2014年2月20日星期四

Nortel 920-159認定試験に関連する最高の参考資料を薦める

弊社のIT業で経験豊富な専門家たちが正確で、合理的なNortel 920-159認証問題集を作り上げました。 弊社の勉強の商品を選んで、多くの時間とエネルギーを節約こともできます。

我々はNortelの920-159試験問題と解答また試験シミュレータを最初に提供し始めたとき、私達が評判を取ることを夢にも思わなかった。我々が今行っている保証は私たちが信じられないほどのフォームです。Nortelの920-159試験はJPexamの保証を検証することができ、100パーセントの合格率に達することができます。

Nortelの920-159認定試験は競争が激しい今のIT業界中でいよいよ人気があって、受験者が増え一方で難度が低くなくて結局専門知識と情報技術能力の要求が高い試験なので、普通の人がNortel認証試験に合格するのが必要な時間とエネルギーをかからなければなりません。

Nortelの920-159認定試験はIT業界の中でとても普遍的な試験になります。試験の準備は時間とエネルギーがかかります。時は金なり社会に時間を無駄しないようによいツルを探し出されるのはみんなの希望です。JPexamのNortelの920-159認証試験の問題集は君の20時間だけかかりますよ。

試験番号:920-159問題集
試験科目:Ncss callpilot 2.x/3.0
最近更新時間:2014-02-20
問題と解答:全140問
100%の返金保証。1年間の無料アップデート。

君はほかのサイトや書籍もブラウズ するがもしれませんが、弊社の関連の学習資料と比較してからJPexamの商品の範囲が広くてまたネット上でダウンロードを発見してしまいました。JPexamだけ全面と高品質の問題集があるのではJPexamの専門家チームが彼らの長年のIT知識と豊富な経験で研究してしました。そして、JPexamに多くの受験生の歓迎されます。

JPexam提供した商品の品質はとても良くて、しかも更新のスピードももっともはやくて、もし君はNortelの920-159の認証試験に関する学習資料をしっかり勉強して、成功することも簡単になります。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/920-159_exam.html

NO.1 .Exhibit
Prior to installing a CallPilot 3.0 system, you review, the Configuration Wizard worksheet.
The customer has provided category 5 cable connections to their corporate LAN for the
Switch Ethernet connection, the CallPilot Server Customer LAN (CLAN) Ethernet
connection, and the CallPilot Server Embedded LAN (ELAN) Ethernet connection. The
network address information (shown in the exhibit) for the Switch IP address, the CallPilot
server ELAN IP address, and the CallPilot Server CLAN IP address integrate with the
customer's internal network. What action would you take?
A. Proceed with the installation using the category 5 cable connections, IP addresses and Subnet
mask provided by the customer.
B. Proceed with the installation but do not use the category 5 cable connections provided by the
customer for the Switch Ethernet connection and the CallPilot server ELAN Ethernet
connection. Use a separate category 5 cable that connects directly from the switch to the ELAN
network interface connector on the server.
C. Inform the customer that IP address beginning with 192.168 are private address and if used
the ELAN will not be able to be connected to the internet.
D. Inform the customer that the ELAN must be on a separate IP network isolated from the
CLAN. Recommend that they use a dedicated hub that can either be supplied by Nortel Network
or a third party for the ELAN and recommend different IP addresses for switch and the ELAN
NIC.
Answer: D

Nortel認定証   920-159過去問   920-159認証試験

NO.2 When installing a 96-chabbel 3.0 system using a 1003rp server and a CS 1000 system, how
would you install the Nortel Network software feature key adapter?
A. The Nortel Networks software feature Key adapter is installed in its bracket on the
motherboard in the 102rp server.
B. The Nortel Networks software feature Key adapter is installed in the COM1 serial port
connector on the rear of the 1002rp server.
C. The Nortel Networks software feature Key adapter is installed in the COM1 serial port
connector on the rear of the 1002rp server.
D. The Nortel Networks software feature Key adapter is installed in the Parallel port connector
LPT1 on the rear of the 1002rp server.
Answer: D

Nortel   920-159   920-159過去問

NO.3 When installing a 40-channel 3.0 system using a 201i server and a Meridian 1 Option 11C
mini switch, how should you set the SCSI ID on the Tandberg SLR5 tape drive
(NTRH9038)?
A. Rotate the dial on the SCIS ID rotary switch unit the arrow points to 3.
B. Use the blade of a screwdriver to press either the plus (+) or minus (? Button the SCSI ID
switch to set the SCIS ID to 5.
C. Use the blade of a screwdriver to set DIP switches as follows.
1=ON, 2=off, 3=Off, 4=Off, 5=Off
D. The SCSI ID for the Tandberg SLR5 tape drive (NTRH9038) is set when you run the
Configuration Wizard after you install the CallPilot system.
Answer: B

Nortel問題集   920-159過去問   920-159   920-159過去問   920-159

NO.4 .When provisioning the Embedded Local Area Network (ELAN) on a CS 1000 system for a
site with a CallPilot 3.0 system with 96 DSO channels, what number should you set the
maximum number of call registers for CSL input (CSQI in LD 17)?
A. 20
B. 96
C. 192
D. 255
Answer: C

Nortel   920-159過去問   920-159問題集   920-159認定試験   920-159

NO.5 .XXXX .com has a CallPilot 3.0 configuration connected to a Meridian 1. the CallPilot
platform connect to the network loops in the IPE shelf through MGate cards. The MGate
cards plug into the Meridian 1 IPE shelf. Which three platform types connect using the
Mgate card? (Choose three.0?
A. 200i
B. 201i
C. 702t
D. 1001ro
E. 1002rp
Answer: A.B.C

NO.6 A site has a CallPilot 3.0 server. Which two administrative functions support the
web-based CallPilot Manager administrative application? (Choose two.)
A. Managing system configuration and backups
B. Creating application with Application Builder
C. Managing mailbox Users, groups, and permissions
D. Managing CallPilot Simple network Maintenance Protocol (SNMP) traps
Answer: A.C

NO.7 .When installing a 40-channel CallPilot 3.0 system using a 201i server and a CS 1000
system, how do you connect the SCSI connection to the server?
A. The SCSI connection to the 201i server is made with the low profiles right-angle SCIS
connector on the SCIS connector on the 201i server faceplate.
B. NTRH3502SCSI cable attached to the SCSI connection to the 201i server is made with the
CD-ROM drive SCSI cable NTRH1408 attached from the SCIS connector on the 201i server
faceplate to the SCSI adapter A0763912 on the CD-ROM drive
C. NTRH3502SCSI cable attached to the SCSI connection to the 201i server is made via the
backplane connector in the Media Gateway or Media Gateway Expansion with the multi I/O
cable (NTRH0912) to the next drive in the SCIS chain.
D. NTRH3502SCSI cable attached to the SCSI connection to the 201i server is madewith the
intermediate SCIS cable NTRH1408 that connect from the SCIS connector on the 201i server
faceplate to the I/O panel connector and the NTRH410 SCSIcable that connect from the I/O
panel connector to the next device in the SCSI chain.
Answer: A

Nortel   920-159認定証   920-159認定資格   920-159練習問題

NO.8 Which three CallPilot features are supported by Business Communication Manager
(BCM) 3.0? (Choose three.)
A. ability to annotate faxes
B. ability to save voice messages
C. ability to reject passwords (such as 888888)
D. ability to set message sensitivity to urgent or Normal
Answer: A.B.D

NO.9 You are installing a CallPilot 3.0 system with 32 Voice channels, 8 Fax channels, and 4
ASR (automated speech recognition) Cannels using a CallPilot 702t server and a Meridian
1 IP Enable (IE) Option 61C switch. How many NTRB18CA MGate cards must be
installed in the switch to support this configuration?
A. 1
B. 2
C. 3
D. 4
Answer: B

Nortel   920-159練習問題   920-159   920-159認証試験   920-159練習問題   920-159認定証

NO.10 A site has a CallPilot server interworking with a Symposium server. Where are the
applications (announcement service, menus, etc.) stored to support Symposium to CallPilot
integration?
A. in a folder
B. in a mailbox
C. on the C drive
D. by a backup file
Answer: A

Nortel練習問題   920-159   920-159   920-159過去問   920-159認定証   920-159

JPexamは最新のNS0-145問題集と高品質のC_TADM51_70問題と回答を提供します。JPexamの000-N55 VCEテストエンジンとHP3-C33試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のLOT-412 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/920-159_exam.html

没有评论:

发表评论