Juniper JN0-531 JN0-130 JN0-303 JN0-140認定試験に適する最高の問題集を捧げる

他の人の成功を見上げるよりも、自分の成功への努力をしたほうがよいです。JPexamのJuniperのJN0-531 JN0-130 JN0-303 JN0-140試験トレーニング資料はあなたの成功への第一歩です。この資料を持っていたら、難しいJuniperのJN0-531 JN0-130 JN0-303 JN0-140認定試験に合格することができるようになります。あなたは新しい旅を始めることができ、人生の輝かしい実績を実現することができます。

JPexamの商品は100%の合格率を保証いたします。JPexamはITに対応性研究続けて、高品質で低価格な問題集が開発いたしました。JPexamの商品の最大の特徴は20時間だけ育成課程を通して楽々に合格できます。

今の多くのIT者が参加している試験に、JuniperのJN0-531 JN0-130 JN0-303 JN0-140認定試験がとても人気がある一つとして、合格するために豊富な知識と経験が必要です。JuniperのJN0-531 JN0-130 JN0-303 JN0-140認定試験に準備する練習ツールや訓練機関に通学しなればまりませんでしょう。JPexamは君のもっともよい選択ですよ。多くIT者になりたい方にJuniperのJN0-531 JN0-130 JN0-303 JN0-140認定試験に関する問題集を準備しております。君に短い時間に大量のITの専門知識を補充させています。

アンケート調査によると、IT業種の皆さんが現在最も受験したい認定試験はJuniperのJN0-531 JN0-130 JN0-303 JN0-140試験だそうです。確かに、この試験はとても大切な試験で、公的に認可されたものです。しかも、この認定資格があなたが高い技能を身につけていることも証明できます。しかしながら、試験の大切さと同じ、この試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。JPexamはあなたに難しいJN0-531 JN0-130 JN0-303 JN0-140認定試験に合格することを助けてあげますから。

試験番号：JN0-531問題集
試験科目：FWV, Specailist(JNCIS-FWV)
最近更新時間：2013-12-24
問題と解答：全145問
100％の返金保証。1年間の無料アップデート。

試験番号：JN0-130問題集
試験科目：Juniper networks Certified internet specialist.e(jncis-e)
最近更新時間：2013-12-24
問題と解答：全128問
100％の返金保証。1年間の無料アップデート。

試験番号：JN0-303問題集
試験科目：Juniper networks Certified internet specialist.m(jncis-m)
最近更新時間：2013-12-24
問題と解答：全150問
100％の返金保証。1年間の無料アップデート。

試験番号：JN0-140問題集
試験科目：Certified Internet Associate (JNCIA-AC) 140 Exam
最近更新時間：2013-12-24
問題と解答：全120問
100％の返金保証。1年間の無料アップデート。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード：http://www.jpexam.com/JN0-130_exam.html

NO.1 Which CLI command displays the VRFs that are operational within each virtual router?
A. show vir
B. show ip vrf
C. show vrf vir
D. show mpls vrf
Answer: A

Juniper   JN0-130認定資格   JN0-130練習問題   JN0-130練習問題   JN0-130

NO.2 Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and
why?
A. It is Static. If the priorities are equal for a new neighbor and the current DIS only.
B. It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only.
C. It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it
is elected as the DIS.
D. It is Static. When a new intermediate system powers up on a multi-access network, even if it has a
higher priority, it may become a backup DIS.
Answer: C

Juniper認定試験   JN0-130   JN0-130   JN0-130

NO.3 Which message type is used to initiate an RSVP-TE label switched path?
A. path
B. resv
C. setup
D. session
Answer: A

Juniper   JN0-130   JN0-130参考書

NO.4 Which two BGP attributes are incorporated for loop prevention within an AS using a route reflection
configuration? (Choose two.)
A. AS Path
B. Next Hop
C. Cluster List
D. Originator ID
Answer: CD

Juniper   JN0-130   JN0-130   JN0-130認定資格

NO.5 Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A

Juniper過去問   JN0-130参考書   JN0-130練習問題   JN0-130認証試験   JN0-130問題集

NO.6 Which CLI command disconnects all subscribers on an ATM PVC?
A. clear port 4/3.99
B. logout port 4/3.99
C. clear subscriber port 4/3.99
D. logout subscriber port 4/3.99
Answer: D

Juniper   JN0-130   JN0-130認定証

NO.7 Which two types of routes may be advertised via EBGP? (Choose two.)
A. Routes that do not originate in the local AS and are learned by OSPF.
B. Routes that originate on the local router and are advertised into OSPF.
C. Routes that are transiting the local router and are BGP learned routes.
D. Routes that originate on the local router and are injected using a route map.
Answer: CD

Juniper認定証   JN0-130   JN0-130

NO.8 Which two services protect the ERX Edge Router from unauthorized CLI logins?
A. IPSec
B. SecureID
C. local passwords
D. default IP policy
E. RADIUS authentication
Answer: CE

Juniper   JN0-130   JN0-130   JN0-130   JN0-130認定証
16. Your ERX Edge Router is constantly going to a boot## prompt.
What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
Answer: D

Juniper   JN0-130練習問題   JN0-130   JN0-130
17. Which sequence of events describes the order used to restore normal router operation after
experiencing a corrupted flash?
A. initialize flash, reload, copy new system files from FTP server
B. reload, copy new system files from FTP server, initialize flash
C. initialize flash, copy new system files from FTP server, reload
D. reload, initialize flash, copy new system files from FTP server
Answer: C

Juniper   JN0-130   JN0-130
18. You are trying to recover from a corrupted flash.
Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management
interface when the ERX1400 router is at the boot## prompt?
A. ip address 192.168.1.1/24
B. ip address 192.168.1.1 subnetmask 24
C. ip address 192.168.1.1 255.255.255.0
D. ip address 192.168.1.1 mask 255.255.255.0
Answer: C

Juniper   JN0-130   JN0-130練習問題   JN0-130認定証
19. What describes the functionality of NTP when using multiple virtual routers?
A. All virtual routers can act as NTP clients and servers.
B. Only one virtual router can act as an NTP client and a server.
C. Only one virtual router can act as an NTP server but all can be clients.
D. Only one virtual router can act as an NTP client but all can be servers.
Answer: D

Juniper   JN0-130   JN0-130参考書   JN0-130練習問題   JN0-130
20. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D

Juniper問題集   JN0-130   JN0-130認定証   JN0-130
21. Which configuration command allows a virtual router to receive updates from a configured NTP
source?
A. ntp enable
B. enable ntp
C. set ntp-client
D. enable ntp-client
Answer: A

Juniper   JN0-130参考書   JN0-130認定試験
22. Which configuration command is used to send debug level events to the console in real time?
A. log here severity debug
B. log destination console severity debug
C. log severity debug destination console
D. log realtime destination console severity debug
Answer: B

Juniper認定資格   JN0-130認証試験   JN0-130過去問   JN0-130   JN0-130認定試験
23. Which command initiates a packet trace for all PPP packets on interface atm 6/1.33 ?
A. log filter debug pppPacket atm 6/1.33
B. log severity debug pppPacket atm 6/1.33
C. log filter debug category pppPacket atm 6/1.33
D. log severity debug category pppPacket atm 6/1.33
Answer: B

Juniper参考書   JN0-130   JN0-130認証試験
24. Log messages are appearing very quickly on the console of your ERX Edge Router.
Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A

Juniper   JN0-130   JN0-130
25. Which two configuration commands are required to direct debug level console logging to your current
ERX Edge Router Telnet session? (Choose two.)
A. log here
B. log telnet here
C. log destination console severity 7
D. log destination telnet severity debug
Answer: AC

Juniper参考書   JN0-130   JN0-130   JN0-130認定資格
26. A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of
pppPacket.
Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3.66
D. no log severity debug pppPacket 4/3.66
Answer: C

Juniper認定証   JN0-130認証試験   JN0-130参考書
27. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C

Juniper問題集   JN0-130   JN0-130認定証   JN0-130
28. Which three statements describe macros on the ERX Edge Router? (Choose three.)
A. They prompt users for input.
B. They cannot prompt users for input.
C. They can be created on the router itself.
D. They are an embedded programming language.
E. They can be created on the user's workstation.
Answer: ADE

Juniper   JN0-130過去問   JN0-130認定証   JN0-130認証試験
29. Which command is used to execute a macro called setup.mac ?
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B

Juniper過去問   JN0-130認証試験   JN0-130   JN0-130   JN0-130   JN0-130参考書
30. Which control expression must be the last line in all macros?
A. <# end #>
B. <# finish #>
C. <# endtmpl #>
D. <# terminate #>
Answer: C

Juniper参考書   JN0-130問題集   JN0-130認定資格   JN0-130認定証   JN0-130認定証

NO.9 Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and
192.168.255.255 into OSPF area 0?
A. network 192.168.0.0 255.255.0.0 area 0.0.0.0
B. network 192.168.0.0 0.0.255.255 area 0.0.0.0
C. area 0.0.0.0 network 192.168.0.0 255.255.0.0
D. area 0.0.0.0 network 192.168.0.0 0.0.255.255
Answer: B

Juniper   JN0-130認定試験   JN0-130

NO.10 In a Bridged 1483 network, which set of commands is used to configure an ATM subinterface?
A. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip address unnumbered loopback0
B. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip unnumbered loopback0
C. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip address unnumbered loopback0
D. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip unnumbered loopback0
Answer: D

Juniper認定試験   JN0-130   JN0-130認定試験   JN0-130練習問題   JN0-130認定資格

NO.11 Which three statements are true regarding the DHCP Internal Server? (Choose three.)
A. Can be in remote-access mode.
B. Can be in equal-access mode.
C. Can be in standalone mode.
D. Standalone mode is the default.
E. Equal-access mode is the default.
Answer: BCE

Juniper   JN0-130   JN0-130問題集   JN0-130   JN0-130過去問

NO.12 Which three statements about Label-Switched Paths (LSPs) are true? (Choose three.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs can be signaled by CAC.
D. LSPs can be configured explicitly.
E. LSPs can be configured dynamically.
Answer: BDE

Juniper   JN0-130   JN0-130認証試験

NO.13 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

Juniper   JN0-130問題集   JN0-130

NO.14 You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs
each interface is using.
Which CLI command displays this information?
A. show fast interface
B. show vlan interface
C. show vlan subinterface
D. show fast interface vlan
Answer: C

Juniper   JN0-130   JN0-130   JN0-130問題集

NO.15 Which CLI command displays the status of a PPP over Ethernet subinterface?
A. show pppoe interface
B. show ppp int state up
C. show ip interface brief
D. show pppoe subinterface
Answer: D

Juniper練習問題   JN0-130問題集   JN0-130認証試験   JN0-130認定証   JN0-130参考書   JN0-130

Juniper JN0-303 exam practice questions and answers

We all know that in the fiercely competitive IT industry, having some IT authentication certificates is very necessary. IT authentication certificate is a best proof for your IT professional knowledge and experience. Juniper JN0-303 is a very important certification exam in the IT industry and passing Juniper certification JN0-303 exam is very difficult. But in order to let the job position to improve spending some money to choose a good training institution to help you pass the exam is worthful. IT-Tests's latest training material about Juniper certification JN0-303 exam have 95% similarity with the real test. If you use IT-Tests'straining program, you can 100% pass the exam. If you fail the exam, we will give a full refund to you.

Take advantage of the IT-Tests.com's Juniper training materials to prepare for the exam, let me feel that the exam have never so easy to pass. This is someone who passed the examination said to us. With IT-Tests.com Juniper JN0-303 exam certification training, you can sort out your messy thoughts, and no longer twitchy for the exam. IT-Tests.com have some questions and answers provided free of charge as a trial. If I just said, you may be not believe that. But as long as you use the trial version, you will believe what I say. You will know the effect of this exam materials.

Feedbacks of many IT professionals who have passed Juniper certification JN0-303 exam prove that their successes benefit from IT-Tests's help. IT-Tests's targeted test practice questions and answers to gave them great help, which save their valuable time and energy, and allow them to easily and smoothly pass their first Juniper certification JN0-303 exam. So IT-Tests.com a website worthy of your trust. Please select IT-Tests, you will be the next successful IT person. IT-Tests.com will help you achieve your dream.

Now there are many IT training institutions which can provide you with Juniper certification JN0-303 exam related training material, but usually through these website examinees do not gain detailed material. Because the materials they provide are specialized for Juniper certification JN0-303 exam, so they didn't attract the examinee's attention.

IT-Tests.com free update our training materials, which means you will always get the latest JN0-303 exam training materials. If JN0-303 exam objectives change, The learning materials IT-Tests.com provided will follow the change. IT-Tests.com know the needs of each candidate, we will help you through your JN0-303 exam certification. We help each candidate to pass the exam with best price and highest quality.

IT-Tests.com is a convenient website to provide service for many of the candidates participating in the IT certification exams. A lot of candidates who choose to use the IT-Tests's product have passed IT certification exams for only one time. And from the feedback of them, helps from IT-Tests.com are proved to be effective. IT-Tests's expert team is a large team composed of senior IT professionals. And they take advantage of their expertise and abundant experience to come up with the useful training materials about JN0-303 certification exam. IT-Tests's simulation test software and related questions of JN0-303 certification exam are produced by the analysis of JN0-303 exam outline, and they can definitely help you pass your first time to participate in JN0-303 certification exam.

Exam Code: JN0-303
Exam Name: Juniper (Juniper networks Certified internet specialist.m(jncis-m))
Free One year updates to match real exam scenarios, 100% pass and refund Warranty.
Total Q&A: 150 Questions and Answers
Last Update: 2013-10-14

JN0-303 (Juniper networks Certified internet specialist.m(jncis-m)) Free Demo Download: http://www.it-tests.com/JN0-303.html

NO.1 Which multicast mode does Auto-RP require?
A. Link-mode
B. Dense mode
C. Sparse mode D. Sparse-dense mode
Answer: D

Juniper demo   JN0-303   JN0-303   JN0-303 test answers   JN0-303 braindump

NO.2 When comparing CPE and provider-provisioned VPNs (PPVPN), which two statements are true?
(Choose two.)
A. CPE VPN's require dedicated VPN aware hardware at customer site, PPVPN does not.
B. PPVPN's require dedicated VPN aware hardware at customer site, CPE VPN's does not.
C. CPE VPN's scale better than PPVPN's as they do not require a per site configuration on the CPE.
D. PPVPN's scale better than CPE VPN's as they do not require a per site configuration on the CPE.
Answer: AD

Juniper certification   JN0-303   JN0-303 certification   JN0-303 pdf

NO.3 Which two multicast groups support Auto-RP mapping and discovery? (Choose two.)
A. 224.0.0.39
B. 224.0.1.39
C. 224.0.0.40
D. 224.0.1.40
Answer: BD

Juniper   JN0-303 certification training   JN0-303   JN0-303

NO.4 In JUNOS software, what is required to redistribute RIP routes into OSPF?
A. Apply an export policy in RIP.
B. Apply an import policy in RIP.
C. Apply an export policy in OSPF.
D. Apply an import policy in OSPF.
Answer: C

Juniper exam prep   JN0-303 exam simulations   JN0-303   JN0-303   JN0-303

NO.5 What is the Draft-Kompella control plane based on?
A. IGP
B. LDP
C. BGP
D. MPLS
Answer: C

Juniper   JN0-303 braindump   JN0-303   JN0-303   JN0-303

NO.6 Which three RP election mechanisms are available in a PIM-SM domain? (Choose three.)
A. Static
B. Auto-RP
C. Dynamic-RP
D. Bootstrap router
Answer: ABD

Juniper dumps   JN0-303   JN0-303

NO.7 What prevents routing loops when MSDP is configured across multiple domains?
A. PIM-SM
B. Scoping
C. Auto-RP
D. MBGP
Answer: D

Juniper exam prep   JN0-303 demo   JN0-303 test answers

NO.8 What are two commands that can be used to configure MBGP for multicast? (choose two)
A. Under the BGP group, configure family inet any
B. Use the set protocol MBGP command to enable MBGP
C. Under the BGP group, configure family inet multicast
D. Use the set rib-group command to copy the multicast routes into inet.1
Answer: AC

Juniper   JN0-303   JN0-303 pdf

NO.9 PE1 has connections to VPN sites that are served by three remote PE routers. How many LSP's must
be established to support 2547bis?
A. an LSP for each local CE device
B. an LSP for each remote PE device
C. an LSP for each remote CE device
D. an LSP for each CE facing interface
Answer: B

Juniper practice test   JN0-303 practice test   JN0-303 pdf   JN0-303

NO.10 Which two mechanisms control route distribution between PE routers in a 2547bis VPN? (Choose
two.)
A. Site ID
B. Policies
C. Circuit ID
D. Extended communities
Answer: BD

Juniper certification   JN0-303 certification   JN0-303 dumps

NO.11 Which LSA is the Type 10?
A. Router LSA
B. Opaque LSA
C. AS attributes LSA
D. ASBR summary LSA
E. Network summary LSA
Answer: B

Juniper   JN0-303   JN0-303 test answers   JN0-303

NO.12 An OSPF non-backbone area allows external routes to be flooded within the area. These external
routes are
propagated into other areas. However, external routes from other areas are not allowed to enter this area.
Which type of
OSPF area does this describe?
A. stub area
B. transit area
C. border area
D. not-so-stubby area
Answer: D

Juniper   JN0-303 pdf   JN0-303   JN0-303 dumps   JN0-303

NO.13 What is the administrative scoping address range associated with global scope?
A. 224.0.0.0/24
B. 239.128.0.0/10
C. 239.192.0.0/14
D. 224.0.1.0?38.255.255.255
Answer: D

Juniper certification training   JN0-303   JN0-303 exam dumps   JN0-303 test   JN0-303 test

NO.14 In JUNOS software, which three are valid encapsulation types for CCC? (Choose three.)
A. hdlc-ccc
B. atm-cell-ccc
C. cisco-hdlc-ccc
D. ethernet-vlan-ccc
E. ethernet-snap-ccc
Answer: BCD

Juniper   JN0-303 certification   JN0-303   JN0-303   JN0-303 study guide

NO.15 In what PIM topology would you use MSDP within a single domain?
A. Auto-RP
B. Anycast RP
C. Bootstrap router
D. PIM sparse mode
Answer: B

Juniper   JN0-303 certification training   JN0-303 exam dumps   JN0-303 braindump

NO.16 Which represents a correct PE-PE BGP configuration for an L3 VPN?
A. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
neighbor 192.168.16.1;
}
B. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
any;
}
neighbor 192.168.16.1; }
C. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
unicast;
}
family inet-vpn {
unicast;
neighbor 192.168.16.1;
}
D. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
13-vpn;
}
neighbor 192.168.16.1;
}
Answer: C

Juniper   JN0-303   JN0-303 pdf   JN0-303

NO.17 Which two steps are required for a Kompella Layer 2 VPN? (Choose two.)
A. Configure a site ID for each CE
B. Configure a VPN label for each VPN
C. Configure a MP-BGP session to each PE
D. Configure an Extended LDP Session to each PE
Answer: AC

Juniper dumps   JN0-303 exam simulations   JN0-303

NO.18 In JUNOS software, which type of VPN supports IPX and Appletalk?
A. Martini based VPN's
B. 2547bis based VPN's
C. Sham link based VPN's
D. Virtual Router based VPN's
Answer: A

Juniper certification   JN0-303   JN0-303 original questions   JN0-303 practice test

NO.19 What are three examples of a provider-provisioned VPN supported by JUNOS software? (Choose
three.)
A. L2F
B. PPTP
C. Circuit cross-connect
D. Draft-Martini-based VPNs
E. Draft-Kompella-based VPNs
Answer: CDE

Juniper original questions   JN0-303 demo   JN0-303   JN0-303

NO.20 Which JUNOS software operational-mode command displays the status of a Draft-Martini VPN?
A. show ldp neighbor
B. show martini connections
C. show l2circuit connections
D. show l2vpn connections
Answer: C

Juniper certification training   JN0-303   JN0-303 practice test   JN0-303 dumps

IT-Tests.com offer the latest 000-089 Questions & Answers and high-quality 1z0-593 PDF Practice Test. Our C_TFIN52_66 VCE testing engine and 642-996 study guide can help you pass the real exam. High-quality 70-341 Real Exam Questions can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.it-tests.com/JN0-303.html

Juniper certification JN0-303 exam best training materials

IT-Tests.com IT Certification has years of training experience. IT-Tests.com Juniper JN0-303 exam training materials is a reliable product. IT elite team continue to provide our candidates with the latest version of the JN0-303 exam training materials. Our staff made ​​great efforts to ensure that you always get good grades in examinations. To be sure, IT-Tests.com Juniper JN0-303 exam materials can provide you with the most practical IT certification material.

Those who want to prepare for the IT certification exam are helpless. But they have to do it. So they have restless state of mind. However, With IT-Tests.com Juniper JN0-303 exam training materials, the kind of mentality will disappear. With IT-Tests.com's Juniper JN0-303 exam training materials, you can be brimming with confidence, and do not need to worry the exam. Of course, you can also face the exam with ease. This is not only psychological help, but more importantly, it allows you to pass the exam and to help you get a better tomorrow.

Exam Code: JN0-303

Exam Name: Juniper (Juniper networks Certified internet specialist.m(jncis-m))

We are committed to using IT-Tests.com Juniper JN0-303 exam training materials, we can ensure that you pass the exam on your first attempt. If you are ready to take the exam, and then use our IT-Tests.com Juniper JN0-303 exam training materials, we guarantee that you can pass it. If you do not pass the exam, we can give you a refund of the full cost of the materials purchased, or free to send you another product of same value.

If you choose IT-Tests, success is not far away for you. And soon you can get Juniper certification JN0-303 exam certificate. The product of IT-Tests.com not only can 100% guarantee you to pass the exam, but also can provide you a free one-year update service.

JN0-303 (Juniper networks Certified internet specialist.m(jncis-m)) Free Demo Download: http://www.it-tests.com/JN0-303.html

NO.1 Which multicast mode does Auto-RP require?
A. Link-mode
B. Dense mode
C. Sparse mode D. Sparse-dense mode
Answer: D

Juniper   JN0-303 test answers   JN0-303   JN0-303 questions   JN0-303

NO.2 PE1 has connections to VPN sites that are served by three remote PE routers. How many LSP's must
be established to support 2547bis?
A. an LSP for each local CE device
B. an LSP for each remote PE device
C. an LSP for each remote CE device
D. an LSP for each CE facing interface
Answer: B

Juniper   JN0-303 study guide   JN0-303 answers real questions   JN0-303 test

NO.3 Which represents a correct PE-PE BGP configuration for an L3 VPN?
A. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
neighbor 192.168.16.1;
}
B. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
any;
}
neighbor 192.168.16.1; }
C. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
unicast;
}
family inet-vpn {
unicast;
neighbor 192.168.16.1;
}
D. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
13-vpn;
}
neighbor 192.168.16.1;
}
Answer: C

Juniper   JN0-303 exam   JN0-303 certification

NO.4 An OSPF non-backbone area allows external routes to be flooded within the area. These external
routes are
propagated into other areas. However, external routes from other areas are not allowed to enter this area.
Which type of
OSPF area does this describe?
A. stub area
B. transit area
C. border area
D. not-so-stubby area
Answer: D

Juniper   JN0-303   JN0-303 test questions   JN0-303 original questions   JN0-303

NO.5 What is the Draft-Kompella control plane based on?
A. IGP
B. LDP
C. BGP
D. MPLS
Answer: C

Juniper questions   JN0-303   JN0-303 exam dumps   JN0-303 exam simulations

NO.6 What prevents routing loops when MSDP is configured across multiple domains?
A. PIM-SM
B. Scoping
C. Auto-RP
D. MBGP
Answer: D

Juniper braindump   JN0-303   JN0-303

NO.7 Which two multicast groups support Auto-RP mapping and discovery? (Choose two.)
A. 224.0.0.39
B. 224.0.1.39
C. 224.0.0.40
D. 224.0.1.40
Answer: BD

Juniper   JN0-303 exam prep   JN0-303 pdf   JN0-303

NO.8 In JUNOS software, what is required to redistribute RIP routes into OSPF?
A. Apply an export policy in RIP.
B. Apply an import policy in RIP.
C. Apply an export policy in OSPF.
D. Apply an import policy in OSPF.
Answer: C

Juniper   JN0-303   JN0-303   JN0-303   JN0-303 test questions

NO.9 In JUNOS software, which type of VPN supports IPX and Appletalk?
A. Martini based VPN's
B. 2547bis based VPN's
C. Sham link based VPN's
D. Virtual Router based VPN's
Answer: A

Juniper   JN0-303   JN0-303 exam simulations   JN0-303 test questions   JN0-303 test answers

NO.10 Which two mechanisms control route distribution between PE routers in a 2547bis VPN? (Choose
two.)
A. Site ID
B. Policies
C. Circuit ID
D. Extended communities
Answer: BD

Juniper answers real questions   JN0-303   JN0-303 study guide   JN0-303 certification training

NO.11 Which JUNOS software operational-mode command displays the status of a Draft-Martini VPN?
A. show ldp neighbor
B. show martini connections
C. show l2circuit connections
D. show l2vpn connections
Answer: C

Juniper dumps   JN0-303   JN0-303 certification training

NO.12 Which three RP election mechanisms are available in a PIM-SM domain? (Choose three.)
A. Static
B. Auto-RP
C. Dynamic-RP
D. Bootstrap router
Answer: ABD

Juniper   JN0-303   JN0-303 certification training

NO.13 In JUNOS software, which three are valid encapsulation types for CCC? (Choose three.)
A. hdlc-ccc
B. atm-cell-ccc
C. cisco-hdlc-ccc
D. ethernet-vlan-ccc
E. ethernet-snap-ccc
Answer: BCD

Juniper   JN0-303 practice test   JN0-303

NO.14 In what PIM topology would you use MSDP within a single domain?
A. Auto-RP
B. Anycast RP
C. Bootstrap router
D. PIM sparse mode
Answer: B

Juniper exam dumps   JN0-303   JN0-303 test questions   JN0-303   JN0-303 exam prep   JN0-303 exam

NO.15 Which two steps are required for a Kompella Layer 2 VPN? (Choose two.)
A. Configure a site ID for each CE
B. Configure a VPN label for each VPN
C. Configure a MP-BGP session to each PE
D. Configure an Extended LDP Session to each PE
Answer: AC

Juniper   JN0-303   JN0-303   JN0-303

NO.16 When comparing CPE and provider-provisioned VPNs (PPVPN), which two statements are true?
(Choose two.)
A. CPE VPN's require dedicated VPN aware hardware at customer site, PPVPN does not.
B. PPVPN's require dedicated VPN aware hardware at customer site, CPE VPN's does not.
C. CPE VPN's scale better than PPVPN's as they do not require a per site configuration on the CPE.
D. PPVPN's scale better than CPE VPN's as they do not require a per site configuration on the CPE.
Answer: AD

Juniper original questions   JN0-303   JN0-303 practice test   JN0-303 original questions   JN0-303 braindump   JN0-303 braindump

NO.17 What are three examples of a provider-provisioned VPN supported by JUNOS software? (Choose
three.)
A. L2F
B. PPTP
C. Circuit cross-connect
D. Draft-Martini-based VPNs
E. Draft-Kompella-based VPNs
Answer: CDE

Juniper   JN0-303 exam simulations   JN0-303   JN0-303   JN0-303

NO.18 What is the administrative scoping address range associated with global scope?
A. 224.0.0.0/24
B. 239.128.0.0/10
C. 239.192.0.0/14
D. 224.0.1.0?38.255.255.255
Answer: D

Juniper dumps   JN0-303 exam dumps   JN0-303 exam simulations   JN0-303 dumps   JN0-303 test   JN0-303

NO.19 Which LSA is the Type 10?
A. Router LSA
B. Opaque LSA
C. AS attributes LSA
D. ASBR summary LSA
E. Network summary LSA
Answer: B

Juniper   JN0-303 certification training   JN0-303 demo   JN0-303   JN0-303

NO.20 What are two commands that can be used to configure MBGP for multicast? (choose two)
A. Under the BGP group, configure family inet any
B. Use the set protocol MBGP command to enable MBGP
C. Under the BGP group, configure family inet multicast
D. Use the set rib-group command to copy the multicast routes into inet.1
Answer: AC

Juniper exam   JN0-303   JN0-303   JN0-303 study guide

IT-Tests.com is a website specifically provide the certification exam information sources for IT professionals. Through many reflects from people who have purchase IT-Tests's products, IT-Tests.com is proved to be the best website to provide the source of information about certification exam. The product of IT-Tests.com is a very reliable training tool for you. The answers of the exam exercises provided by IT-Tests.com is very accurate. Our IT-Tests's senior experts are continuing to enhance the quality of our training materials.