Juniper JN0-531 JN0-130 JN0-303 JN0-140認定試験に適する最高の問題集を捧げる

他の人の成功を見上げるよりも、自分の成功への努力をしたほうがよいです。JPexamのJuniperのJN0-531 JN0-130 JN0-303 JN0-140試験トレーニング資料はあなたの成功への第一歩です。この資料を持っていたら、難しいJuniperのJN0-531 JN0-130 JN0-303 JN0-140認定試験に合格することができるようになります。あなたは新しい旅を始めることができ、人生の輝かしい実績を実現することができます。

JPexamの商品は100%の合格率を保証いたします。JPexamはITに対応性研究続けて、高品質で低価格な問題集が開発いたしました。JPexamの商品の最大の特徴は20時間だけ育成課程を通して楽々に合格できます。

今の多くのIT者が参加している試験に、JuniperのJN0-531 JN0-130 JN0-303 JN0-140認定試験がとても人気がある一つとして、合格するために豊富な知識と経験が必要です。JuniperのJN0-531 JN0-130 JN0-303 JN0-140認定試験に準備する練習ツールや訓練機関に通学しなればまりませんでしょう。JPexamは君のもっともよい選択ですよ。多くIT者になりたい方にJuniperのJN0-531 JN0-130 JN0-303 JN0-140認定試験に関する問題集を準備しております。君に短い時間に大量のITの専門知識を補充させています。

アンケート調査によると、IT業種の皆さんが現在最も受験したい認定試験はJuniperのJN0-531 JN0-130 JN0-303 JN0-140試験だそうです。確かに、この試験はとても大切な試験で、公的に認可されたものです。しかも、この認定資格があなたが高い技能を身につけていることも証明できます。しかしながら、試験の大切さと同じ、この試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。JPexamはあなたに難しいJN0-531 JN0-130 JN0-303 JN0-140認定試験に合格することを助けてあげますから。

試験番号：JN0-531問題集
試験科目：FWV, Specailist(JNCIS-FWV)
最近更新時間：2013-12-24
問題と解答：全145問
100％の返金保証。1年間の無料アップデート。

試験番号：JN0-130問題集
試験科目：Juniper networks Certified internet specialist.e(jncis-e)
最近更新時間：2013-12-24
問題と解答：全128問
100％の返金保証。1年間の無料アップデート。

試験番号：JN0-303問題集
試験科目：Juniper networks Certified internet specialist.m(jncis-m)
最近更新時間：2013-12-24
問題と解答：全150問
100％の返金保証。1年間の無料アップデート。

試験番号：JN0-140問題集
試験科目：Certified Internet Associate (JNCIA-AC) 140 Exam
最近更新時間：2013-12-24
問題と解答：全120問
100％の返金保証。1年間の無料アップデート。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/JN0-130_exam.html

NO.1 Which CLI command displays the VRFs that are operational within each virtual router?
A. show vir
B. show ip vrf
C. show vrf vir
D. show mpls vrf
Answer: A

Juniper   JN0-130認定資格   JN0-130練習問題   JN0-130練習問題   JN0-130

NO.2 Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and
why?
A. It is Static. If the priorities are equal for a new neighbor and the current DIS only.
B. It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only.
C. It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it
is elected as the DIS.
D. It is Static. When a new intermediate system powers up on a multi-access network, even if it has a
higher priority, it may become a backup DIS.
Answer: C

Juniper認定試験   JN0-130   JN0-130   JN0-130

NO.3 Which message type is used to initiate an RSVP-TE label switched path?
A. path
B. resv
C. setup
D. session
Answer: A

Juniper   JN0-130   JN0-130参考書

NO.4 Which two BGP attributes are incorporated for loop prevention within an AS using a route reflection
configuration? (Choose two.)
A. AS Path
B. Next Hop
C. Cluster List
D. Originator ID
Answer: CD

Juniper   JN0-130   JN0-130   JN0-130認定資格

NO.5 Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A

Juniper過去問   JN0-130参考書   JN0-130練習問題   JN0-130認証試験   JN0-130問題集

NO.6 Which CLI command disconnects all subscribers on an ATM PVC?
A. clear port 4/3.99
B. logout port 4/3.99
C. clear subscriber port 4/3.99
D. logout subscriber port 4/3.99
Answer: D

Juniper   JN0-130   JN0-130認定証

NO.7 Which two types of routes may be advertised via EBGP? (Choose two.)
A. Routes that do not originate in the local AS and are learned by OSPF.
B. Routes that originate on the local router and are advertised into OSPF.
C. Routes that are transiting the local router and are BGP learned routes.
D. Routes that originate on the local router and are injected using a route map.
Answer: CD

Juniper認定証   JN0-130   JN0-130

NO.8 Which two services protect the ERX Edge Router from unauthorized CLI logins?
A. IPSec
B. SecureID
C. local passwords
D. default IP policy
E. RADIUS authentication
Answer: CE

Juniper   JN0-130   JN0-130   JN0-130   JN0-130認定証
16. Your ERX Edge Router is constantly going to a boot## prompt.
What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
Answer: D

Juniper   JN0-130練習問題   JN0-130   JN0-130
17. Which sequence of events describes the order used to restore normal router operation after
experiencing a corrupted flash?
A. initialize flash, reload, copy new system files from FTP server
B. reload, copy new system files from FTP server, initialize flash
C. initialize flash, copy new system files from FTP server, reload
D. reload, initialize flash, copy new system files from FTP server
Answer: C

Juniper   JN0-130   JN0-130
18. You are trying to recover from a corrupted flash.
Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management
interface when the ERX1400 router is at the boot## prompt?
A. ip address 192.168.1.1/24
B. ip address 192.168.1.1 subnetmask 24
C. ip address 192.168.1.1 255.255.255.0
D. ip address 192.168.1.1 mask 255.255.255.0
Answer: C

Juniper   JN0-130   JN0-130練習問題   JN0-130認定証
19. What describes the functionality of NTP when using multiple virtual routers?
A. All virtual routers can act as NTP clients and servers.
B. Only one virtual router can act as an NTP client and a server.
C. Only one virtual router can act as an NTP server but all can be clients.
D. Only one virtual router can act as an NTP client but all can be servers.
Answer: D

Juniper   JN0-130   JN0-130参考書   JN0-130練習問題   JN0-130
20. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D

Juniper問題集   JN0-130   JN0-130認定証   JN0-130
21. Which configuration command allows a virtual router to receive updates from a configured NTP
source?
A. ntp enable
B. enable ntp
C. set ntp-client
D. enable ntp-client
Answer: A

Juniper   JN0-130参考書   JN0-130認定試験
22. Which configuration command is used to send debug level events to the console in real time?
A. log here severity debug
B. log destination console severity debug
C. log severity debug destination console
D. log realtime destination console severity debug
Answer: B

Juniper認定資格   JN0-130認証試験   JN0-130過去問   JN0-130   JN0-130認定試験
23. Which command initiates a packet trace for all PPP packets on interface atm 6/1.33 ?
A. log filter debug pppPacket atm 6/1.33
B. log severity debug pppPacket atm 6/1.33
C. log filter debug category pppPacket atm 6/1.33
D. log severity debug category pppPacket atm 6/1.33
Answer: B

Juniper参考書   JN0-130   JN0-130認証試験
24. Log messages are appearing very quickly on the console of your ERX Edge Router.
Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A

Juniper   JN0-130   JN0-130
25. Which two configuration commands are required to direct debug level console logging to your current
ERX Edge Router Telnet session? (Choose two.)
A. log here
B. log telnet here
C. log destination console severity 7
D. log destination telnet severity debug
Answer: AC

Juniper参考書   JN0-130   JN0-130   JN0-130認定資格
26. A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of
pppPacket.
Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3.66
D. no log severity debug pppPacket 4/3.66
Answer: C

Juniper認定証   JN0-130認証試験   JN0-130参考書
27. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C

Juniper問題集   JN0-130   JN0-130認定証   JN0-130
28. Which three statements describe macros on the ERX Edge Router? (Choose three.)
A. They prompt users for input.
B. They cannot prompt users for input.
C. They can be created on the router itself.
D. They are an embedded programming language.
E. They can be created on the user's workstation.
Answer: ADE

Juniper   JN0-130過去問   JN0-130認定証   JN0-130認証試験
29. Which command is used to execute a macro called setup.mac ?
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B

Juniper過去問   JN0-130認証試験   JN0-130   JN0-130   JN0-130   JN0-130参考書
30. Which control expression must be the last line in all macros?
A. <# end #>
B. <# finish #>
C. <# endtmpl #>
D. <# terminate #>
Answer: C

Juniper参考書   JN0-130問題集   JN0-130認定資格   JN0-130認定証   JN0-130認定証

NO.9 Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and
192.168.255.255 into OSPF area 0?
A. network 192.168.0.0 255.255.0.0 area 0.0.0.0
B. network 192.168.0.0 0.0.255.255 area 0.0.0.0
C. area 0.0.0.0 network 192.168.0.0 255.255.0.0
D. area 0.0.0.0 network 192.168.0.0 0.0.255.255
Answer: B

Juniper   JN0-130認定試験   JN0-130

NO.10 In a Bridged 1483 network, which set of commands is used to configure an ATM subinterface?
A. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip address unnumbered loopback0
B. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip unnumbered loopback0
C. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip address unnumbered loopback0
D. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip unnumbered loopback0
Answer: D

Juniper認定試験   JN0-130   JN0-130認定試験   JN0-130練習問題   JN0-130認定資格

NO.11 Which three statements are true regarding the DHCP Internal Server? (Choose three.)
A. Can be in remote-access mode.
B. Can be in equal-access mode.
C. Can be in standalone mode.
D. Standalone mode is the default.
E. Equal-access mode is the default.
Answer: BCE

Juniper   JN0-130   JN0-130問題集   JN0-130   JN0-130過去問

NO.12 Which three statements about Label-Switched Paths (LSPs) are true? (Choose three.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs can be signaled by CAC.
D. LSPs can be configured explicitly.
E. LSPs can be configured dynamically.
Answer: BDE

Juniper   JN0-130   JN0-130認証試験

NO.13 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

Juniper   JN0-130問題集   JN0-130

NO.14 You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs
each interface is using.
Which CLI command displays this information?
A. show fast interface
B. show vlan interface
C. show vlan subinterface
D. show fast interface vlan
Answer: C

Juniper   JN0-130   JN0-130   JN0-130問題集

NO.15 Which CLI command displays the status of a PPP over Ethernet subinterface?
A. show pppoe interface
B. show ppp int state up
C. show ip interface brief
D. show pppoe subinterface
Answer: D

Juniper練習問題   JN0-130問題集   JN0-130認証試験   JN0-130認定証   JN0-130参考書   JN0-130

JN0-130 questions and answers

The exam materiala of the IT-Tests.com Juniper JN0-130 is specifically designed for candicates. It is a professional exam materials that the IT elite team specially tailored for you. Passed the exam certification in the IT industry will be reflected in international value. There are many dumps and training materials providers that would guarantee you pass the Juniper JN0-130 exam. IT-Tests.com speak with the facts, the moment when the miracle occurs can prove every word we said.

IT-Tests.com provide training tools included Juniper certification JN0-130 exam study materials and simulation training questions and more importantly, we will provide you practice questions and answers which are very close with real certification exam. Selecting IT-Tests.com can guarantee that you can in a short period of time to learn and to strengthen the professional knowledge of IT and pass Juniper certification JN0-130 exam with high score.

IT-Tests's products can not only help you successfully pass Juniper certification JN0-130 exams, but also provide you a year of free online update service，which will deliver the latest product to customers at the first time to let them have a full preparation for the exam. If you fail the exam, we will give you a full refund.

Exam Code: JN0-130
Exam Name: Juniper (Juniper networks Certified internet specialist.e(jncis-e))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 128 Questions and Answers
Last Update: 2013-11-08

IT-Tests.com can provide a shortcut for you and save you a lot of time and effort. IT-Tests.com will provide good training tools for your Juniper certification JN0-130 exam and help you pass Juniper certification JN0-130 exam. If you see other websites provide relevant information to the website, you can continue to look down and you will find that in fact the information is mainly derived from our IT-Tests. Our IT-Tests.com provide the most comprehensive information and update fastest.

If you find any quality problems of our JN0-130 or you do not pass the exam, we will unconditionally full refund. IT-Tests.com is professional site that providing Juniper JN0-130 questions and answers , it covers almost the JN0-130 full knowledge points.

JN0-130 (Juniper networks Certified internet specialist.e(jncis-e)) Free Demo Download: http://www.it-tests.com/JN0-130.html

NO.1 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

Juniper answers real questions   JN0-130   JN0-130   JN0-130 certification

NO.2 Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and
192.168.255.255 into OSPF area 0?
A. network 192.168.0.0 255.255.0.0 area 0.0.0.0
B. network 192.168.0.0 0.0.255.255 area 0.0.0.0
C. area 0.0.0.0 network 192.168.0.0 255.255.0.0
D. area 0.0.0.0 network 192.168.0.0 0.0.255.255
Answer: B

Juniper   JN0-130 test questions   JN0-130

NO.3 Which two types of routes may be advertised via EBGP? (Choose two.)
A. Routes that do not originate in the local AS and are learned by OSPF.
B. Routes that originate on the local router and are advertised into OSPF.
C. Routes that are transiting the local router and are BGP learned routes.
D. Routes that originate on the local router and are injected using a route map.
Answer: CD

Juniper braindump   JN0-130   JN0-130   JN0-130

NO.4 Which CLI command displays the VRFs that are operational within each virtual router?
A. show vir
B. show ip vrf
C. show vrf vir
D. show mpls vrf
Answer: A

Juniper   JN0-130 test answers   JN0-130 exam dumps   JN0-130 original questions   JN0-130

NO.5 Which three statements about Label-Switched Paths (LSPs) are true? (Choose three.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs can be signaled by CAC.
D. LSPs can be configured explicitly.
E. LSPs can be configured dynamically.
Answer: BDE

Juniper certification   JN0-130   JN0-130 dumps

NO.6 Which CLI command displays the status of a PPP over Ethernet subinterface?
A. show pppoe interface
B. show ppp int state up
C. show ip interface brief
D. show pppoe subinterface
Answer: D

Juniper braindump   JN0-130 pdf   JN0-130   JN0-130 braindump

NO.7 Which two services protect the ERX Edge Router from unauthorized CLI logins?
A. IPSec
B. SecureID
C. local passwords
D. default IP policy
E. RADIUS authentication
Answer: CE

Juniper   JN0-130 certification   JN0-130 certification   JN0-130 test
16. Your ERX Edge Router is constantly going to a boot## prompt.
What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
Answer: D

Juniper   JN0-130 answers real questions   JN0-130   JN0-130 certification training
17. Which sequence of events describes the order used to restore normal router operation after
experiencing a corrupted flash?
A. initialize flash, reload, copy new system files from FTP server
B. reload, copy new system files from FTP server, initialize flash
C. initialize flash, copy new system files from FTP server, reload
D. reload, initialize flash, copy new system files from FTP server
Answer: C

Juniper exam   JN0-130 certification   JN0-130 braindump   JN0-130   JN0-130   JN0-130 dumps
18. You are trying to recover from a corrupted flash.
Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management
interface when the ERX1400 router is at the boot## prompt?
A. ip address 192.168.1.1/24
B. ip address 192.168.1.1 subnetmask 24
C. ip address 192.168.1.1 255.255.255.0
D. ip address 192.168.1.1 mask 255.255.255.0
Answer: C

Juniper braindump   JN0-130   JN0-130   JN0-130 test
19. What describes the functionality of NTP when using multiple virtual routers?
A. All virtual routers can act as NTP clients and servers.
B. Only one virtual router can act as an NTP client and a server.
C. Only one virtual router can act as an NTP server but all can be clients.
D. Only one virtual router can act as an NTP client but all can be servers.
Answer: D

Juniper certification   JN0-130 original questions   JN0-130   JN0-130
20. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D

Juniper pdf   JN0-130 pdf   JN0-130 answers real questions   JN0-130 original questions   JN0-130
21. Which configuration command allows a virtual router to receive updates from a configured NTP
source?
A. ntp enable
B. enable ntp
C. set ntp-client
D. enable ntp-client
Answer: A

Juniper questions   JN0-130   JN0-130 exam dumps   JN0-130 exam   JN0-130 questions
22. Which configuration command is used to send debug level events to the console in real time?
A. log here severity debug
B. log destination console severity debug
C. log severity debug destination console
D. log realtime destination console severity debug
Answer: B

Juniper braindump   JN0-130 exam dumps   JN0-130   JN0-130
23. Which command initiates a packet trace for all PPP packets on interface atm 6/1.33 ?
A. log filter debug pppPacket atm 6/1.33
B. log severity debug pppPacket atm 6/1.33
C. log filter debug category pppPacket atm 6/1.33
D. log severity debug category pppPacket atm 6/1.33
Answer: B

Juniper   JN0-130   JN0-130   JN0-130 certification training   JN0-130 questions
24. Log messages are appearing very quickly on the console of your ERX Edge Router.
Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A

Juniper exam prep   JN0-130 original questions   JN0-130 answers real questions   JN0-130 exam dumps   JN0-130
25. Which two configuration commands are required to direct debug level console logging to your current
ERX Edge Router Telnet session? (Choose two.)
A. log here
B. log telnet here
C. log destination console severity 7
D. log destination telnet severity debug
Answer: AC

Juniper   JN0-130   JN0-130 original questions   JN0-130 study guide
26. A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of
pppPacket.
Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3.66
D. no log severity debug pppPacket 4/3.66
Answer: C

Juniper certification   JN0-130   JN0-130   JN0-130 test   JN0-130 test questions   JN0-130
27. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C

Juniper   JN0-130   JN0-130 answers real questions
28. Which three statements describe macros on the ERX Edge Router? (Choose three.)
A. They prompt users for input.
B. They cannot prompt users for input.
C. They can be created on the router itself.
D. They are an embedded programming language.
E. They can be created on the user's workstation.
Answer: ADE

Juniper   JN0-130   JN0-130   JN0-130 pdf
29. Which command is used to execute a macro called setup.mac ?
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B

Juniper certification   JN0-130 test   JN0-130   JN0-130
30. Which control expression must be the last line in all macros?
A. <# end #>
B. <# finish #>
C. <# endtmpl #>
D. <# terminate #>
Answer: C

Juniper   JN0-130 dumps   JN0-130 braindump   JN0-130 demo

NO.8 Which message type is used to initiate an RSVP-TE label switched path?
A. path
B. resv
C. setup
D. session
Answer: A

Juniper   JN0-130   JN0-130   JN0-130

NO.9 Which two BGP attributes are incorporated for loop prevention within an AS using a route reflection
configuration? (Choose two.)
A. AS Path
B. Next Hop
C. Cluster List
D. Originator ID
Answer: CD

Juniper certification   JN0-130   JN0-130 test questions

NO.10 Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A

Juniper   JN0-130   JN0-130 demo

NO.11 You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs
each interface is using.
Which CLI command displays this information?
A. show fast interface
B. show vlan interface
C. show vlan subinterface
D. show fast interface vlan
Answer: C

Juniper   JN0-130   JN0-130 braindump   JN0-130   JN0-130 exam dumps

NO.12 Which CLI command disconnects all subscribers on an ATM PVC?
A. clear port 4/3.99
B. logout port 4/3.99
C. clear subscriber port 4/3.99
D. logout subscriber port 4/3.99
Answer: D

Juniper test questions   JN0-130 exam dumps   JN0-130   JN0-130

NO.13 Which three statements are true regarding the DHCP Internal Server? (Choose three.)
A. Can be in remote-access mode.
B. Can be in equal-access mode.
C. Can be in standalone mode.
D. Standalone mode is the default.
E. Equal-access mode is the default.
Answer: BCE

Juniper   JN0-130   JN0-130   JN0-130 practice test   JN0-130 braindump   JN0-130 test

NO.14 In a Bridged 1483 network, which set of commands is used to configure an ATM subinterface?
A. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip address unnumbered loopback0
B. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip unnumbered loopback0
C. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip address unnumbered loopback0
D. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip unnumbered loopback0
Answer: D

Juniper questions   JN0-130   JN0-130   JN0-130 pdf

NO.15 Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and
why?
A. It is Static. If the priorities are equal for a new neighbor and the current DIS only.
B. It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only.
C. It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it
is elected as the DIS.
D. It is Static. When a new intermediate system powers up on a multi-access network, even if it has a
higher priority, it may become a backup DIS.
Answer: C

Juniper   JN0-130 exam dumps   JN0-130 certification   JN0-130 test   JN0-130

IT-Tests.com offer the latest 1Z0-466 Questions & Answers and high-quality 70-482 PDF Practice Test. Our 70-583 VCE testing engine and JN0-533 study guide can help you pass the real exam. High-quality MB5-858 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/JN0-130.html

Juniper JN0-130 training and testing

IT-Tests.com Juniper JN0-130 exam training materials have the best price value. Compared to many others training materials, IT-Tests.com's Juniper JN0-130 exam training materials are the best. If you need IT exam training materials, if you do not choose IT-Tests.com's Juniper JN0-130 exam training materials, you will regret forever. Select IT-Tests.com's Juniper JN0-130 exam training materials, you will benefit from it last a lifetime.

When you're in pain, it is best to learn things. Learning will make you invincible. IT-Tests.com Juniper JN0-130 exam training materials can also help you to be invincible. With this training materials, you will receive the Juniper JN0-130 certification which recognized and accepted internationally. Then all of your life, including money and position, will improve a lot. Until then, will you still feel painful? No, you will be very happy. You should thanks IT-Tests.com which provide you with a good training materials. It can help you when you lost, and let you not only improve your own quality, but also demonstratethe value of your perfect life.

In real life, every great career must have the confidence to take the first step. When you suspect your level of knowledge, and cramming before the exam, do you think of how to pass the Juniper JN0-130 exam with confidence? Do not worry, IT-Tests.com is the only provider of training materials that can help you to pass the exam. Our training materials, including questions and answers, the pass rate can reach 100%. With IT-Tests.com Juniper JN0-130 exam training materials, you can begin your first step forward. When you get the certification of Juniper JN0-130 exam, the glorious period of your career will start.

You can first download IT-Tests's free exercises and answers about Juniper certification JN0-130 exam as a try, then you will feel that IT-Tests.com give you a reassurance for passing the exam. If you choose IT-Tests.com to provide you with the pertinence training, you can easily pass the Juniper certification JN0-130 exam.

IT-Tests.com IT Certification has years of training experience. IT-Tests.com Juniper JN0-130 exam training materials is a reliable product. IT elite team continue to provide our candidates with the latest version of the JN0-130 exam training materials. Our staff made ​​great efforts to ensure that you always get good grades in examinations. To be sure, IT-Tests.com Juniper JN0-130 exam materials can provide you with the most practical IT certification material.

If you choose to buy the IT-Tests's raining plan, we can make ensure you to 100% pass your first time to attend Juniper certification JN0-130 exam. If you fail the exam, we will give a full refund to you.

IT-Tests.com guarantee exam success rate of 100% ratio, except no one. You choose IT-Tests.com, and select the training you want to start, you will get the best resources with market and reliability assurance.

Exam Code: JN0-130
Exam Name: Juniper (Juniper networks Certified internet specialist.e(jncis-e))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 128 Questions and Answers
Last Update: 2013-09-18

JN0-130 (Juniper networks Certified internet specialist.e(jncis-e)) Free Demo Download: http://www.it-tests.com/JN0-130.html

NO.1 Which CLI command displays the status of a PPP over Ethernet subinterface?
A. show pppoe interface
B. show ppp int state up
C. show ip interface brief
D. show pppoe subinterface
Answer: D

Juniper practice test   JN0-130   JN0-130   JN0-130 certification training   JN0-130 braindump

NO.2 Which message type is used to initiate an RSVP-TE label switched path?
A. path
B. resv
C. setup
D. session
Answer: A

Juniper   JN0-130 exam dumps   JN0-130 pdf

NO.3 Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A

Juniper   JN0-130 braindump   JN0-130 exam prep   JN0-130

NO.4 Which two BGP attributes are incorporated for loop prevention within an AS using a route reflection
configuration? (Choose two.)
A. AS Path
B. Next Hop
C. Cluster List
D. Originator ID
Answer: CD

Juniper original questions   JN0-130   JN0-130 study guide   JN0-130 dumps   JN0-130

NO.5 Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and
why?
A. It is Static. If the priorities are equal for a new neighbor and the current DIS only.
B. It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only.
C. It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it
is elected as the DIS.
D. It is Static. When a new intermediate system powers up on a multi-access network, even if it has a
higher priority, it may become a backup DIS.
Answer: C

Juniper original questions   JN0-130 exam simulations   JN0-130 study guide   JN0-130 exam dumps

NO.6 Which two services protect the ERX Edge Router from unauthorized CLI logins?
A. IPSec
B. SecureID
C. local passwords
D. default IP policy
E. RADIUS authentication
Answer: CE

Juniper   JN0-130   JN0-130 certification
16. Your ERX Edge Router is constantly going to a boot## prompt.
What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
Answer: D

Juniper   JN0-130 answers real questions   JN0-130 certification training
17. Which sequence of events describes the order used to restore normal router operation after
experiencing a corrupted flash?
A. initialize flash, reload, copy new system files from FTP server
B. reload, copy new system files from FTP server, initialize flash
C. initialize flash, copy new system files from FTP server, reload
D. reload, initialize flash, copy new system files from FTP server
Answer: C

Juniper certification training   JN0-130   JN0-130   JN0-130 test
18. You are trying to recover from a corrupted flash.
Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management
interface when the ERX1400 router is at the boot## prompt?
A. ip address 192.168.1.1/24
B. ip address 192.168.1.1 subnetmask 24
C. ip address 192.168.1.1 255.255.255.0
D. ip address 192.168.1.1 mask 255.255.255.0
Answer: C

Juniper   JN0-130   JN0-130   JN0-130 study guide
19. What describes the functionality of NTP when using multiple virtual routers?
A. All virtual routers can act as NTP clients and servers.
B. Only one virtual router can act as an NTP client and a server.
C. Only one virtual router can act as an NTP server but all can be clients.
D. Only one virtual router can act as an NTP client but all can be servers.
Answer: D

Juniper demo   JN0-130 questions   JN0-130 exam
20. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D

Juniper   JN0-130 test answers   JN0-130   JN0-130 practice test   JN0-130   JN0-130 test questions
21. Which configuration command allows a virtual router to receive updates from a configured NTP
source?
A. ntp enable
B. enable ntp
C. set ntp-client
D. enable ntp-client
Answer: A

Juniper exam prep   JN0-130   JN0-130   JN0-130 exam prep   JN0-130 exam simulations
22. Which configuration command is used to send debug level events to the console in real time?
A. log here severity debug
B. log destination console severity debug
C. log severity debug destination console
D. log realtime destination console severity debug
Answer: B

Juniper exam prep   JN0-130   JN0-130 test questions   JN0-130
23. Which command initiates a packet trace for all PPP packets on interface atm 6/1.33 ?
A. log filter debug pppPacket atm 6/1.33
B. log severity debug pppPacket atm 6/1.33
C. log filter debug category pppPacket atm 6/1.33
D. log severity debug category pppPacket atm 6/1.33
Answer: B

Juniper   JN0-130 questions   JN0-130   JN0-130
24. Log messages are appearing very quickly on the console of your ERX Edge Router.
Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A

Juniper   JN0-130   JN0-130 dumps   JN0-130   JN0-130 dumps
25. Which two configuration commands are required to direct debug level console logging to your current
ERX Edge Router Telnet session? (Choose two.)
A. log here
B. log telnet here
C. log destination console severity 7
D. log destination telnet severity debug
Answer: AC

Juniper   JN0-130   JN0-130   JN0-130 study guide
26. A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of
pppPacket.
Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3.66
D. no log severity debug pppPacket 4/3.66
Answer: C

Juniper braindump   JN0-130 dumps   JN0-130 original questions   JN0-130 exam
27. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C

Juniper certification   JN0-130 demo   JN0-130   JN0-130
28. Which three statements describe macros on the ERX Edge Router? (Choose three.)
A. They prompt users for input.
B. They cannot prompt users for input.
C. They can be created on the router itself.
D. They are an embedded programming language.
E. They can be created on the user's workstation.
Answer: ADE

Juniper   JN0-130   JN0-130
29. Which command is used to execute a macro called setup.mac ?
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B

Juniper answers real questions   JN0-130 dumps   JN0-130 pdf
30. Which control expression must be the last line in all macros?
A. <# end #>
B. <# finish #>
C. <# endtmpl #>
D. <# terminate #>
Answer: C

Juniper test answers   JN0-130   JN0-130   JN0-130   JN0-130

NO.7 Which three statements about Label-Switched Paths (LSPs) are true? (Choose three.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs can be signaled by CAC.
D. LSPs can be configured explicitly.
E. LSPs can be configured dynamically.
Answer: BDE

Juniper certification   JN0-130   JN0-130 demo

NO.8 Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and
192.168.255.255 into OSPF area 0?
A. network 192.168.0.0 255.255.0.0 area 0.0.0.0
B. network 192.168.0.0 0.0.255.255 area 0.0.0.0
C. area 0.0.0.0 network 192.168.0.0 255.255.0.0
D. area 0.0.0.0 network 192.168.0.0 0.0.255.255
Answer: B

Juniper   JN0-130 exam   JN0-130

NO.9 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

Juniper   JN0-130   JN0-130   JN0-130 test questions

NO.10 Which CLI command disconnects all subscribers on an ATM PVC?
A. clear port 4/3.99
B. logout port 4/3.99
C. clear subscriber port 4/3.99
D. logout subscriber port 4/3.99
Answer: D

Juniper pdf   JN0-130 original questions   JN0-130   JN0-130   JN0-130

NO.11 Which three statements are true regarding the DHCP Internal Server? (Choose three.)
A. Can be in remote-access mode.
B. Can be in equal-access mode.
C. Can be in standalone mode.
D. Standalone mode is the default.
E. Equal-access mode is the default.
Answer: BCE

Juniper practice test   JN0-130 practice test   JN0-130

NO.12 In a Bridged 1483 network, which set of commands is used to configure an ATM subinterface?
A. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip address unnumbered loopback0
B. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip unnumbered loopback0
C. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip address unnumbered loopback0
D. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip unnumbered loopback0
Answer: D

Juniper   JN0-130   JN0-130 practice test   JN0-130   JN0-130

NO.13 You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs
each interface is using.
Which CLI command displays this information?
A. show fast interface
B. show vlan interface
C. show vlan subinterface
D. show fast interface vlan
Answer: C

Juniper   JN0-130   JN0-130   JN0-130 test questions   JN0-130   JN0-130

NO.14 Which two types of routes may be advertised via EBGP? (Choose two.)
A. Routes that do not originate in the local AS and are learned by OSPF.
B. Routes that originate on the local router and are advertised into OSPF.
C. Routes that are transiting the local router and are BGP learned routes.
D. Routes that originate on the local router and are injected using a route map.
Answer: CD

Juniper   JN0-130   JN0-130   JN0-130 demo   JN0-130 pdf

NO.15 Which CLI command displays the VRFs that are operational within each virtual router?
A. show vir
B. show ip vrf
C. show vrf vir
D. show mpls vrf
Answer: A

Juniper test answers   JN0-130   JN0-130 certification training   JN0-130

IT-Tests.com offer the latest C_TSCM62_65 Questions & Answers and high-quality 312-50v8 PDF Practice Test. Our NS0-504 VCE testing engine and 700-101 study guide can help you pass the real exam. High-quality 3103 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/JN0-130.html