-870   1Z0-870

NO.13 Fill in the blank with the appropriate word.
A ______specifies that the value of a column (or columns), upon which the index is based, must be
unique.
A. unique index
Answer: A

MYSQL   1Z0-870参考書   1Z0-870

NO.14 Fill in the blank with the appropriate term.
A______ provides a concise and flexible means for matching strings of text,
such as particular characters, words, or patterns of characters.
A. regular expression
Answer: A

MYSQL参考書   1Z0-870   1Z0-870認定証   1Z0-870過去問

NO.15 Which of the following properties of concurrency control refers to the requirement that other operations
cannot access or see the data in an intermediate state during the execution of a transaction?
A. Consistency
B. Durability
C. Atomicity
D. Isolation
Answer: D

MYSQL   1Z0-870   1Z0-870   1Z0-870過去問

NO.16 You work as a Database Administrator for Pass4sure.com. The company uses the MySQL database.
You have created a new table named Employees in the database and performed update operation but
you got an error because of the last transaction. Now, you want to terminate the last transaction. Which of
the following commands can you use to accomplish the task?
Each correct answer represents a complete solution. Choose all that apply.
A. ROLLBACK
B. REMOVE
C. DELETE
D. COMMIT
Answer: A,D

MYSQL問題集   1Z0-870   1Z0-870参考書   1Z0-870   1Z0-870

NO.17 Which of the following are the types of numeric literals that can be used in arithmetic expressions?
Each correct answer represents a complete solution. Choose all that apply.
A. Numeric
B. Integer
C. Binary
D. Real
Answer: B,D

MYSQL認定証   1Z0-870過去問   1Z0-870問題集   1Z0-870認定証   1Z0-870   1Z0-870

NO.18 You work as a Database Administrator for Pass4sure.com. The company uses MySQL as the database
platform. You have created a table named Students in the database. The structure of the table is as
follows:
Stu_ID NUMBER (3) PRIMARY KEY
Stu_Name VARCHAR2 (25) NOT NULL
Fee NUMBER (8, 2)
Class NUMBER (5);
You have executed the following statement for the table "Students":
SELECT e.Stu_Name, m.Fee
FROM Students e, Students m
WHERE e.Stu_ID = m.stu_ID;
Which of the following join types have you used in the above statement?
A. Cross join
B. Equijoin
C. Self join
D. Outer join
Answer: C

MYSQL認定資格   1Z0-870認証試験   1Z0-870練習問題

NO.19 You work as a Database Administrator for Pass4sure.com. The company uses MySQL as its database.
You have created a new table named Employees, which keeps all the information of the
employees. You want to add a new row to the Employees table. Which of the following statements will you
use to accomplish the task?
A. INSERT (column1, column2, ...columnN) INTO <table_name> VALUES(value1, value2, ...v alueN);
B. INSERT INTO <table_name>(column1, column2, ...columnN) VALUES(value1 ,value2,
...va lueN);
C. INSERT <table_name>(column1, column2, ...columnN), VALUES(value1, value2, ...valueN );
D. INSERT INTO <table_name>(column1, column2,... columnN), VALUES(value1, value2, ...v alueN);
Answer: B

MYSQL   1Z0-870   1Z0-870

NO.20 Which of the following are true about UPDATE statements?
Each correct answer represents a complete solution. Choose all that apply.
A. You can use the WHERE clause to have your update affects a specific set of rows.
B. You use the SET clause to update multiple columns of a table separated by commas.
C. You can use co-related sub query in UPDATE statements to update data from other tables.
D. If you don't use the WHERE clause then the UPDATE will not update any rows in the table.
Answer: A,B,C

MYSQL   1Z0-870   1Z0-870   1Z0-870参考書   1Z0-870練習問題

JPexamは最新の1Y0-A26問題集と高品質のC_FSUTIL_60問題と回答を提供します。JPexamのHP2-E59 VCEテストエンジンと1z0-485試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC_HANASUP_1 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/1Z0-870_exam.html

注目を集めているMYSQL 1Z0-871認定試験の人気問題集

あなたの人生に残念と後悔を残しないように、私たちはできるだけ人生を変えるあらゆるチャンスをつかむ必要があります。あなたはそれをやったことができましたか。JPexamのMYSQLの1Z0-871試験トレーニング資料は成功したいIT職員のために作成されたのです。あなたがMYSQLの1Z0-871認定試験に合格することを助けます。成功と擦れ違うことを避けるように速く行動しましょう。

JPexamは多くのIT職員の夢を達成することであるウェブサイトです。IT夢を持っていたら、速くJPexamに来ましょう。 JPexamにはすごいトレーニング即ち MYSQLの1Z0-871試験トレーニング資料があります。これはIT職員の皆が熱望しているものです。あなたが試験に合格することを助けられますから。

あなたはこのような人々の一人ですか。さまざまな資料とトレーニング授業を前にして、どれを選ぶか本当に困っているのです。もしそうだったら、これ以上困ることはないです。JPexamはあなたにとって最も正確な選択ですから。我々はあなたに試験問題と解答に含まれている全面的な試験資料を提供することができます。JPexamの解答は最も正確な解釈ですから、あなたがより良い知識を身につけることに助けになれます。JPexamを利用したら、MYSQLの1Z0-871認定試験に受かることを信じています。それも我々が全てのお客様に対する約束です。

多くのIT業界の友達によるとMYSQL認証試験を準備することが多くの時間とエネルギーをかからなければなりません。もし訓練班とオンライン研修などのルートを通じないと試験に合格するのが比較的に難しい、一回に合格率非常に低いです。JPexamはもっとも頼られるトレーニングツールで、MYSQLの1Z0-871認定試験の実践テストソフトウェアを提供したり、MYSQLの1Z0-871認定試験の練習問題と解答もあって、最高で最新なMYSQLの1Z0-871認定試験問題集も一年間に更新いたします。

試験番号:1Z0-871問題集
試験科目:MySQL 5.0 Developer Certified Professional Exam, Part I
最近更新時間:2014-04-22
問題と解答:全69問
100%の返金保証。1年間の無料アップデート。

MYSQLの1Z0-871試験に受かることを通じて現在の激しい競争があるIT業種で昇進したくて、IT領域で専門的な技能を強化したいのなら、豊富なプロ知識と長年の努力が必要です。MYSQLの1Z0-871試験に受かるのはあなたが自分をIT業種にアピールする方法の一つです。でも、試験に合格するために大量な時間とエネルギーを費やすことはなく、JPexamのMYSQLの1Z0-871試験トレーニング資料を選んだらいいです。JPexamのトレーニング資料はIT認証試験に受かるために特別に研究されたものですから、この資料を手に入れたら難しいMYSQLの1Z0-871認定試験に気楽に合格することができるようになります。

成功の楽園にどうやって行きますか。ショートカットは一つしかないです。それはJPexamのMYSQLの1Z0-871試験トレーニング資料を利用することです。これは全てのIT認証試験を受ける受験生のアドバイスです。JPexamのトレーニング資料を手に入れたら、あなたは成功への鍵を握るようになります。

JPexamはたくさんIT関連認定試験の受験者に利便性を提供して、多くの人がJPexamの問題集を使うので試験に合格しますた。彼らはJPexamの問題集が有効なこと確認しました。JPexamが提供しておりますのは専門家チームの研究した問題と真題で弊社の高い名誉はたぶり信頼をうけられます。安心で弊社の商品を使うために無料なサンブルをダウンロードしてください。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/1Z0-871_exam.html

NO.1 Is the following statement true or false? "Each database corresponds to a single directory under data
directory, regardless of what storage engine table uses in the database"
A. true
B. false
Answer: A

MYSQL   1Z0-871過去問   1Z0-871   1Z0-871認定資格   1Z0-871問題集

NO.2 Which of the following statements are true? Databases don't have a default character set or collation.
A. Databases don't have a default character set or collation.
B. Database have a default character set and a default collation.
C. When creating a table within a database without specifying a character set and a collation, the default
character set and collation from the database are being used.
D. If a default character set and collation are defined for a database, settings for tables defined in that
database will be ignored.
Answer: C,D

MYSQL   1Z0-871問題集   1Z0-871

NO.3 Which of the following are a valid identifier for the user table in the mysql database.?
A. mysql.user
B. `mysql.user`
C. `mysql`.`user`
D. mysql.`user`
Answer: A,C,D

MYSQL   1Z0-871練習問題   1Z0-871   1Z0-871   1Z0-871

NO.4 Which of the following statements will provide a list of all of the databases with a name that starts with
'world'?
A. SELECT SCHEMA_NAME AS `Database` FROM INFORMATION_SCHEMA.SCHEMATA
WHERE SCHEMA_NAME LIKE 'world%'
B. SELECT SCHEMA_NAME AS `Database` FROM SCHEMATA_INFORMATION.SCHEMATA
WHERE SCHEMA_NAME LIKE 'world%'
C. SELECT NAME AS `Database` FROM INFORMATION_SCHEMA.DATABASE WHERE NAME
LIKE 'world%'
D. SELECT NAME AS `Database` FROM SCHEMATA_INFORMATION.DATABASE WHERE
NAME LIKE 'world%'
Answer: A

MYSQL認定証   1Z0-871認定証   1Z0-871   1Z0-871参考書

NO.5 Consider the following:
Which of the quoted values below will be returned for the name field in the SELECT results?
A. ' Tom'
B. ' Tom '
C. 'Tom'
D. 'Tom '
Answer: B

MYSQL   1Z0-871認定資格   1Z0-871   1Z0-871   1Z0-871問題集

NO.6 Which of the following statements will return a list of all of the databases with a name that starts with
'pro'?
A. LIST DATABASES WHERE NAME LIKE 'pro%'
B. SHOW DATABASES WHERE NAME LIKE 'pro%'
C. SELECT DATABASES WHERE NAME LIKE 'pro%'
D. LIST DATABASES LIKE 'pro%'
E. SHOW DATABASES LIKE 'pro%'
F. SELECT DATABASES LIKE 'pro%'
Answer: E

MYSQL認定資格   1Z0-871   1Z0-871   1Z0-871認証試験   1Z0-871問題集

NO.7 Ignoring any warnings that may be issued, which of the following statements will delete the `world`
database and its entire contents on execution, but return no error if it doesn't exist?
A. DROP DATABASE `world` IGNORE ERRORS
B. DROP IF EXISTS DATABASE `world`
C. DROP DATABASE IF EXISTS `world`
D. DELETE DATABASE `world` IGNORE ERRORS
E. DELETE IF EXISTS DATABASE `world`
F. DELETE DATABASE IF EXISTS `world`
Answer: C

MYSQL   1Z0-871認定証   1Z0-871   1Z0-871認証試験

NO.8 You want to create two databases, test and Test. Which of the following statements is true?
A. You can create both databases because database names in MySQL are case sensitive.
B. You can create both databases when your operating system supports case sensitive directory names.
C. You can create both databases when you quote delimited the database names like `test` and `Test`.
D. You can create both databases since t and T are different in the ASCII character set.
Answer: B

MYSQL参考書   1Z0-871認定試験   1Z0-871

NO.9 In non-strict mode, assuming that the table city does not already exist and you execute the following
sequence of commands: CREATE TABLE city (city_name CHAR(5)) INSERT INTO city (city_name)
VALUES ('NEW YORK'), ('TOKYO'), (23+345), ('LONDON') -- Ignoring any errors or warnings that may be
issued, which values are now in the table?
A. 'NEW YORK', 'TOKYO', '23+345', 'LONDON'
B. 'NEW Y', 'TOKYO', '23+34', 'LONDO'
C. 'NEW YORK', 'TOKYO', ' ', 'LONDON'
D. 'NEW Y', 'TOKYO', '368', 'LONDO'
E. 'NEW YORK', 'TOKYO', '368', 'LONDON'
Answer: D

MYSQL   1Z0-871過去問   1Z0-871   1Z0-871

NO.10 Which of the following are true in relation to character set and collation relationships in MySQL?
A. A collation may belong to only one character set.
B. A collation may belong to many character sets.
C. A character set may have only one collation.
D. A character set may have many collations.
Answer: A,D

MYSQL   1Z0-871認定試験   1Z0-871   1Z0-871

JPexamは最新の000-623問題集と高品質の00M-617問題と回答を提供します。JPexamの000-241 VCEテストエンジンとLOT-410試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の000-275 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/1Z0-871_exam.html

MYSQLの1Z0-873認定試験の対応性問題集

MYSQLの1Z0-873試験に合格することは容易なことではなくて、良い訓練ツールは成功の保証でJPexamは君の試験の問題を準備してしまいました。君の初めての合格を目標にします。

MYSQLの1Z0-873認定試験がIT業界には極めて重要な地位があるがよく分かりましょう。試験に合格するのは簡単ではないもよくわかりましょう。“簡単に合格できる方法がありますか?”答えはもちろんですよ。JPexamはこの問題を着々解決できますよ。IT専門家がMYSQLの1Z0-873認定試験に関する特別な問題集を開発しています。それをもって、試験は問題になりませんよ。

JPexam提供した商品の品質はとても良くて、しかも更新のスピードももっともはやくて、もし君はMYSQLの1Z0-873の認証試験に関する学習資料をしっかり勉強して、成功することも簡単になります。

試験番号:1Z0-873問題集
試験科目:MySQL 5.0 Database Administrator Certified Professional Exam, Part I
最近更新時間:2014-04-22
問題と解答:全139問
100%の返金保証。1年間の無料アップデート。

JPexamが提供したMYSQLの1Z0-873トレーニング資料はあなたが自分の夢を実現することを助けられます。 JPexamはすべてのMYSQLの1Z0-873試験に受かるための資料に含まれていますから。JPexamを手にすると、あなたは安心に試験の準備に身を投げられるようになります。JPexamは高品質なトレーニング資料を提供して、あなたが試験に合格することを保証します。明るい未来を準備してあげます。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/1Z0-873_exam.html

NO.1 Which of the following statements are true regarding the data directory on a Windows binary
installation?
A. A script needs to be run to initialize it after installation.
B. It comes pre-initialized.
C. You can choose to pre-initialize it or initialize it manually during the installation.
Answer: B

MYSQL   1Z0-873問題集   1Z0-873   1Z0-873

NO.2 Another user has issued LOCK TABLES pets READ You can...?
A. Update table pets
B. SELECT from table pets
C. UPDATE and SELECT from table pets
D. None of the above
Answer: B

MYSQL   1Z0-873認定資格   1Z0-873練習問題

NO.3 In a standard MySQL installation which of following files are stored below the data directory?
A. Format files for all the tables
B. Data and index files for MyISAM tables
C. InnoDB tablespace files
D. General server logs
E. MySQL upgrade script files
Answer: A,B,C,D

MYSQL   1Z0-873認証試験   1Z0-873練習問題

NO.4 Where is the data stored for a table that is defined as using the FEDERATED Storage Engine?
A. The data will always be stored on the local host.
B. The data will always be stored on a remote host.
C. The data can be stored on any host depending on the definition of the table.
D. The data will always be stored on disk.
E. The data will always be stored in memory.
F. The data will be stored according to the storage engine of the referenced table.
Answer: B

MYSQL   1Z0-873   1Z0-873認証試験   1Z0-873

NO.5 Which of the following is true for the command-line programs mysqlcheck and myisamchk?
A. mysqlcheck must run on the server to perform checks and repairs and myisamchk can perform checks
and repairs on a remote server.
B. mysqlcheck can perform checks and repairs on a remote server, and myisamchk must run on the
server.
C. Both mysqlcheck and myisamchk can perform checks and repairs on a remote server.
D. Neither mysqlcheck or myisamchk can perform checks and repairs on a remote server.
Answer: B

MYSQL過去問   1Z0-873問題集   1Z0-873過去問   1Z0-873

NO.6 Which of the following package types are provided specifically for UNIX-style OS installations?
A. Essentials
B. RPM
C. Source
D. tar-packaged binary
Answer: B

MYSQL認定試験   1Z0-873認定試験   1Z0-873   1Z0-873認定試験   1Z0-873認証試験

NO.7 When making connections to a MySQL server on a Unix platform, which of the following is true?
A. TCP/IP connections are faster than socket file connections.
B. Socket file connections are faster than TCP/IP connections.
C. TCP/IP and Socket file connections are equally as fast.
Answer: B

MYSQL   1Z0-873認定資格   1Z0-873認定資格

NO.8 Which mysqld command line option disables incoming TCP/IP connections?
A. --shared-memory
B. --memlock
C. --no-networking
D. --skip-networking
Answer: D

MYSQL認証試験   1Z0-873   1Z0-873

NO.9 MySQL is a multi-threaded database server. Every connection to the database server is handled by it's
own thread.
A. True
B. False
Answer: A

MYSQL   1Z0-873   1Z0-873   1Z0-873   1Z0-873参考書

NO.10 Which of the following are requirements for InnoDB binary portability?
A. Both machines must use the same operating system.
B. Database and table names must use lowercase format.
C. Both machines must use two's-complement integer arithmetic.
D. Both machines must use IEEE floating-point format or contain no floating-point columns.
Answer: B

MYSQL認定試験   1Z0-873   1Z0-873

NO.11 Which of the following statements are true for locks established by the InnoDB storage engine?
A. It sometimes escalates locks to page level.
B. It sometimes escalates locks to table level.
C. It sometimes escalates locks to page or table level.
D. It never escalates locks to page or table level.
Answer: D

MYSQL   1Z0-873認定資格   1Z0-873   1Z0-873

NO.12 Of the following mechanisms available to connect a MySQL client to a MySQL database server, which
types of connections are only available on Windows based systems?
A. TCP/IP
B. Sockets
C. Shared Memory
D. Named Pipes
Answer: C,D

MYSQL認証試験   1Z0-873   1Z0-873   1Z0-873

NO.13 Which of the following APIs/connectors are included in a MySQL distribution?
A. Connector/J
B. Connector/ODBC
C. C API
D. Connector/NET
E. Connector/MJX
Answer: C

MYSQL   1Z0-873認証試験   1Z0-873   1Z0-873過去問

NO.14 mysqldump can be instructed to dump...
A. Only table structures
B. Only data
C. Both table structures and data
Answer: C

MYSQL過去問   1Z0-873問題集   1Z0-873参考書   1Z0-873認定資格

NO.15 Which of the following statements correctly describes the way to enable and use shared memory
connections to the MySQL database server?
A. Shared memory connections are available by default on all platforms, but must have TCP/IP
networking disabled by using the --skip-networking option.
B. Shared memory connections are supported on all windows binaries, and is enabled by default.
C. Shared memory connections are supported on all windows binaries, and must be enabled by using the
--shared-memory command line option.
D. Shared memory is not a supported communication method for the MySQL database server.
Answer: C

MYSQL   1Z0-873認証試験   1Z0-873

NO.16 Which of the following best describes how MySQL utilizes the grant table buffers?
A. The grant table buffer loads grant table information into memory for fast access.
B. The grant table buffer loads what users are currently logged in and performing queries.
C. The grant table buffer holds requests waiting to check the grant table to perform access-control.
Answer: A

MYSQL   1Z0-873認定試験   1Z0-873   1Z0-873認証試験   1Z0-873認定試験

NO.17 Which of the following is true of a MySQL client and server?
A. They must be run on the same type of Operating System.
B. They must be run on the same hardware architecture.
C. They do not have to be run on the same type of Operating System.
D. They do not have to be run on the same hardware architecture.
Answer: C,D

MYSQL   1Z0-873問題集   1Z0-873参考書

NO.18 Which one of the following statements can be used to start MySQL 5.0 manually from the command line
on windows?
A. C:\> C:\Program Files\MySQL\MySQL Server 5.0\bin\mysqladmin -u root start
B. C:\> C:\Program Files\MySQL\MySQL Server 5.0\bin\mysqld
C. C:\> C:\Program Files\MySQL\MySQL Server 5.0\bin\mysql_start
Answer: B

MYSQL   1Z0-873   1Z0-873

NO.19 Which of the following is true for how the InnoDB storage engine uses diskspace?
A. It stores its data, index and undo information all in its own tablespace.
B. It stores its data in .MYD files, in the respective database directory, and its index and undo information
in its own tablespace.
C. It stores its data and index in .MYD and .MYI files, in the respective database directory, and undo
information in its own tablespace.
D. It stores its data, index and undo information in .MYD and .MYI files, in the respective database
directory.
Answer: A

MYSQL   1Z0-873   1Z0-873認定試験   1Z0-873認定試験

NO.20 Which of the following best describes the processing model for how the MySQL server handles
queries?
A. The server uses a one-tier processing model in which each storage engine optimizes and processes
each query issued against it.
B. The server uses a two-tier processing model: a SQL/optimizer tier and a storage engine tier.
C. The server uses a three-tier processing model: a SQL/optimizer tier, a formatting tier and a storage
engine tier.
Answer: B

MYSQL認証試験   1Z0-873参考書   1Z0-873練習問題

JPexamは最新のCAT-380問題集と高品質の000-198問題と回答を提供します。JPexamのJN0-314 VCEテストエンジンと000-318試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の644-068 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/1Z0-873_exam.html

2014年3月11日星期二

MYSQL 005-002試験の認証資格は一層重要になった

MYSQLの認定試験は最近ますます人気があるようになっています。IT認定試験は様々あります。どの試験を受験したことがありますか。たとえば005-002認定試験などです。これらは全部大切な試験です。どちらを受験したいですか。ここで言いたいのは005-002試験です。この試験を受けたいなら、JPexamの005-002問題集はあなたが楽に試験に合格するのを助けられます。

偉大な事業を実現するために信心を持つ必要があります。あなたは自分の知識レベルを疑っていて試験の準備をする前に詰め込み勉強しているときに、自分がどうやって試験に受かることを確保するかを考えましたか。心配しないでください。JPexamはあなたがMYSQLの005-002認定試験に合格する確保です。JPexam のトレーニング試験は問題と解答に含まれています。しかも100パーセントの合格率を保証できます。JPexamのMYSQLの005-002試験トレーニング資料を手に入れたら、あなたは自分の第一歩を進めることができます。試験に合格してから、あなたのキャリアは美しい時期を迎えるようになります。

わずか数年の中に、MYSQL 005-002認定試験がたくさんの人の日常生活にとても大きい影響を与えています。簡単で順調にMYSQL 005-002認定試験を通すのは問題になりますが、JPexamはこの問題を解決できるよ。弊社の問題集はIT技術者がこつこつ研究して、正確で最新なもので君の005-002認定試験を簡単に通すことにいいトレーニングツールになりますよ。JPexamを選られば、成功しましょう。

005-002認定試験について、あなたはどうやって思っているのですか。非常に人気があるMYSQLの認定試験の一つとして、この試験も大切です。しかし、試験の準備をよりよくできるために試験参考書を探しているときに、優秀な参考資料を見つけるのはたいへん難しいことがわかります。では、どうしたらいいでしょうか。大丈夫ですよ。JPexamはあなたの望みを察して、受験生の皆さんの要望にこたえるために、一番良い試験005-002問題集を提供してあげます。

業種別の人々は自分が将来何か成績を作るようにずっと努力しています。IT業種で勤めているあなたもきっとずっと努力して自分の技能を向上させているでしょう。では、最近最も人気があるMYSQLの005-002認定試験の認証資格を既に取りましたか。005-002試験に対して、あなたはいくらぐらい分かっていますか。もしこの試験に関連する知識が非常に不足であると同時にこの試験に合格したい場合、あなたはどうするつもりですか。そうですか。どうするか全然分からないですか。そうしても焦らないでください。JPexamはあなたに援助を提供します。

試験番号:005-002問題集
試験科目:Certified MySQL 5.0 DBA Part I
最近更新時間:2014-03-11
問題と解答:全140問
100%の返金保証。1年間の無料アップデート。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/005-002_exam.html

NO.1 mysqldump can be instructed to include commands to drop and recreate tables before trying to create
or load data.
A. True
B. False
Answer: A

MYSQL   005-002   005-002   005-002

NO.2 Which of the following are some general capabilites of the mysql client program?
A. Create and Drop databases
B. Ping the server
C. Create, Drop, and modify tables and indexes.
D. Shutdown the server.
E. Create users.
F. Display replication server status.
Answer: ACEF

MYSQL練習問題   005-002認定資格   005-002   005-002認証試験   005-002

NO.3 Which of the following are some general properties of the mysqlimport client program?
A. It loads data files into tables.
B. It can load files only on the server host.
C. It provides a command-line interface to the LOAD DATA INFILE.
D. It can load files both on the client and server host.
E. It bypasses the server and writes directly to the corresponding data files.
Answer: ACD

MYSQL   005-002練習問題   005-002   005-002   005-002

NO.4 Which of the following steps should be taken to restore an InnoDB table to a consistent state without
having to shutdown the server?
A. Run the REPAIR TABLE command.
B. Dump the table with mysqldump, drop the table then re-create from the dump file.
C. Run the CHECK TABLE command.
D. Dump the table with mysqlhotcopy, drop the table then re-create with the backup file.
Answer: B

MYSQL   005-002   005-002   005-002

NO.5 Which of the following are some benefits of using MySQL built binaries over binaries built by yourself?
A. They are highly optimized.
B. They are cross-platform.
C. Many are built using commercial compilers that produce a better quality build than with freely available
compilers.
D. They will work with tools such as MySQL Administrator and MySQL Query Browser.
E. They may include libraries not available in the standard operating system library.
Answer: ACE

MYSQL認定資格   005-002   005-002   005-002認証試験   005-002過去問

NO.6 Which of the following statements are true regarding the InnoDB storage engine?
A. It uses multiversioning to isolate transactions.
B. It is not possible for deadlocks to occur.
C. It does not isolate transactions.
D. It is possible for deadlocks to occur.
Answer: AD

MYSQL   005-002   005-002参考書   005-002   005-002

NO.7 Which of the following correctly defines dirty reads, non-repeatable reads and phantom row?
A. A dirty read is a read by one transaction of uncommitted changes made by another transaction.
B. A dirty read is a read by one transaction of its uncommitted changes.
C. A non-repeatable read occurs when a transaction performs the same retreival twice but gets a different
result each time.
D. A non-repeatable read is a row that appears where it was not visible before.
E. A phantom is a row that appears where it was not visible before.
F. A phantom is a read by one transaction of uncommitted changes made by another transaction.
Answer: ACE

MYSQL   005-002問題集   005-002   005-002認定証   005-002認定試験

NO.8 Which of the following APIs/connectors are included in a MySQL distribution?
A. Connector/J
B. Connector/ODBC
C. C API
D. Connector/NET
E. Connector/MJX
Answer: C

MYSQL   005-002認定証   005-002認定証   005-002

NO.9 Which of the following are true regarding the table cache?
A. It is used to cache row data in open tables
B. It holds file descriptors for open tables
C. The size of the table cache may be set per-session
D. Each connection has its own table cache. They are of equal size, set globally.
E. There is one table cache, shared among all sessions.
F. Increasing the size of the variable table_cache allows mysqld to keep more tables open simultaneously
Answer: BEF

MYSQL参考書   005-002   005-002認定証   005-002過去問

NO.10 The ANALYZE TABLE command should be used...
A. When you need to find out why a query is taking a long time to execute.
B. To improve performance by updating index distribution statistics.
C. After large amounts of table data have changed.
D. To check a tables structure to see if it may have been damaged and needs repair.
Answer: BC

MYSQL   005-002参考書   005-002問題集

NO.11 Which of the following best describes the scope of explicitly and implicitly set locks?
A. Explicitly set locks may span several commands.
B. Implicitly set locks may span several commands.
C. Implicitly set locks will span only one statement or transaction.
D. Explicitly set locks will span only one statement or transaction.
Answer: ABC

MYSQL   005-002   005-002過去問

NO.12 What are some advantages of using the SHOW command rather than using the
INFORMATION_SCHEMA?
A. It is available for releases older than MySQL 5.0.
B. It returns results quicker than using the INFORMATION_SCHEMA.
C. Using SHOW can provide more concise information.
D. SHOW is a feature of standard SQL, and INFORMATION_SCHEMA is a MySQL specific command.
Answer: AC

MYSQL   005-002認定資格   005-002

NO.13 Another user has issued the statement LOCK TABLE pets FOR WRITE
You can...
A. Update table pets
B. SELECT from table pets
C. Update and SELECT from table pets
D. None of the above
Answer: D

MYSQL参考書   005-002   005-002認定資格   005-002   005-002認定試験

NO.14 Consider the following query:
DELETE FROM INFORMATION_SCHEMA.TABLES
WHERE table_schema = 'world'
AND table_name = 'Country'
What would be the result of executing this query?
A. An error would be issued
B. A warning would be issued
C. The row would be deleted from the INFORMATION_SCHEMA.TABLES table, and the table Country
would be dropped from the world database
D. The row would be deleted from the INFORMATION_SCHEMA, but the table Country in the world
database would be unaffected.
Answer: A

MYSQL   005-002   005-002過去問   005-002認証試験

NO.15 Which mysqld command line option disables incoming TCP/IP connections?
A. --shared-memory
B. --memlock
C. --no-networking
D. --skip-networking
Answer: D

MYSQL練習問題   005-002過去問   005-002   005-002   005-002   005-002

NO.16 Will the following SELECT query list all of the tables in the INFORMATION_SCHEMA database? If not,
why?
SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
WHERE TABLE_SCHEMA = 'INFORMATION_SCHEMA'
ORDER BY TABLE_NAME
A. Yes.
B. No; the INFORMATION_SCHEMA database does not contain information on itself.
C. No; the WHERE clause is incorrect. The correct field name is TABLE_SCHEMATA.
D. No; there is no table in the INFORMATION_SCHEMA database called TABLES.
Answer: A

MYSQL過去問   005-002認定資格   005-002   005-002過去問   005-002

NO.17 In a standard MySQL installation which of following files are stored below the data directory?
A. Format files for all the tables
B. Data and index files for MyISAM tables
C. InnoDB tablespace files
D. General server logs
E. MySQL upgrade script files
Answer: ABCD

MYSQL   005-002   005-002   005-002過去問   005-002

NO.18 Which of the following best describes why table locking is often not desirable compared to page or row
locking?
A. Table locks can have deadlocks.
B. Table locks create concurrency issues.
C. Table locks prevent other clients from making any changes to the table until released.
D. Table locks can cause data corruption issues if more than one client tries to make changes while
locked.
Answer: BC

MYSQL   005-002認定資格   005-002認証試験   005-002   005-002問題集

NO.19 Which of the following actions are performed during an RPM installation of the MySQL server
package?
A. Setup a mysql user
B. Setup a mysql group
C. Initialize the data directory
D. Setup passwords for all default accounts.
Answer: ABC

MYSQL   005-002認定証   005-002認定資格   005-002

NO.20 Which of the following statements are true?
A. InnoDB supports Foreign Keys.
B. MyISAM supports Foreign Keys.
C. InnoDB supports cascaded DELETE statements.
D. MyISAM supports cascaded DELETE statements.
E. InnoDB supports cascaded UPDATE statements.
F. MyISAM supports cascaded UPDATE statements.
Answer: ACE

MYSQL   005-002   005-002   005-002練習問題

NO.21 What are some properties of using LOCK TABLE?
A. Less work is required by the server to acquire and release locks.
B. It can only be used with the MyISAM storage engine.
C. Using LOCK TABLE sometimes decreases the amount disk reads and writes needed for a group of
statements.
D. All tables must be locked in a single statement.
E. It creates more disk activity.
Answer: ACD

MYSQL   005-002認定試験   005-002   005-002練習問題

NO.22 Assume you compile MySQL from source and invoke configure with the following options.
--with-charset=latin1 --with-extra-charsets=utf8,ucs2
Compared to a standard binary installation that contains many more character sets, which of the following
statements is/are true?
A. The compiled version will use less disk space, because only a few character sets will be installed on
disk.
B. The compiled version will use less memory, because only a few character sets will be loaded by the
server.
C. The compiled version will use less file handles, because only a few files need to be opened when the
server is started.
Answer: AB

MYSQL練習問題   005-002   005-002認定試験   005-002問題集   005-002

NO.23 MySQL is a multi-threaded database server. Every connection to the database server is handled by
it's own thread.
A. True
B. False
Answer: A

MYSQL   005-002   005-002過去問   005-002   005-002練習問題   005-002

NO.24 Suppose you have a column in which most records are going to be between 30 and 32 characters.
Which of the following column types would be most efficient?
A. VARCHAR
B. CHAR
C. TEXT
D. Either VARCHAR or CHAR
Answer: B

MYSQL   005-002認定試験   005-002   005-002過去問

NO.25 Which of the following are true for how BTREE and HASH index types should be used for MEMORY
tables?
A. HASH index types are only for use with equality comparisions such as those using the = and <=>
operators.
B. BTREE index types are preferable for use with comparisons that do not just use equality operators
such as = and <=>
C. BTREE index types are only for use with equality comparisons such as those using the = and <=>
operators.
D. HASH index types are preferable for use with comparisons that do not just use equality operators such
as = and <=>
Answer: AB

MYSQL認証試験   005-002   005-002過去問   005-002

NO.26 Which of the following statements is true for mysqldump?
A. It can dump data only on remote servers.
B. It can dump data only on the local server.
C. It can dump data on both local and remote servers.
Answer: C

MYSQL認定試験   005-002   005-002問題集

NO.27 Index analysis and optimization using ANALYZE and OPTIMIZE statements should...
A. generally never be run manually
B. be run once the table reaches 100,000 rows or above
C. be run when more than 5% of the rows are changed by a single statement
D. be run when EXPLAIN SELECT shows that an inordinate amount of rows is expected to be read during
query execution
E. be run when you suspect that a table is heavily fragmented
Answer: DE

MYSQL   005-002   005-002   005-002認定資格   005-002   005-002

NO.28 Which of the following statements are true regarding table locks?
A. They can only be released by the client holding them.
B. They can be released by other connections than the client holding them.
C. They are implicitly released when the connection is closed.
D. They are not released when the connection is closed
Answer: AC

MYSQL   005-002   005-002   005-002練習問題

NO.29 Suppose you have a server that has been started with the --myisam-recover option. When does the
server perform the check on the MyISAM tables?
A. Each time the server is started.
B. Each time it encounters an error.
C. Each time it opens the MyISAM table files.
D. Each time the CHECK TABLE command is issued.
Answer: C

MYSQL認定試験   005-002   005-002認定試験   005-002

NO.30 Which of the following are requirements for MyISAM binary portability?
A. Both machines must use the same operating system.
B. Database and table names must use lowercase format.
C. Both machines must use IEEE floating-point format or contain no floating-point columns.
D. Both machines must use two's-complement integer arithmetic.
Answer: CD

MYSQL認証試験   005-002認定資格   005-002練習問題

JPexamは最新の70-489問題集と高品質の00M-624問題と回答を提供します。JPexamの200-001 VCEテストエンジンとCTAL-TM_Syll2012試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のMB6-700 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/005-002_exam.html

2014年2月23日星期日

MYSQLの1Z0-874 1Z0-873 1Z0-872 1Z0-871 1Z0-870認定試験に出題される可能性が高い問題は何だろう

1Z0-874 1Z0-873 1Z0-872 1Z0-871 1Z0-870認定試験を受験したいですか。1Z0-874 1Z0-873 1Z0-872 1Z0-871 1Z0-870認証資格を取得したいですか。試験に準備する時間が足りないあなたは、どうやって試験に合格できますか。しようがないわけではないです。短時間の準備でも楽に試験に合格することができるようになりますよ。それでは、どのようにすればそれを達成できますか。実は方法がとても簡単です。すなわちJPexamの1Z0-874 1Z0-873 1Z0-872 1Z0-871 1Z0-870問題集を利用して試験の準備をすることです。

いつもあなたに最高の1Z0-874 1Z0-873 1Z0-872 1Z0-871 1Z0-870認定試験に関連する試験参考書を与えられるために、JPexamは常に問題集の質を改善し、ずっと最新の試験のシラバスに応じて問題集を更新しています。現在の市場では、JPexamはあなたの最もよい選択です。長い間にわたって、JPexamは多くの受験生に認可されました。私を信じていないなら、周りの人々に聞いてみてもいいです。JPexamの試験問題集を利用したことがある人がきっといますから。JPexamは最優秀な試験1Z0-874 1Z0-873 1Z0-872 1Z0-871 1Z0-870参考書を提供してあなたを試験に合格させることを保証します。

JPexamの1Z0-874 1Z0-873 1Z0-872 1Z0-871 1Z0-870問題集は素晴らしい参考資料です。この問題集は絶対あなたがずっと探しているものです。これは受験生の皆さんのために特別に作成し出された試験参考書です。この参考書は短い時間で試験に十分に準備させ、そして楽に試験に合格させます。試験のためにあまりの時間と精力を無駄にしたくないなら、JPexamの1Z0-874 1Z0-873 1Z0-872 1Z0-871 1Z0-870問題集は間違いなくあなたに最もふさわしい選択です。この資料を使用すると、あなたの学習効率を向上させ、多くの時間を節約することができます。

試験番号:1Z0-874問題集
試験科目:MySQL 5.0 Database Administrator Certified Professional Exam, Part II
最近更新時間:2014-02-23
問題と解答:全140問
100%の返金保証。1年間の無料アップデート。

試験番号:1Z0-873問題集
試験科目:MySQL 5.0 Database Administrator Certified Professional Exam, Part I
最近更新時間:2014-02-23
問題と解答:全139問
100%の返金保証。1年間の無料アップデート。

試験番号:1Z0-872問題集
試験科目:MySQL 5.0 Developer Certified Professional Exam, Part II
最近更新時間:2014-02-23
問題と解答:全70問
100%の返金保証。1年間の無料アップデート。

試験番号:1Z0-871問題集
試験科目:MySQL 5.0 Developer Certified Professional Exam, Part I
最近更新時間:2014-02-23
問題と解答:全69問
100%の返金保証。1年間の無料アップデート。

試験番号:1Z0-870問題集
試験科目:MySQL 5.0, 5.1 and 5.5 Certified Associate Exam
最近更新時間:2014-02-23
問題と解答:全240問
100%の返金保証。1年間の無料アップデート。

MYSQLの1Z0-874 1Z0-873 1Z0-872 1Z0-871 1Z0-870認定試験と言ったら、人々は迷っています。異なる考えがありますが、要約は試験が大変難しいことです。MYSQLの1Z0-874 1Z0-873 1Z0-872 1Z0-871 1Z0-870認定試験は確かに難しい試験ですが、JPexam を選んだら、これは大丈夫です。JPexamのMYSQLの1Z0-874 1Z0-873 1Z0-872 1Z0-871 1Z0-870試験トレーニング資料は受験生としてのあなたが欠くことができない資料です。それは受験生のために特別に作成したものですから、100パーセントの合格率を保証します。信じないになら、JPexamのサイトをクリックしてください。購入する人々が大変多いですから、あなたもミスしないで速くショッピングカートに入れましょう。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/1Z0-870_exam.html

NO.1 You work as a Database Administrator for Pass4sure.com. The company uses MySQL as its database.
You have created a table named Employees in the database. You want to create a list of
employees working in the organization, but you do not want to display any duplicate row in the report.
Which of the following statements will help you to accomplish the task?
A. SELECT emp_id, emp_name FROM Employees ORDER BY emp_id;
B. SELECT emp_id, emp_name FROM Employees;
C. SELECT DISTINCT emp_id, emp_name FROM Employees;
D. SELECT emp_id, emp_name FROM Employees GROUP BY emp_id;
Answer: C

MYSQL   1Z0-870認定試験   1Z0-870認定試験   1Z0-870

NO.2 Which of the following statements is correct for equijoin used to join two tables named Employees and
Department?
A. SELECT Dept_Name, Emp_Name
FROM Departments d1, Employees e1
ORDER BY Dept_Name, Emp_Name;
B. SELECT D.Dept_Name, E.Emp_Name
FROM Departments d1, Employees e1
HAVING Dept_Name, Emp_Name;
C. SELECT E.Emp_Name, D.Dept_Name
FROM Departments d1, Employees e1
WHERE Dept_No = Dept_No
ORDER BY Dept_Name, Emp_Name;
D. SELECT Dept_Name, Emp_Name
FROM Departments d1, Employees e1
WHERE d1.Dept_No = e1.Dept_No
ORDER BY Dept_Name, Emp_Name;
Answer: D

MYSQL認定資格   1Z0-870認証試験   1Z0-870認定資格   1Z0-870認定試験

NO.3 Which of the following terms is described in the statement below?
"It is procedural code that is automatically executed in response to certain events on a particular table or
view in a database."
A. Data type
B. Table
C. Datetime data type
D. Database trigger
Answer: D

MYSQL練習問題   1Z0-870問題集   1Z0-870認証試験   1Z0-870   1Z0-870

NO.4 You work as a Database Administrator for Pass4sure.com. The company uses MySQL as its database.
You have written two statements, which are as follows:
1. SELECT DISTINCT OBJECT_TYPE
FROM USER_OBJECTS;
2. SELECT OBJECT_TYPE
FROM ALL_OBJECTS;
Which of the following options explains the difference between the results of these two
statements? Each correct answer represents a complete solution. Choose all that apply.
A. The first statement will display distinct object types that can be accessed by the user.
B. The second statement will display all object types that a user can access.
C. The first statement will display distinct object types owned by a user.
D. The second statement will display all object types owned by a user.
Answer: B,C

MYSQL   1Z0-870   1Z0-870認定試験   1Z0-870参考書

NO.5 DRAG DROP
Drag and drop the correct constraint types to their corresponding specifications.
Answer:

NO.6 You work as a Database Administrator for Pass4sure.com. The company uses MySQL as its database.
You have created a new table named Employees, which keeps all the information of the
employees. You want to add a new row to the Employees table. Which of the following statements will you
use to accomplish the task?
A. INSERT (column1, column2, ...columnN) INTO <table_name> VALUES(value1, value2, ...v alueN);
B. INSERT INTO <table_name>(column1, column2, ...columnN) VALUES(value1 ,value2,
...va lueN);
C. INSERT <table_name>(column1, column2, ...columnN), VALUES(value1, value2, ...valueN );
D. INSERT INTO <table_name>(column1, column2,... columnN), VALUES(value1, value2, ...v alueN);
Answer: B

MYSQL過去問   1Z0-870   1Z0-870認定試験

NO.7 You work as a Database Administrator for Pass4sure.com. The company uses MySQL as the database
platform. You have created a table named Students in the database. The structure of the table is as
follows:
Stu_ID NUMBER (3) PRIMARY KEY
Stu_Name VARCHAR2 (25) NOT NULL
Fee NUMBER (8, 2)
Class NUMBER (5);
You have executed the following statement for the table "Students":
SELECT e.Stu_Name, m.Fee
FROM Students e, Students m
WHERE e.Stu_ID = m.stu_ID;
Which of the following join types have you used in the above statement?
A. Cross join
B. Equijoin
C. Self join
D. Outer join
Answer: C

MYSQL   1Z0-870   1Z0-870   1Z0-870   1Z0-870過去問

NO.8 Adam works as a Database Administrator for Pass4sure.com. The company uses MySQL as its
database. Adam has created a table named Employees in the database. He wants to retrieve the
information of those employees who have at least one person reporting to them. Which of the following
queries will Adam execute to accomplish the task?
A. SELECT employee_id, last_name, job_id, department_id FROM Employees WHERE
employee_id EXISTS (SELECT manager_id WHERE manager_id is NULL);
B. SELECT employee_id, last_name, job_id, department_id FROM Employees HAVING
employee_id IN (SELECT manager_id FROM Employees WHERE manager_id is NOT NULL);
C. SELECT employee_id, last_name, job_id, department_id FROM Employees outer WHERE EXISTS
(SELECT 'x' FROM Employees WHERE manager_id = outer.employee_id);
D. SELECT employee_id, last_name, job_id, department_id FROM Employees WHERE
employee_id IN (SELECT manager_id WHERE manager_id is NOT NULL);
Answer: C

MYSQL   1Z0-870   1Z0-870   1Z0-870練習問題

NO.9 Which of the following are true about UPDATE statements?
Each correct answer represents a complete solution. Choose all that apply.
A. You can use the WHERE clause to have your update affects a specific set of rows.
B. You use the SET clause to update multiple columns of a table separated by commas.
C. You can use co-related sub query in UPDATE statements to update data from other tables.
D. If you don't use the WHERE clause then the UPDATE will not update any rows in the table.
Answer: A,B,C

MYSQL問題集   1Z0-870   1Z0-870   1Z0-870

NO.10 You work as a Database Administrator for Pass4sure.com. The company uses MySQL as its database
development platform. You have created a table named Employees in the database.
You want to display the names of the employees whose salary is more than $5000, but you do not want to
display any duplicate content. Therefore, you have written the following query:
SELECT emp_id, DISTINCT emp_name WHERE salary > 5000
FROM Employees;
Which of the following statements is true about the above query?
A. The statement will display only unique names whose salary is more than $5000.
B. The UNIQUE clause should be used in place of the DISTINCT clause.
C. The statement will give an error.
D. The statement will display those records whose salary is more than $5000.
Answer: C

MYSQL過去問   1Z0-870   1Z0-870   1Z0-870

NO.11 Consider the exhibit given below:
Which of the following queries will return the name of the customer who placed the highest amount of
orders and the total order amount?
A. SELECT CUSTOMER, MAX(UNITPRICE*QUANTITY) AS "TOTAL"
FROM ORDERS
GROUP BY CUSTOMER
/
B. SELECT CUSTOMER, SUM(UNITPRICE*QUANTITY) AS "TOTAL"
FROM ORDERS
WHERE SUM(UNITPRICE*QUANTITY)
=
(SELECT MAX(SUM(UNITPRICE*QUANTITY)
)
FROM ORDERS
GROUP BY CUSTOMER)
GROUP BY CUSTOMER
/
C. SELECT CUSTOMER, SUM(UNITPRICE*QUANTITY) AS "TOTAL"
FROM ORDERS
GROUP BY CUSTOMER
HAVING SUM(UNITPRICE*QUANTITY)
=
(SELECT MAX(SUM(UNITPRICE*QUANTITY)
)
FROM ORDERS
GROUP BY CUSTOMER)
/
D. SELECT CUSTOMER, SUM(UNITPRICE*QUANTITY) AS "TOTAL"
FROM ORDERS
GROUP BY CUSTOMER
HAVING SUM(UNITPRICE*QUANTITY)
=
(SELECT SUM(UNITPRICE*QUANTITY)
FROM ORDERS
GROUP BY CUSTOMER)
/
Answer: C

MYSQL   1Z0-870   1Z0-870

NO.12 Which of the following will be true about a table column if you plan to create an index on that column?
Each correct answer represents a complete solution. Choose all that apply.
A. The column is often used in the WHERE clause of SQL statements.
B. The column contains very small number of NULL values.
C. The table is updated frequently.
D. The column should contain a wide range of values.
Answer: A,D

MYSQL   1Z0-870   1Z0-870練習問題   1Z0-870参考書

NO.13 Which of the following are the types of numeric literals that can be used in arithmetic expressions?
Each correct answer represents a complete solution. Choose all that apply.
A. Numeric
B. Integer
C. Binary
D. Real
Answer: B,D

MYSQL   1Z0-870参考書   1Z0-870認定証   1Z0-870

NO.14 Which of the following properties of concurrency control refers to the requirement that other operations
cannot access or see the data in an intermediate state during the execution of a transaction?
A. Consistency
B. Durability
C. Atomicity
D. Isolation
Answer: D

MYSQL   1Z0-870   1Z0-870   1Z0-870

NO.15 Adam works as a Database Administrator for Pass4sure.com. He creates a table named Students.
He wants to create a new table named Class with the help of the Students table. Which of the following
syntaxes will Adam use to accomplish the task?
A. CREATE TABLE Class
INSERT INTO SELECT * FROM Students;
B. CREATE TABLE Class
FROM SELECT * FROM Students;
C. CREATE TABLE Class
(SELECT * FROM Students);
D. CREATE TABLE Class
AS SELECT * FROM Students;
Answer: D

MYSQL問題集   1Z0-870練習問題   1Z0-870   1Z0-870

NO.16 You work as a Database Administrator for Pass4sure.com. The company uses MySQL as its database.
You have created two tables named Employees and Departments in the database. Now, you want to
display data from both tables. Which of the following actions will you perform to accomplish the task.?
A. Join
B. Table Merge operator
C. HAVING
D. GROUP BY
Answer: A

MYSQL認定資格   1Z0-870   1Z0-870   1Z0-870認定資格

NO.17 Fill in the blank with the appropriate word.
A ______specifies that the value of a column (or columns), upon which the index is based, must be
unique.
A. unique index
Answer: A

MYSQL   1Z0-870問題集   1Z0-870問題集

NO.18 You work as a Database Administrator for Pass4sure.com. The company uses the MySQL database.
You have created a new table named Employees in the database and performed update operation but
you got an error because of the last transaction. Now, you want to terminate the last transaction. Which of
the following commands can you use to accomplish the task?
Each correct answer represents a complete solution. Choose all that apply.
A. ROLLBACK
B. REMOVE
C. DELETE
D. COMMIT
Answer: A,D

MYSQL認定資格   1Z0-870認定試験   1Z0-870   1Z0-870

NO.19 Fill in the blank with the appropriate word.
The ________data type defines a date that is combined with a time of day along with fractional seconds
that is based on a 24-hour clock.
A. datetime
Answer: A

MYSQL   1Z0-870   1Z0-870過去問   1Z0-870参考書

NO.20 Fill in the blank with the appropriate term.
A______ provides a concise and flexible means for matching strings of text,
such as particular characters, words, or patterns of characters.
A. regular expression
Answer: A

MYSQL認定証   1Z0-870   1Z0-870認定試験   1Z0-870認定証   1Z0-870