MB7-516認定試験の資格を取得するのは容易ではないことは、すべてのIT職員がよくわかっています。しかし、MB7-516認定試験を受けて資格を得ることは自分の技能を高めてよりよく自分の価値を証明する良い方法ですから、選択しなければならならないです。ところで、受験生の皆さんを簡単にIT認定試験に合格させられる方法がないですか。もちろんありますよ。JPexamの問題集を利用することは正にその最良の方法です。JPexamはあなたが必要とするすべてのMB7-516参考資料を持っていますから、きっとあなたのニーズを満たすことができます。JPexamのウェブサイトに行ってもっとたくさんの情報をブラウズして、あなたがほしい試験MB7-516参考書を見つけてください。
弊社が提供した部分の資料を試用してから、決断を下ろしてください。もし弊社を選ばれば、１００％の合格率を保証でございます。
JPexamを選ぶかどうか状況があれば、弊社の無料なサンプルをダウンロードしてから、決めても大丈夫です。こうして、弊社の商品はどのくらいあなたの力になるのはよく分かっています。JPexamはMicrosoft MB7-516認証試験を助けって通じての最良の選択で、１００％のMicrosoft MB7-516認証試験合格率のはJPexam最高の保証でございます。君が選んだのはJPexam、成功を選択したのに等しいです。
試験番号：MB7-516問題集
試験科目：NAV 5.0 C/SIDE Solution Development
最近更新時間：2014-03-18
問題と解答：全90問
100％の返金保証。1年間の無料アップデート。
JPexamのMB7-516問題集はあなたが信じられないほどの的中率を持っています。この問題集は実際試験に出る可能性があるすべての問題を含んでいます。したがって、この問題集をまじめに勉強する限り、試験に合格することが朝飯前のことになることができます。Microsoft試験の重要なの一環として、MB7-516認定試験はあなたに大きな恩恵を与えることができます。ですから、あなたを楽に試験に合格させる機会を逃してはいけません。JPexamは試験に失敗した場合は全額返金を約束しますから、MB7-516試験に合格することができるように、はやくJPexamのウェブサイトに行ってもっと詳細な情報を読んでください。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/MB7-516_exam.html
NO.1 When upgrading MenuSuites, if a menu item has been added to a menu group that is no longer a part
of the upgraded MenuSuite, what happens to the menu item?
A. The menu item is deleted.
B. The menu item is placed in a Lost Items group at the bottom of the menu tree.
C. The menu item is placed in a Deleted Items group.
D. The menu item is highlighted at the top of the menu tree.
Answer: B
Microsoft MB7-516認証試験 MB7-516 MB7-516問題集 MB7-516
NO.2 Which of the following is true regarding NODBC and multi-language capability?
A. NODBC is not multi-language enabled.
B. Only the Table Name is multi-language enabled.
C. The Table Name, Field Name, and OptionString values are multi-language enabled.
D. Only the data is multi-language enabled.
Answer: C
Microsoft過去問 MB7-516認定試験 MB7-516 MB7-516
NO.3 Which of the following commands is best to use in C/AL to change a closing date to a normal date?
A. NORMALIZEDATE
B. COMPRESSDATE
C. WORKDATE
D. NORMALDATE
Answer: D
Microsoft参考書 MB7-516過去問 MB7-516過去問 MB7-516
NO.4 What can be determined from viewing the following C/AL command?
CustProcessCode.Update(Customer);
A. A variable has been declared with the name CustProcessCode, the variable refers to a complex data
type, and the object referred to contains a function named Update.
B. The Customer table will be updated if the command is executed.
C. The Customer table has a function named Update.
D. A variable named CustProcessCode has been declared with a subtype of Codeunit, and has a function
that updates the Customer table.
Answer: A
Microsoft認定試験 MB7-516 MB7-516参考書
NO.5 Which of the following is not true regarding Complex Data Types?
A. Complex data types have properties.
B. Complex data types have methods.
C. Addition or subtraction functions can be performed on complex data types.
D. Complex data types must be declared as either a global or local variable.
Answer: C
Microsoft過去問 MB7-516 MB7-516練習問題 MB7-516認定証 MB7-516認定試験 MB7-516
NO.6 You are writing code in C/SIDE. Assuming that you are in a transaction, which of the following ends a
transaction?
A. EndTrans
B. Commit
C. StartTrans
D. PostTrans
Answer: B
Microsoft MB7-516 MB7-516 MB7-516問題集
NO.7 Which statement best describes how MenuSuite object changes are stored?
A. Each change is stored as a complete list of MenuSuite menus and items and replaces the previous
level.
B. Changes are stored as the difference between the previous MenuSuite level and the current one.
C. Only one MenuSuite level is stored which consists of all menu items.
D. MenuSuite changes are not stored.
Answer: B
Microsoft MB7-516参考書 MB7-516過去問 MB7-516
NO.8 Which of the following is TRUE regarding exporting of MenuSuite objects?
A. MenuSuite objects can be exported in either MenuSuite (mns) or text (txt) format.
B. MenuSuite objects can only be exported in text (txt) format.
C. MenuSuite objects cannot be exported.
D. MenuSuite objects can be exported in either object (fob) or text (txt) format.
Answer: D
Microsoft認定試験 MB7-516問題集 MB7-516
NO.9 Which of the following is a valid FILE function?
A. TRUNCATE
B. BINARYMODE
C. EXISTS
D. WRITELINE
Answer: C
Microsoft MB7-516認定資格 MB7-516練習問題 MB7-516 MB7-516
NO.10 Which of the following controls cannot be contained in a subform?
A. Picturebox
B. Subform
C. Tablebox
D. Tab Control
Answer: B
Microsoft MB7-516 MB7-516 MB7-516
NO.11 Under which circumstances is it possible to run a report in a modal fashion while in the middle of a
Transaction?
A. If the Request Form is shown modally before the report
B. If the report prepopulates all the needed information on the Request Form before it is displayed
C. If the Request Form is not shown
D. If the report has already been run once and the request form was properly filled in
Answer: C
Microsoft認定証 MB7-516 MB7-516過去問 MB7-516問題集 MB7-516 MB7-516
NO.12 What is the result of executing the following commands, where Number is a variable declared of the
datatype Record
and subtype Integer? Number.Number := 10; Number.MODIFY;
A. The Number field of the current record stored in the Number variable will be changed to 10 in the
database.
B. A compile error will occur before the commands can be executed.
C. A run-time error will occur.
D. Record number 10 in the Integer table will be deleted and a new record inserted.
Answer: C
Microsoft MB7-516 MB7-516
NO.13 Which of the following is not a valid reason to apply Grouping in a Microsoft Dynamics NAV report?
A. To cause the report to print a new page for each Salesperson when printing a list of Customers
B. To print a subtotal of the Balance field for each Salesperson when printing a list of Customers C. To
cause two or more Customer reports to print simultaneously for each Salesperson
D. To cause the report to print a sub-heading each time the Salesperson code changes when printing a
list of Customers
Answer: C
Microsoft MB7-516 MB7-516認定証 MB7-516 MB7-516認定資格
NO.14 When must the SourceExpr property be populated for a Label control?
A. When the Label control is bound to a Textbox control
B. Never, there is no such property for Label controls
C. Only when the control is placed on an unbound form
D. When the ParentControl property of the Label control is set to the Source Table
Answer: B
Microsoft MB7-516問題集 MB7-516 MB7-516認定資格
NO.15 Form A calls a function in a Single Instance Codeunit and populates a global text variable with the
value "Red." Then, Form B calls the same function and populates the same text variable with the value
"Blue." Which of the following is TRUE if Form A were to then call another function in the same Single
Instance Codeunit and retrieve the same global text variable?
A. The value of the text variable is "Red."
B. The value of the text variable is "Blue."
C. The text variable contains a null value.
D. A LOCKTABLE error occurs.
Answer: B
Microsoft認証試験 MB7-516 MB7-516認定資格
NO.16 Which of the following is not a valid target for the WRITELINE method of an OutStream type variable?
A. BLOB
B. File
C. Report
D. Automation
Answer: C
Microsoft MB7-516問題集 MB7-516 MB7-516練習問題
NO.17 Which property on a Subform control determine the form to be displayed?
A. FormID
B. SourceDataLink
C. SubFormID
D. SubFormLink
Answer: C
Microsoft MB7-516 MB7-516認定資格 MB7-516 MB7-516
NO.18 How can an element of an object be addressed in code?
A. Through an instance of the class definition
B. Through the normal syntax of a structured language
C. By using the dot operator
D. By using a pointer reference
Answer: C
Microsoft認定資格 MB7-516 MB7-516 MB7-516
NO.19 In a Function, when a parameter is specified as Var, it means:
A. The parameter is passed as a variant.
B. The parameter is passed by value rather than reference.
C. The parameter has variable lengths.
D. The parameter is passed by reference rather than value.
Answer: D
Microsoft参考書 MB7-516 MB7-516認定資格 MB7-516認定証
NO.20 Select the SETFILTER line that is equivalent to: Customer.SETRANGE('No.', LowValue, HighValue);
A. Customer.SETFILTER('No.', '%1|%2', LowValue, HighValue);
B. Customer.SETFILTER('No.', LowValue, HighValue);
C. Customer.SETFILTER('No.', '%1..%2', LowValue, HighValue);
D. Customer.SETFILTER('No.', LowValue..HighValue);
Answer: C
Microsoft過去問 MB7-516認定証 MB7-516 MB7-516 MB7-516練習問題 MB7-516
JPexamは最新のC_TBIT44_731問題集と高品質の700-410問題と回答を提供します。JPexamの000-120 VCEテストエンジンと1z0-465試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC_TADM51_70 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论