CompTIA Certification PD1-001 exam pdf

Success is has method. You can be successful as long as you make the right choices. IT-Tests.com's CompTIA PD1-001 exam training materials are tailored specifically for IT professionals. It can help you pass the exam successfully. If you're still catching your expertise to prepare for the exam, then you chose the wrong method. This is not only time-consuming and laborious, but also is likely to fail. But the remedy is not too late, go to buy IT-Tests.com's CompTIA PD1-001 exam training materials quickly. With it, you will get a different life. Remember, the fate is in your own hands.

You can free download part of IT-Tests's practice questions and answers about CompTIA certification PD1-001 exam online, as an attempt to test our quality. As long as you choose to purchase IT-Tests's products, we will do our best to help you pass CompTIA certification PD1-001 exam disposably.

Exam Code: PD1-001
Exam Name: CompTIA (CompTIA PDI+ Beta Exam)
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 861 Questions and Answers
Last Update: 2013-11-14

If you are still struggling to prepare for passing PD1-001 certification exam, at this moment IT-Tests.com can help you solve problem. IT-Tests.com can provide you training materials with good quality to help you pass the exam, then you will become a good CompTIA PD1-001 certification member. If you have decided to upgrade yourself by passing CompTIA certification PD1-001 exam, then choosing IT-Tests.com is not wrong. Our IT-Tests.com promise you that you can pass your first time to participate in the CompTIA certification PD1-001 exam and get CompTIA PD1-001 certification to enhance and change yourself.

Whole IT-Tests's pertinence exercises about CompTIA certification PD1-001 exam is very popular. IT-Tests's training materials can not only let you obtain IT expertise knowledge and a lot of related experience, but also make you be well prepared for the exam. Although CompTIA certification PD1-001 exam is difficult, through doing IT-Tests's exercises you will be very confident for the exam. Be assured to choose IT-Tests.com efficient exercises right now, and you will do a full preparation for CompTIA certification PD1-001 exam.

PD1-001 (CompTIA PDI+ Beta Exam) Free Demo Download: http://www.it-tests.com/PD1-001.html

NO.1 How many CCDs are located in a single pass duplex ADF?
A.One
B.2
C.3
D.4
Answer: B

CompTIA   PD1-001 braindump   PD1-001 dumps   PD1-001 test

NO.2 The proper safety guidelines for handling any device specific consumables can be found in which of
the following documentation?
A.Material Safety Data Sheets
B.Installation Guides
C.Consumer Reports
D.Devices Parts Catalog
Answer: A

CompTIA original questions   PD1-001   PD1-001

NO.3 Which of the following would be the BEST process for the technician to follow when beginning to
diagnose a unit at a customers site?
A.Check the printers error log, and then inform the primary user what the issue is.
B.Go directly to the printer and investigate any issues that are found.
C.Investigate the printers status, then ask the primary user to write down what they think is wrong.
D.Gather information from the primary user, and then evaluate the printers condition.
Answer: D

CompTIA   PD1-001 certification training   PD1-001 answers real questions   PD1-001 exam   PD1-001 original questions

NO.4 The customer has a dedicated ink jet fax machine that is used to send and receive faxes only from the
corporate office. The user complains of streaks on the received faxes while the internal self-prints are fine.
Which of the following should a technician recommend?
A.Clean the scanner glass on the distant machine.
B.Clean the scanner glass on the local machine.
C.Clean the printer head on the local machine.
D.Call the telephone company to increase the line signal level.
Answer: A

CompTIA   PD1-001   PD1-001   PD1-001   PD1-001 certification training   PD1-001

NO.5 In which of the following sections of an MFP would a technician find a Xenon Lamp?
A.The paper feed section
B.The fuser section
C.The scanner section
D.The transfer section
Answer: C

CompTIA   PD1-001 demo   PD1-001 dumps

NO.6 Which of the following components is part of the ink dispersion system?
A.Print Heads
B.Cleaning heads
C.Pickup Roller
D.Charge Assembly
Answer: A

CompTIA dumps   PD1-001   PD1-001 braindump

NO.7 A customer is concerned about excessive media jamming in their device. Which of the following is the
FIRST thing a technician should check?
A.Media feed rollers
B.Cassette drawers
C.Fusing section
D.Device log data
Answer: D

CompTIA test questions   PD1-001 study guide   PD1-001 original questions

NO.8 Which of the following is the purpose of a torque limiter in a roller?
A.To reduce wear and tear on rollers.
B.To provide resistance but still allow some slippage.
C.To limit the amount of movement by media.
D.To make it easier to replace rollers.
Answer: B

CompTIA test answers   PD1-001   PD1-001 test   PD1-001

NO.9 A technician is troubleshooting a network connectivity issue on a MFD and would like to eliminate the
possibility of another device on the network having the same IP address. The technician should:
A.disconnect the MFD and ping the IP address.
B.disconnect the MFD and ping the subnet mask.
C.disconnect the MFD and ping the loopback address.
D.run the ipconfig command from the command prompt.
Answer: A

CompTIA exam dumps   PD1-001   PD1-001   PD1-001   PD1-001

NO.10 When is it advisable to dump the waste toner from a technicians service vacuum?
A.When it is full.
B.It is not recommended.
C.Before performing preventative maintenance.
D.After each call.
Answer: B

CompTIA   PD1-001 test questions   PD1-001 certification   PD1-001   PD1-001 exam

NO.11 A polygon mirror is part of which of the following assemblies?
A.Laser unit
B.Developer unit
C.Charge assembly
D.Fuser assembly
Answer: A

CompTIA   PD1-001 study guide   PD1-001 certification

NO.12 A customer has installed a new computer on their network. They can print to the printer but the option
for duplex printing is not available. All other computers have the option. Which of the following is the
cause of the problem?
A.The new computer is printing to the wrong IP address.
B.The new computer is using the wrong protocol.
C.The driver port is not setup correctly.
D.The option has not been selected on the driver.
Answer: D

CompTIA pdf   PD1-001 exam prep   PD1-001   PD1-001 braindump   PD1-001

NO.13 Which of the following is a reason black toner is used in color printers?
A.It decreases the print speed in color laser printers.
B.It prevents moir patterns when printing color photographs.
C.It reduces the cost per page when printing gray scale documents.
D.It makes the color toner resistant to smudging when wet.
Answer: C

CompTIA   PD1-001   PD1-001   PD1-001 test answers

NO.14 Using the CMYK color model, the color purple is produced by combining cyan and which other color?
A.Green
B.Magenta
C.Yellow
D.Black
Answer: B

CompTIA   PD1-001   PD1-001 dumps   PD1-001

NO.15 Which of the following stages in the laser print process attracts toner to the latent image on the
photoconductor?
A.Writing
B.Fusing
C.Development
D.Transfer
Answer: C

CompTIA original questions   PD1-001   PD1-001 certification training   PD1-001   PD1-001 questions

NO.16 During the photoconductor preparation step, residual charge can be removed by which of the
following? (Select TWO).
A.Pressure
B.Oil
C.Light
D.Gravity
E.Electrical Charge
Answer: CE

CompTIA   PD1-001   PD1-001 answers real questions   PD1-001   PD1-001   PD1-001 pdf

NO.17 The polygon mirror is located in which of the following components?
A.Developer unit
B.Scanner unit
C.Fuser unit
D.Laser unit
Answer: D

CompTIA   PD1-001   PD1-001   PD1-001

NO.18 Which of the following utilities could be used to determine a subnet mask?
A.PING
B.NSLOOKUP
C.TRACERT
D.IPCONFIG
Answer: D

CompTIA questions   PD1-001   PD1-001   PD1-001 answers real questions

NO.19 Which of the following functions is associated with the developer unit?
A.Supplies toner to the photoconductor
B.Charges the surface of the photoconductor
C.Writes the latent image on the photoconductor
D.Cleans the photoconductor
Answer: A

CompTIA exam simulations   PD1-001   PD1-001   PD1-001 demo

NO.20 An encoder sensor typically detects:
A.paper position.
B.shaft rotation.
C.magnetic flux.
D.laser beam strength.
Answer: B

CompTIA pdf   PD1-001   PD1-001   PD1-001

IT-Tests.com offer the latest 200-120 Questions & Answers and high-quality 644-068 PDF Practice Test. Our ACMA_6.1 VCE testing engine and BAS-004 study guide can help you pass the real exam. High-quality 648-238 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/PD1-001.html