000-994認定試験の準備を効率的にするために、どんなツールが利用に値するものかわかっていますか。私は教えてあげますよ。JPexamの000-994問題集が一番頼もしい資料です。この問題集がIT業界のエリートに研究し出されたもので、素晴らしい練習資料です。この問題集は的中率が高くて、合格率が100％に達するのです。それはIT専門家達は出題のポイントをよく掴むことができて、実際試験に出題される可能性があるすべての問題を問題集に含めることができますから。不思議だと思っていますか。しかし、これは本当のことですよ。
いつもあなたに最高の000-994認定試験に関連する試験参考書を与えられるために、JPexamは常に問題集の質を改善し、ずっと最新の試験のシラバスに応じて問題集を更新しています。現在の市場では、JPexamはあなたの最もよい選択です。長い間にわたって、JPexamは多くの受験生に認可されました。私を信じていないなら、周りの人々に聞いてみてもいいです。JPexamの試験問題集を利用したことがある人がきっといますから。JPexamは最優秀な試験000-994参考書を提供してあなたを試験に合格させることを保証します。
JPexamが提供した問題集を使用してIT業界の頂点の第一歩としてとても重要な地位になります。君の夢は1歩更に近くなります。資料を提供するだけでなく、IBMの000-994試験も一年の無料アップデートになっています。
試験番号：000-994問題集
試験科目：IBM WebSphere MQ V6.0,System Administration
最近更新時間：2014-03-17
問題と解答：全104問
100％の返金保証。1年間の無料アップデート。
JPexamは君の試験に合格させるだけでなく本当の知識を学ばれます。JPexamはあなたが100% で000-994試験に合格させるの保証することができてまたあなたのために一年の無料の試験の練習問題と解答の更新サービス提供して、もし試験に失敗したら、弊社はすぐ全額で返金を保証いたします。
中国でこのような諺があります。天がその人に大任を降さんとする時、必ず先ず困窮の中におきてその心志を苦しめ、その筋骨を労し、その体膚を餓やし、その身を貧困へと貶めるのである。この話は現在でも真です。しかし、成功には方法がありますよ。正確な選択をしたら、そんなに苦労しなくても成功することもできます。JPexamのIBMの000-994試験トレーニング資料はIT職員を対象とした特別に作成されたものですから、IT職員としてのあなたが首尾よく試験に合格することを助けます。もしあなたは試験に準備するために知識を詰め込み勉強していれば、間違い方法を選びましたよ。こうやってすれば、時間とエネルギーを無駄にするだけでなく、失敗になるかもしれません。でも、今方法を変えるチャンスがあります。早くJPexamのIBMの000-994試験トレーニング資料を買いに行きましょう。その資料を手に入れたら、異なる人生を取ることができます。運命は自分の手にあることを忘れないでください。
IT 職員のそれぞれは昇進または高給のために頑張っています。これも現代社会が圧力に満ちている一つの反映です。そのためにIBMの000-994認定試験に受かる必要があります。適当なトレーニング資料を選んだらこの試験はそんなに難しくなくなります。JPexamのIBMの000-994試験トレーニング資料は最高のトレーニング資料で、あなたの全てのニーズを満たすことができますから、速く行動しましょう。
現在のこの社会の中で、優秀な人材が揃って、IT人材も多く、競争もとてもはげしくて、だから多くのIT者はIT認証試験に参加してIT業界での地位のために奮闘して、000-994試験はIBMの一つ重要な認証試験で、多くの人がIBM認証されたくて試験に合格しなければなりません。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/000-994_exam.html
NO.1 The message flow performance between two Queue Managers is slower than expected. An
application is using a MQPUT call with parameter "MQPER_PERSISTENCE_AS_Q_DEF". The
messages are put onto a local Remote Queue. The properties are detailed below. The Application
messages are not required to survive system failures or restart of the queue managers. dis
qremote('MyAppQueue') all AMQ8409: Display Queue details. QUEUE(MyAppQueue)
TYPE(QREMOTE) ALTDATE(2005-09-21) ALTTIME(13.10.46) CLUSNL( ) CLUSTER( ) CLWLPRTY(3)
CLWLRANK(3) DEFBIND(OPEN) DEFPRTY(5) DEFPSIST(YES) DESCR( My Application Message
Queue on Remote Server) PUT(ENABLED) RQMNAME( ) RNAME(MyAppQueue) SCOPE(QMGR)
XMITQ(QM2) What is the best MQSC command the WebSphere MQ Administrator can use to
improve the message flow performance between the two Queue Managers?
A.No command is valid, as this is an application tuning issue.
B.ALTER QREMOTE('MyAppQueue') CLWLRANK(9)
C.ALTER QREMOTE('MyAppQueue') DEFPRTY(9)
D.ALTER QREMOTE('MyAppQueue') DEFPSIST(NO)
Correct:D
IBM 000-994練習問題 000-994
NO.2 Within a WebSphere MQ based application, all of the following types of reports are available
EXCEPT:
A.Confirm on Arrival (COA)
B.Confirm on Delivery (COD)
C.Receiving Application Processing (RAP)
D.Expiry
Correct:C
IBM 000-994練習問題 000-994
NO.3 Which commands would disable the Object Authority Manager on AIX for Queue Manager
"BROADWAY"?
A.endmqm -c BROADWAY; export MQSNOAUT=yes; strmqm BROADWAY;
B.strmqm BROADWAY; export MQSNOAUT=yes
C.export MQSNOAUT=yes; crtmqm BROADWAY
D.export MQSNOAUT=yes; strmqm BROADWAY
Correct:C
IBM 000-994練習問題 000-994
NO.4 An AIX WebSphere MQ queue manager 'QM1' owns a channel 'QM1.TO.QM2'. The parameters of
the channel are as follows: CHANNEL(QM1.TO.QM2) CHLTYPE(SDR) ALTDATE(2005-09-26)
ALTTIME(16.51.53) BATCHHB(0) BATCHINT(0) BATCHSZ(50) COMPHDR(NONE) COMPMSG(NONE)
CONNAME(QM2) CONVERT(NO) DESCR(Sender Channel to QM2) DISCINT(6000) HBINT(300)
KAINT(AUTO) LOCLADDR( ) LONGRTY(999999999) LONGTMR(1200) MAXMSGL(4194304)
MCANAME( ) MCATYPE(PROCESS) MCAUSER( ) MODENAME( ) MONCHL(QMGR) MSGDATA( )
MSGEXIT( ) NPMSPEED(FAST) PASSWORD( ) RCVDATA( ) RCVEXIT( ) SCYDATA( )
SCYEXIT(svr_sec_exit2(ChannelExit))) SENDDATA( ) SENDEXIT( ) SEQWRAP(999999999)
SHORTRTY(10) SHORTTMR(60) SSLCIPH( ) SSLPEER( ) STATCHL(QMGR) TPNAME( )
TRPTYPE(TCP) USERID( ) XMITQ(QM2) The remote server has just been upgraded and the Queue
Manager rebuilt. Unfortunately, all of the WebSphere MQ objects where only defined with the
default parameters. The 'QM1.TO.QM2' channel is started and its status is "RETRYING". Which of
the following actions is most likely to correct the problem with the channel pair?
A.Set the receiver channel's message channel agent user attribute correctly
B.Set the receiver channel's CipherSpecs attribute correctly
C.Set the receiver channel's Security Exit attribute correctlyC.Set the receiver channel's Security Exit
attribute correctlyC.Set the receiver channel's Security Exit attribute correctly
D.Clear all messages from the QM2 Transmission QueueD.Clear all messages from the QM2
Transmission QueueD.Clear all messages from the QM2 Transmission Queue
Correct:C
IBM 000-994練習問題 000-994
NO.5 What service object can utilize the MQSC script command DISPLAY SVSTATUS to display the
status of running service objects?
A.COMMAND object
B.LISTENER object
C.SERVER object
D.QUEUE object
Correct:C
IBM 000-994練習問題 000-994
NO.6 A WebSphere MQ System Administrator enters this MQSC command "dis
chstatus(QM1.TO.QM2)" on a UNIX Queue Manager and receives this output. AMQ8417: Display
Channel Status details. CHANNEL(QM1.TO.QM2) CHLTYPE(SDR) CONNAME(QM2) CURRENT
RQMNAME( ) STATUS(RETRYING) SUBSTATE( ) XMITQ(QM2) Administrator needs to locate more
detailed information on the reason for the retrying channel status? Where can this information be
found?
A.In the system error log directory
B.In the log file AMQERR04.LOG
C.In the log file MQERRLG1
D.In the appropriate queue manager's errors log files
Correct:D
IBM 000-994練習問題 000-994
NO.7 A company has a Queue Manager configured with Linear Logging enabled. The log files are
mounted on a separate disk, the old log files are regularly archived to ensure sufficient disk space.
What procedure should the WebSphere MQ Administrator follow after altering an empty local
queue to ensure this change is not lost by a media failure before the Queue Manager is next
restarted?
A.Recreate the Queue Manager to use Circular Logging.
B.Increase the frequency of the regularly archiving of the log files.
C.Media images are recorded automatically by the Queue Manager, the WebSphere MQ System
Administer does not need a procedure.
D.Use the control command to record the new local queue's definition.
Correct:D
IBM 000-994練習問題 000-994
NO.8 Which parameter setting on the server connection channel requires a WebSphere MQ Client
application to have personal digital certificates?
A.CONVERT(YES)
B.SECURITY(YES)
C.SSLCAUTH(YES)
D.SSLCAUTH(REQUIRED)
Correct:D
IBM 000-994練習問題 000-994
NO.9 A Unix Server has just restarted after a media failure. When the queue manager startup
command was entered, the error message "QUEUE MANAGER UNAVAILABLE" was returned.
Which of the following is the most likely cause of the problem?
A.The mqs.ini does not reference the queue manager with the correct information for locating its files.
B.During the media failure, the Queue Manager was dropped from the queue-sharing group.
C.During the media failure, the Queue Manager was suspended from processing messages.
D.The 'mqm' User Group was damaged during the media failure.
Correct:A
IBM 000-994練習問題 000-994
NO.10 A company is using only WebSphere MQ V6.0 in their complex distributed network. All
messages sent by one application are missing. The WebSphere MQ administrator suspects that
due to an application programming error, the messages are caught in an infinite loop. Which of
the following methods will best help the WebSphere MQ administrator track down the missing
messages?
A.Use Trace-route messaging
B.Enable Activity recording
C.Run the strmqtrc control command to enable tracing on all Queue Managers
D.Check all the Dead Letter Queues on all the Queue Managers
Correct:A
IBM 000-994練習問題 000-994
NO.11 What attribute is required on the ALTER CHANNEL(Channel Name) command?
A.CONNAME
B.CHLTYPE
C.TRPTYPE
D.XMITQ
Correct:B
IBM 000-994練習問題 000-994
NO.12 Which two of the following are services provided by the SSL features of WebSphere MQ?
A.Confidentiality
B.Application-Level Security
C.Message Compression
D.Data Recovery
E.Data Integrity
Correct:A E
IBM 000-994練習問題 000-994
NO.13 An application development team is coding a tool to send PCF commands to a WebSphere MQ
Queue Manager on HP-UX . The new tool is to administer WebSphere MQ, but the application
developers do not want to write PCF messages and require an easy method of handling error
conditions. What is the best IBM provided application programming interface called to perform
this function?
A.WebSphere MQ Administration Interface
B.Message Queuing Interface
C.Application Messaging Interface
D.PCF Programming Interface
Correct:A
IBM 000-994練習問題 000-994
NO.14 The registry entries of a Windows Queue Managers named 'QM2' have been corrupted. While
attempting to start QM2, WebSphere MQ is unable to read the "LogPath' stanza. If WebSphere MQ
is installed in the \IBM\WebSphere MQ\ directory, then in which directory will the AMQERR01.LOG
be updated as error messages are generated?
A.In the \var\mqm\qmgrs\QM2\errors subdirectory
B.In the \IBM\WebSphere MQ\qmgrs\@SYSTEM\errors subdirectory
C.In the \IBM\WebSphere MQ\errors subdirectory
D.In the \IBM\WebSphere MQ\qmgrs\QM2\errors subdirectory
Correct:C
IBM 000-994練習問題 000-994
NO.15 A trigger monitor needs to be started and stopped when the queue manager starts and ends.
Where in the WebSphere MQ Explorer V6.0 tooling can this trigger monitor service be defined?
A.On the advanced tab
B.On the listeners tab
C.On the queue manager properties
D.On the services tab
Correct:D
IBM 000-994練習問題 000-994
NO.16 What is the best way to protect WebSphere MQ message data from being read by unauthorized
parties while it travels over an unsecured network?
A.Configure the WebSphere Channels to use SSL security
B.Allow only locally binding applications instead of WebSphere MQ Clients
C.Set the "MQSNOAUT" variable to FALSE
D.WebSphere MQ data can never be read by unauthorized parties
Correct:A
IBM 000-994練習問題 000-994
NO.17 Which command will reload the copy of the key repository which is held in memory, without
restarting a channel process?
A.REFRESH SECURITY TYPE(KEY)
B.REFRESH SECURITY TYPE(SSL)
C.RESET SECURITY TYPE(KEY)
D.RESET SECURITY TYPE(SSL)
Correct:B
IBM 000-994練習問題 000-994
NO.18 A LINUX Queue Manager was in the middle of processing a large unit of work when the server's
power supply was interrupted. The power problem has been repaired and the server has restarted.
What will the WebSphere MQ System Administrator need to do to ensure any uncommitted
Persistent Messages are processed?
A.Contact the application team and ask them to resend the last batch of messages
B.Use the CHECKPT function to add or delete a record in the BSDS checkpoint queue
C.Delete the Log records written since the last checkpoint
D.Nothing, as the uncommitted persistent messages put or got in a transaction are rolled back during
restart
Correct:D
IBM 000-994練習問題 000-994
NO.19 A WebSphere MQ System Administrator desires to change the location of the log files only for
existing UNIX Queue Manger "saturn.queue.manager". The new location of the log files is to be
"/home/mqm/logs". What is the best way to accomplish this task?
A.Edit file /var/mqm/mqs.ini so "LogDefaultPath=/home/mqm/logs"
B.Edit file /var/mqm/qmgrs/saturn!queue!manager/qm.ini so "LogPath=/home/mqm/logs"
C.Issue control command "amqmdain reg saturn.queue.manager -c add -s Log -v LogPath value
=/home/mqm/logs"
D.Issue the control command "crtmqm saturn.queue.manager -ld /home/mqm/logs"
Correct:B
IBM 000-994練習問題 000-994
NO.20 What userid or group always has access to all WebSphere MQ Objects on UNIX platforms?
A.mqadmin
B.wmqadmin
C.mqm
D.root
Correct:C
IBM 000-994練習問題 000-994
JPexamは最新のC_TBIT44_73問題集と高品質のBCP-340問題と回答を提供します。JPexamの70-483 VCEテストエンジンとNS0-155試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC_FSUTIL_60 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论