人はそれぞれの夢を持っています。あなたの夢は何でしょうか。昇進ですか。あるいは高給ですか。私の夢はEMCのE22-275認定試験に受かることです。この認証の証明書を持っていたら、全ての難問は解決できるようになりました。この試験に受かるのは難しいですが、大丈夫です。私はJPexamのEMCのE22-275試験トレーニング資料を選びましたから。私が自分の夢を実現することを助けられますから。あなたもITに関する夢を持っていたら、速くJPexamのEMCのE22-275試験トレーニング資料を選んでその夢を実現しましょう。JPexamは絶対信頼できるサイトです。
JPexamのEMCのE22-275試験資料を買いたかったら、弊社は最も良いサービスと最も高品質な製品を提供します。弊社の認証試験のソフトウェアはもうベンダーとサードパーティーの認可を取り、大量なIT技術専門家たちがいますから、お客さんのニーズを答えるためにアウトラインに基づいてシリーズの製品を開発して、お客様の大量の要求を満たすことを保障します。EMCのE22-275試験資料は最高の専門技術の内容を持っていますから、関連する知識の専門家と学者は研究する材料として利用することができます。弊社が提供した製品は一部の無料試用資料がありますから、購入する前にあなたのテストの質と適用性を保証します。
JPexamはきみのIT夢に向かって力になりますよ。EMCのE22-275の認証そんなに人気があって、JPexamも君の試験に合格するために全力で助けてあげて、またあなたを一年の無料なサービスの更新を提供します。明日の成功のためにJPexamを選らばましょう。
親愛なる受験生の皆様、何かEMCのE22-275試験のトレーニング授業に加入したいのですか。実は措置を取ったら一回で試験に合格することができます。JPexamのEMCのE22-275試験のトレーニング資料はとても良い選択なんですよ。JPexamの仮想ネットワークトレーニングと授業は大量の問題集に含まれていますから、ぜひあなたが気楽に試験に合格することを約束します。
JPexamの経験豊富な専門家チームはEMCのE22-275認定試験に向かって専門性の問題集を作って、とても受験生に合っています。JPexamの商品はIT業界中で高品質で低価格で君の試験のために専門に研究したものでございます。
試験番号：E22-275問題集
試験科目：recoverpoint backup and recovery specialist exam
最近更新時間：2014-02-10
問題と解答：全126問
100％の返金保証。1年間の無料アップデート。
購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/E22-275_exam.html
NO.1 You want to upgrade a RecoverPoint environment using Deployment Manager (DM). As a prerequisite
to continuing with the upgrade, which TCP port needs to be open between the management station where
the DM is installed and the RPA management IP addresses?
A. 22
B. 23
C. 80
D. 161
Answer: A
EMC認証試験 E22-275 E22-275
NO.2 In a Brocade splitter implementation using frame redirect mode, how many DPCs are available?
A. 1
B. 2
C. 3
D. 4
Answer: B
EMC認定資格 E22-275 E22-275 E22-275
NO.3 What is the blade processor in a Brocade splitter?
A. A separate command shell which loads and operates the splitter
B. A special slot in a Brocade director with intelligent switch capabilities
C. A daughterboard in the switch to allow RecoverPoint integration
D. A dedicated memory space in the RPA to integrate with a Brocade switch
Answer: A
EMC E22-275認定資格 E22-275練習問題
NO.4 You have just enabled the zones and re-enabled the configuration on a AP-7600B switch. Where would
you run the thirdparty/recoverpoint/install/kdrv status command to verify the status of the kdriver on the
switch?
A. As root in the blade processor
B. As admin in the blade processor
C. As root in the control processor
D. As admin in the control processor
Answer: A
EMC認定試験 E22-275認定資格 E22-275認定証 E22-275認定資格
NO.5 Refer to the Exhibit.
You are troubleshooting High Load activities on two consistency groups (CGs). As part of your tasks, you
have run the data collect and are reviewing the system log files for the CGs.
What is a possible root cause for this High Load period?
A. The preferred RPA has lost communications with the remote RPA and caused a failover of the CG
within the cluster.
B. The local site has lost connectivity to the remote site and caused the CG to go into Marking mode.
C. There is no journal assigned to the CG in the local site, causing latency build up during data transfer.
D. The copies are cross-connected between the sites causing additional I/O to flood the connectivity
between the sites.
Answer: A
EMC E22-275 E22-275認定証
NO.6 Refer to the Exhibit.
You are troubleshooting a RecoverPoint issue where consistency groups, using a kdriver splitter, have
stopped working. While analyzing the problem, you ran detect Fibre Channel targets from the SAN
Diagnostics menu. What does this output tell you that relates to the problem in the environment?
A. RPA is not zoned to any hosts
B. All RPA HBA ports are being used as targets
C. Even and odd ports should not see the same targets
D. Ports 0 and 3 should not be connected to the same fabric
Answer: A
EMC E22-275 E22-275 E22-275 E22-275
NO.7 You have installed the Solaris kdriver on a host. When validating the installation, you find that the
splitter is not seen by the RecoverPoint Management Application. Other splitters appear correctly in the
GUI.
Which step should you take on the host to discover the splitter by the GUI?
A. Run the /etc/init.d/kdrv start command
B. Run the rc.kdrv configure command and restart the kdriver
C. Run the rc.kdrv start command and reboot the host
D. Run the devfsadm command
Answer: A
EMC認証試験 E22-275練習問題 E22-275 E22-275認定証
NO.8 You are finalizing a RecoverPoint setup that makes use of the Symmetrix VMAXe splitter. You are about
to create the masking view for the RecoverPoint cluster initiator group.
Which setting must be enabled to allow the RPAs to write to the replica volumes when image access is
disabled?
A. Write Protect Bypass
B. Always Push Old
C. Backlog Mirroring
D. Device Tagging
Answer: A
EMC E22-275過去問 E22-275認定資格 E22-275認定証
NO.9 You have a customer with an EMC VNX array at each site that uses both block and file storage. They
would like to use the VNX splitter to replicate all their iSCSI data LUNs.
How would you configure RecoverPoint?
A. Use the Consistency Group Wizard to create a CG
B. Use Installation Manager and "Expose" all iSCSI LUNs
C. Check the "Enable iSCSI Replication" option in the CG profile
D. Replication of iSCSI LUNs are not supported at this time
Answer: A
EMC認定資格 E22-275問題集 E22-275認証試験 E22-275
NO.10 A customer wants to add a new RecoverPoint UserID. Which role must their UserID belong to in order to
manage user settings?
A. Security
B. Admin
C. Boxmgmt
D. Monitor
Answer: A
EMC認定証 E22-275 E22-275参考書
NO.11 A customer has a RecoverPoint environment defined with two RPAs at each site. They created two
consistency groups (CGs), each one in a different RPA. Their business requires that both consistency
groups act as a single unit as they are dependent on one another.
How can they achieve this requirement?
A. Create one Group Set for both CGs
B. Enable the RecoverPoint Snapshot Consolidation feature
C. Select the same primary RPA for both CGs
D. Configure distributed consistency groups
Answer: A
EMC認定資格 E22-275認定試験 E22-275認定資格 E22-275 E22-275練習問題
NO.12 You have finished deploying SANTap in a RecoverPoint CRR environment. At Site 2 everything looks
fine. However, at Site 1 you see the following message on the RecoverPoint Management Application:
WARNING: RPA cannot access discovery AVT: 7001248288220000 ; Site1 ; RPA1 in Site1 ; Cisco -
CVT22-2109000dec3c3182
You have checked that back-end and front-end VSANs are properly configured with the correct members
in each. Which action can you take to perform a full discovery of ITLs and recreation of AVTs to fix this
issue?
A. SSH as 'admin' and run the refresh_santap_view command
B. Refresh the splitters on the RecoverPoint Management Application
C. Rescan the SAN on the RecoverPoint Management Application
D. SSH as 'admin' and run the get_santap_view command
Answer: A
EMC認証試験 E22-275 E22-275練習問題 E22-275参考書 E22-275
NO.13 Which generation of RecoverPoint Appliance hardware must be used to ensure you can use a CRR
over FC configuration?
A. Gen2 and 3 only
B. Gen2 and 4 only
C. Gen2, 3, and 4
D. Gen3 and 4 only
Answer: D
EMC認定試験 E22-275 E22-275参考書
NO.14 Which device allows the installation of a Brocade splitter into a DCX director?
A. PB-48k-18i
B. PB-48k-AP
C. PB-DCX-32P-E
D. PB-DCX-48P-8G
Answer: B
EMC過去問 E22-275問題集 E22-275 E22-275 E22-275認定証
NO.15 You are installing the RecoverPoint splitter agent on a B-Series switch. After downloading the agent
binary file to the blade processor, which step must be completed prior to successfully running the
command?
A. chmod +x agent_binary_file
B. chmod +rw agent_binary_file
C. /thirdparty/recoverpoint/install/zoning_script.sh
D. /thirdparty/recoverpoint/install/kdrv start
Answer: A
EMC参考書 E22-275 E22-275 E22-275 E22-275
NO.16 A customer is planning to deploy a 2-node RecoverPoint cluster at each data center. They will make use
of dual stack for its LAN network connection.
How many IP addresses should the customer plan for per site, including management IP addresses.?
A. 5
B. 6
C. 7
D. 8
Answer: D
EMC E22-275過去問 E22-275参考書 E22-275認定証 E22-275認証試験
NO.17 In a cascaded RecoverPoint configuration, a customer experiences a site failure at the secondary site.
What impact does this have on replication?
A.Site 1 to Site 2 replication fails Site 2 to Site 3 replication fails
B.Site 1 to Site 2 replication fails Site 2 to Site 3 replication continues
C.Site 1 to Site 2 replication fails Site 1 to Site 3 replication continues
D.Site 2 to Site 3 replication fails Site 1 to Site 3 replication continues
Answer: A
EMC認定証 E22-275 E22-275 E22-275 E22-275
NO.18 You are implementing a RecoverPoint CRR solution. The RPAs that were delivered do not have the
correct version of RecoverPoint.
What is the EMC-preferred way to load the correct software version to the RPAs?
A. Before launching Deployment Manager
B. During the Deployment Manager installation process
C. After completing the installation but before the license is installed
D. After the installation is complete
Answer: A
EMC E22-275 E22-275過去問
NO.19 You are selecting the RecoverPoint repository volume using Deployment Manager at a customer's site.
If the customer's environment makes use of an EMC VNX array, what needs to be considered?
A. Selected LUN will be formatted
B. Use of a thin provisioned LUN is supported
C. LUN is accessible by only one RPA
D. Thin LUNs have to be pre-allocated
Answer: A
EMC認証試験 E22-275 E22-275
NO.20 When installing a Microsoft Windows kdriver splitter, you receive the dialog box shown in the exhibit
and the installation stops.
What must you do to recover the installation?
A. Click Next, correct the SAN issue, and run SAN Diagnostics again
B. Click Next and Accept the SAN issue warning to continue the installation
C. Click Next to resume the installation with flags
D. Click Back to reconfigure the kdriver parameters
Answer: A
EMC E22-275 E22-275練習問題 E22-275認定証
JPexamは最新のHP2-N40問題集と高品質のIIA-CIA-Part2問題と回答を提供します。JPexamの000-657 VCEテストエンジンと642-996試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質のC_HANAIMP131 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100％保証します。試験に合格して認証資格を取るのはそのような簡単なことです。
没有评论:
发表评论