显示标签为“JN0-531”的博文。显示所有博文
显示标签为“JN0-531”的博文。显示所有博文

2014年2月19日星期三

JuniperのJN0-531認証の最優秀問題集

JPexamはもっぱらITプロ認証試験に関する知識を提供するのサイトで、ほかのサイト使った人はJPexamが最高の知識源サイトと比較しますた。JPexamの商品はとても頼もしい試験の練習問題と解答は非常に正確でございます。

JPexamが提供したJuniperのJN0-531の試験トレーニング資料は受験生の皆さんの評判を得たのはもうずっと前のことになります。それはJPexamのJuniperのJN0-531の試験トレーニング資料は信頼できるもので、確実に受験生を助けて試験に合格するということを証明しました。JPexamが提供したJuniperのJN0-531の試験トレーニング資料はベストセラーになって、ずっとピアの皆をリードしています。JPexamは消費者の皆さんの許可を得て、評判が良いです。JuniperのJN0-531の認証試験を受けたら、速くJPexamというサイトをクッリクしてください。あなたがほしいものを得ることができますから、ミスしないだけで後悔しないです。最も専門的な、最も注目を浴びるIT専門家になりたかったら、速くショッピングカートに入れましょう。

もしJN0-531認定試験を受験したいなら、JN0-531試験参考書が必要でしょう。ターゲットがなくてあちこち参考資料を探すのをやめてください。どんな資料を利用すべきなのかがわからないとしたら、JPexamのJN0-531問題集を利用してみましょう。この問題集は的中率が高くて、あなたの一発成功を保証できますから。ほかの試験参考書より、この問題集はもっと正確に実際問題の範囲を絞ることができます。こうすれば、この問題集を利用して、あなたは勉強の効率を向上させ、十分にJN0-531試験に準備することができます。

試験番号:JN0-531問題集
試験科目:FWV, Specailist(JNCIS-FWV)
最近更新時間:2014-02-19
問題と解答:全145問
100%の返金保証。1年間の無料アップデート。

あなたはその他のJuniper JN0-531認証試験に関するツールサイトでも見るかも知れませんが、弊社はIT業界の中で重要な地位があって、JPexamの問題集は君に100%で合格させることと君のキャリアに変らせることだけでなく一年間中で無料でサービスを提供することもできます。

JPexamはきみの貴重な時間を節約するだけでなく、 安心で順調に試験に合格するのを保証します。JPexamは専門のIT業界での評判が高くて、あなたがインターネットでJPexamの部分のJuniper JN0-531資料を無料でダウンロードして、弊社の正確率を確認してください。弊社の商品が好きなのは弊社のたのしいです。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/JN0-531_exam.html

NO.1 You create a policy-based VPN, and select an address group for the source address.
What will be the source component of the proxy-id seen by the remote security gateway?
A. the default 0.0.0.0/0
B. the last member of the address group
C. the first member of the address group
D. the subnet that contains all addresses in the address group
Answer: A

Juniper   JN0-531   JN0-531

NO.2 To which three ScreenOS components can a policy-based routing policy be bound? (Choose three.)
A. zone
B. policy
C. interface
D. virtual router
E. virtual system
Answer: ACD

Juniper   JN0-531認定試験   JN0-531   JN0-531   JN0-531   JN0-531

NO.3 What should you configure to insure an HA cable failure does not result in both devices attempting to
become master?
A. failover count
B. secondary path
C. monitor threshold
D. heartbeat threshold
Answer: B

Juniper認証試験   JN0-531   JN0-531練習問題   JN0-531

NO.4 What do you need to change in your VPN configuration to use certificates for authentication?
A. Replace the preshared key with the certificate name.
B. Select PFS in Phase 2, then select the certificate to be used.
C. Use a custom set of Phase 1 proposals, all beginning with rsa-.
D. Use a custom set of Phase 2 proposals, all beginning with rsa-.
Answer: C

Juniper   JN0-531   JN0-531

NO.5 Which item in a virtual system is shared by default?
A. trust zone in the trust-vr
B. trust zone in the untrust-vr
C. untrust zone in the trust-vr
D. untrust zone in the untrust-vr
Answer: C

Juniper   JN0-531参考書   JN0-531認証試験

NO.6 What will happen if you type the command unset protocol vrouter trust-vr protocol ospf?
A. OSPF stops running, but the OSPF configuration is left intact.
B. All OSPF configuration parameters are removed from the vrouter only.
C. All OSPF configuration parameters are removed from all interfaces in the vrouter.
D. All OSPF configuration parameters are removed from the vrouter and from all interfaces in the vrouter.
Answer: D

Juniper   JN0-531   JN0-531練習問題   JN0-531過去問   JN0-531参考書

NO.7 A VPN tunnel that uses a CA certificate will not become active.
What would be causing this problem?
A. The CA certificate has been revoked.
B. The devices are not synced with the NTP server.
C. The device certificates were generated before the CRL was downloaded thus making them invalid.
D. The CRL has been downloaded, but the certificates have a CDP extension thus making them invalid.
Answer: B

Juniper   JN0-531問題集   JN0-531   JN0-531   JN0-531認証試験

NO.8 Which ScreenOS CLI command is necessary for configuring IGMP on interface ethernet0/1?
A. set igmp interface ethernet0/1
B. set multicast interface ethernet0/1
C. set interface ethernet0/1 igmp router
D. set igmp interface ethernet0/1 enable
Answer: C

Juniper   JN0-531   JN0-531   JN0-531問題集   JN0-531認定証

NO.9 Which three statements are true regarding IKE Phase 1? (Choose three.)
A. Placing the SA proposal list in message 1 is an option.
B. The digital certificate is used to decrypt the session key.
C. The DH key exchange is used to validate the session key.
D. The DH key exchange and digital certificates are both optional.
E. The proxy-id is used to determine which SA is referenced for the VPN.
Answer: ABC

Juniper問題集   JN0-531認定証   JN0-531参考書   JN0-531参考書   JN0-531参考書

NO.10 Click the Exhibit button.
In the exhibit, the route-based VPN on the SSG 5 needs to configured to allow access only from your PC
to Server G. The SSG 550 is configured with a policy-based VPN from Server G to your PC's host
address.
Assume the gateways are static.
Which proxy-id must be configured?
A. Local: 10.0.0.5/24Remote: 20.0.0.5/24
B. Local: 10.0.0.5/32Remote: 20.0.0.5/32
C. Local: 1.1.1.250/32Remote: 4.4.4.250/32
D. Local: 1.1.1.250/24Remote: 4.4.4.250/24
Answer: B

Juniper   JN0-531   JN0-531認証試験   JN0-531

NO.11 How many tunnels would need to be created to build a full mesh between 10 VPN devices?
A. 10
B. 20
C. 45
D. 100
Answer: C

Juniper   JN0-531   JN0-531参考書   JN0-531   JN0-531認証試験

NO.12 What must be enabled to protect Phase 2 key exchanges?
A. Phase 1 PFS
B. Phase 2 SHA
C. Phase 2 3-DES
D. Phase 2 DH key exchange
Answer: D

Juniper   JN0-531   JN0-531認証試験

NO.13 Which CLI command identifies the multicast sources visible to your ScreenOS device?
A. get route pim
B. get igmp source all
C. exec pim interface all query
D. get vrouter trust-vr protocol pim
Answer: D

Juniper練習問題   JN0-531認定証   JN0-531   JN0-531   JN0-531

NO.14 You have implemented a hub and spoke VPN. On the hub, there are two tunnel interfaces, one to
each spoke. Both tunnel interfaces are in the same zone.
Which two configuration options will control traffic between the spokes? (Choose two.)
A. Configure the common zone to block inter-zone traffic.
B. Configure the common zone to block intra-zone traffic.
C. Configure each tunnel interface to block intra-zone traffic.
D. Configure one of the tunnel interfaces in a different zone a set policies.
Answer: BD

Juniper   JN0-531   JN0-531   JN0-531参考書   JN0-531   JN0-531

NO.15 Click the Exhibit button.
In the exhibit, the hub and spoke VPN uses route-based VPNs.
What is the minimum number of policy rules required to establish full, bi-directional communications
between all locations?
A. 0
B. 3
C. 4
D. 6
Answer: A

Juniper   JN0-531   JN0-531

NO.16 A VPN tunnel that uses a CA certificate has failed Phase 1 negotiations. The peer's certificate has
been rejected.
What would be causing this problem?
A. The CA certificate has been revoked.
B. One of the peering devices are not synced with the NTP server.
C. The device certificates were generated before the CRL was downloaded thus making them invalid.
D. The CRL has been downloaded, but the certificates have a CDP extension thus making them invalid.
Answer: B

Juniper   JN0-531   JN0-531   JN0-531認証試験

NO.17 Which two statements are true regarding the use of dialup VPNs? (Choose two.)
A. They are initiated only by the remote host PC.
B. They can only be connected to the trust zone on a ScreenOS device.
C. They are configured so that the first IKE message will always have the SA proposal list.
D. They can be used as an alternative to connect remote users when a ScreenOS device has reached the
maximum number of LAN-to-LAN tunnels.
Answer: AC

Juniper認証試験   JN0-531   JN0-531

NO.18 Which command will show address translation for sessions that have ended?
A. snoop
B. get session
C. get log traffic
D. get dbuf stream
Answer: C

Juniper過去問   JN0-531認証試験   JN0-531過去問   JN0-531練習問題

NO.19 Your ScreenOS device has come under a SYN flood attack. In the logs, which severity level would you
search to see this event?
A. Alert
B. Critical
C. Warning
D. Emergency
Answer: D

Juniper   JN0-531練習問題   JN0-531   JN0-531認定証   JN0-531

NO.20 Which two item pairs are exchanged during Phase 2 negotiations? (Choose two.)
A. proxy-id, SA proposal list
B. IKE cookie, SA proposal list
C. hash [ID + Key], DH key exchange
D. SA proposal list, optional DH key exchange
Answer: AD

Juniper参考書   JN0-531参考書   JN0-531練習問題   JN0-531

NO.21 Which two statements regarding NHTB are correct? (Choose two.)
A. If the spoke device is not a ScreenOS device, manual configuration of NHTB is required on the hub.
B. If the spoke device is not a ScreenOS device, manual configuration of NHTB is required on the spoke.
C. When configuring routing on a spoke device with one tunnel interface the route to the tunnel interface
does not require a routing gateway address.
D. When configuring routing on a hub device with one tunnel interface terminating multiple VPN spokes,
the route to the tunnel interface does not require a routing gateway address.
Answer: AC

Juniper認証試験   JN0-531認定証   JN0-531参考書   JN0-531

NO.22 Click the Exhibit button.
In the exhibit, the hub and spoke VPN uses route-based VPNs and has intra-zone blocking enabled on
the Evil zone.
What is the minimum number of policy rules required to establish full, bi-directional communications
between all locations?
A. 3
B. 4
C. 6
D. 7
Answer: D

Juniper   JN0-531問題集   JN0-531   JN0-531

NO.23 Click the Exhibit button.
In the exhibit, what is the source IP address of the multicast traffic?
A. 236.1.1.1
B. 10.10.10.1
C. 20.20.20.10
D. 20.20.20.200
Answer: B

Juniper   JN0-531   JN0-531   JN0-531   JN0-531

NO.24 Which command is used to verify that IGMP is running correctly?
A. get route igmp
B. get igmp query
C. set igmp query interface e0/1
D. exec igmp interface e0/1 query
Answer: D

Juniper   JN0-531   JN0-531参考書

NO.25 You have configured the following on your device.
The VPN is not working properly. What is the problem?
A. The policy needs to have the action tunnel.
B. The VPN needs to be bound to the tunnel interface.
C. The tunnel interface needs to be placed in the trust zone.
D. The tunnel interface needs to be associated with the interface in the untrust zone.
Answer: B

Juniper認定資格   JN0-531   JN0-531過去問   JN0-531

NO.26 What must be configured differently for a route-based VPN and a policy-based VPN?
A. proxy-id
B. proposals
C. remote gateway type
D. binding the tunnel interface
Answer: D

Juniper   JN0-531   JN0-531   JN0-531過去問

NO.27 You have created a VPN to a dynamic peer.
Which two configured parameters must match? (Choose two.)
A. static side peer-id
B. dynamic side local-id
C. static side IP address
D. dynamic side IP address
Answer: AB

Juniper   JN0-531参考書   JN0-531問題集   JN0-531認定証   JN0-531   JN0-531

NO.28 Which three items do you need to download and install on your ScreenOS device for IKE gateways to
be able to use digital certificates without OCSP? (Choose three.)
A. the CRL list
B. the SCEP list
C. a local certificate
D. the CA public key certificate
E. the CA private key certificate
Answer: ACD

Juniper   JN0-531   JN0-531   JN0-531   JN0-531認定証

NO.29 Which two statements are correct regarding NHTB? (Choose two.)
A. The NHTB table can be viewed with the command get nhtb.
B. The NHTB table can be viewed with the command get interface <tunnel interface>.
C. The NHTB table can be viewed with the command get interface <physical interface>.
D. NHTB is enabled automatically when multiple VPNs are bound to a single tunnel interface.
Answer: BD

Juniper   JN0-531認証試験   JN0-531   JN0-531

NO.30 During main mode negations a failure has occurred while using IKE certificates.
Which message pair would you review to troubleshoot this failure?
A. messages 1 & 2
B. messages 2 & 3
C. messages 3 & 4
D. messages 5 & 6
Answer: D

Juniper認定証   JN0-531   JN0-531認証試験   JN0-531認証試験   JN0-531

JPexamは最新の000-089問題集と高品質の70-466問題と回答を提供します。JPexamのICYB VCEテストエンジンとHP2-N37試験ガイドはあなたが一回で試験に合格するのを助けることができます。高品質の1Y0-250 PDFトレーニング教材は、あなたがより迅速かつ簡単に試験に合格することを100%保証します。試験に合格して認証資格を取るのはそのような簡単なことです。

記事のリンク:http://www.jpexam.com/JN0-531_exam.html

2013年12月24日星期二

Juniper JN0-531 JN0-130 JN0-303 JN0-140認定試験に適する最高の問題集を捧げる

他の人の成功を見上げるよりも、自分の成功への努力をしたほうがよいです。JPexamのJuniperのJN0-531 JN0-130 JN0-303 JN0-140試験トレーニング資料はあなたの成功への第一歩です。この資料を持っていたら、難しいJuniperのJN0-531 JN0-130 JN0-303 JN0-140認定試験に合格することができるようになります。あなたは新しい旅を始めることができ、人生の輝かしい実績を実現することができます。

JPexamの商品は100%の合格率を保証いたします。JPexamはITに対応性研究続けて、高品質で低価格な問題集が開発いたしました。JPexamの商品の最大の特徴は20時間だけ育成課程を通して楽々に合格できます。

今の多くのIT者が参加している試験に、JuniperのJN0-531 JN0-130 JN0-303 JN0-140認定試験がとても人気がある一つとして、合格するために豊富な知識と経験が必要です。JuniperのJN0-531 JN0-130 JN0-303 JN0-140認定試験に準備する練習ツールや訓練機関に通学しなればまりませんでしょう。JPexamは君のもっともよい選択ですよ。多くIT者になりたい方にJuniperのJN0-531 JN0-130 JN0-303 JN0-140認定試験に関する問題集を準備しております。君に短い時間に大量のITの専門知識を補充させています。

アンケート調査によると、IT業種の皆さんが現在最も受験したい認定試験はJuniperのJN0-531 JN0-130 JN0-303 JN0-140試験だそうです。確かに、この試験はとても大切な試験で、公的に認可されたものです。しかも、この認定資格があなたが高い技能を身につけていることも証明できます。しかしながら、試験の大切さと同じ、この試験も非常に難しいです。試験に合格するのは少し大変ですが、心配しないでくださいよ。JPexamはあなたに難しいJN0-531 JN0-130 JN0-303 JN0-140認定試験に合格することを助けてあげますから。

試験番号:JN0-531問題集
試験科目:FWV, Specailist(JNCIS-FWV)
最近更新時間:2013-12-24
問題と解答:全145問
100%の返金保証。1年間の無料アップデート。

試験番号:JN0-130問題集
試験科目:Juniper networks Certified internet specialist.e(jncis-e)
最近更新時間:2013-12-24
問題と解答:全128問
100%の返金保証。1年間の無料アップデート。

試験番号:JN0-303問題集
試験科目:Juniper networks Certified internet specialist.m(jncis-m)
最近更新時間:2013-12-24
問題と解答:全150問
100%の返金保証。1年間の無料アップデート。

試験番号:JN0-140問題集
試験科目:Certified Internet Associate (JNCIA-AC) 140 Exam
最近更新時間:2013-12-24
問題と解答:全120問
100%の返金保証。1年間の無料アップデート。

購入前にお試し,私たちの試験の質問と回答のいずれかの無料サンプルをダウンロード:http://www.jpexam.com/JN0-130_exam.html

NO.1 Which CLI command displays the VRFs that are operational within each virtual router?
A. show vir
B. show ip vrf
C. show vrf vir
D. show mpls vrf
Answer: A

Juniper   JN0-130認定資格   JN0-130練習問題   JN0-130練習問題   JN0-130

NO.2 Is the IS-IS Designated Intermediate System (DIS) election process called Deterministic or Static and
why?
A. It is Static. If the priorities are equal for a new neighbor and the current DIS only.
B. It is Deterministic. If the well-known pseudonode and system ID is configured on the new neighbor only.
C. It is Deterministic. When a new router appears on a multi-access network with a higher priority value, it
is elected as the DIS.
D. It is Static. When a new intermediate system powers up on a multi-access network, even if it has a
higher priority, it may become a backup DIS.
Answer: C

Juniper認定試験   JN0-130   JN0-130   JN0-130

NO.3 Which message type is used to initiate an RSVP-TE label switched path?
A. path
B. resv
C. setup
D. session
Answer: A

Juniper   JN0-130   JN0-130参考書

NO.4 Which two BGP attributes are incorporated for loop prevention within an AS using a route reflection
configuration? (Choose two.)
A. AS Path
B. Next Hop
C. Cluster List
D. Originator ID
Answer: CD

Juniper   JN0-130   JN0-130   JN0-130認定資格

NO.5 Which CLI command is used to set a Privileged Exec password of mypassword?
A. enable password 0 mypassword
B. enable password 3 mypassword
C. enable password 5 mypassword
D. enable password 10 mypassword
Answer: A

Juniper過去問   JN0-130参考書   JN0-130練習問題   JN0-130認証試験   JN0-130問題集

NO.6 Which CLI command disconnects all subscribers on an ATM PVC?
A. clear port 4/3.99
B. logout port 4/3.99
C. clear subscriber port 4/3.99
D. logout subscriber port 4/3.99
Answer: D

Juniper   JN0-130   JN0-130認定証

NO.7 Which two types of routes may be advertised via EBGP? (Choose two.)
A. Routes that do not originate in the local AS and are learned by OSPF.
B. Routes that originate on the local router and are advertised into OSPF.
C. Routes that are transiting the local router and are BGP learned routes.
D. Routes that originate on the local router and are injected using a route map.
Answer: CD

Juniper認定証   JN0-130   JN0-130

NO.8 Which two services protect the ERX Edge Router from unauthorized CLI logins?
A. IPSec
B. SecureID
C. local passwords
D. default IP policy
E. RADIUS authentication
Answer: CE

Juniper   JN0-130   JN0-130   JN0-130   JN0-130認定証
16. Your ERX Edge Router is constantly going to a boot## prompt.
What is the most likely cause for this condition?
A. bad SRP
B. low voltage
C. bad mid-plane
D. corrupted flash
Answer: D

Juniper   JN0-130練習問題   JN0-130   JN0-130
17. Which sequence of events describes the order used to restore normal router operation after
experiencing a corrupted flash?
A. initialize flash, reload, copy new system files from FTP server
B. reload, copy new system files from FTP server, initialize flash
C. initialize flash, copy new system files from FTP server, reload
D. reload, initialize flash, copy new system files from FTP server
Answer: C

Juniper   JN0-130   JN0-130
18. You are trying to recover from a corrupted flash.
Which configuration command configures an IP address of 192.168.1.1/24 on the SRP management
interface when the ERX1400 router is at the boot## prompt?
A. ip address 192.168.1.1/24
B. ip address 192.168.1.1 subnetmask 24
C. ip address 192.168.1.1 255.255.255.0
D. ip address 192.168.1.1 mask 255.255.255.0
Answer: C

Juniper   JN0-130   JN0-130練習問題   JN0-130認定証
19. What describes the functionality of NTP when using multiple virtual routers?
A. All virtual routers can act as NTP clients and servers.
B. Only one virtual router can act as an NTP client and a server.
C. Only one virtual router can act as an NTP server but all can be clients.
D. Only one virtual router can act as an NTP client but all can be servers.
Answer: D

Juniper   JN0-130   JN0-130参考書   JN0-130練習問題   JN0-130
20. Which configuration command is used to make the ERX Edge Router an NTP server?
A. set ntp-server
B. set ntp server
C. ntp-server enable
D. ntp server enable
Answer: D

Juniper問題集   JN0-130   JN0-130認定証   JN0-130
21. Which configuration command allows a virtual router to receive updates from a configured NTP
source?
A. ntp enable
B. enable ntp
C. set ntp-client
D. enable ntp-client
Answer: A

Juniper   JN0-130参考書   JN0-130認定試験
22. Which configuration command is used to send debug level events to the console in real time?
A. log here severity debug
B. log destination console severity debug
C. log severity debug destination console
D. log realtime destination console severity debug
Answer: B

Juniper認定資格   JN0-130認証試験   JN0-130過去問   JN0-130   JN0-130認定試験
23. Which command initiates a packet trace for all PPP packets on interface atm 6/1.33 ?
A. log filter debug pppPacket atm 6/1.33
B. log severity debug pppPacket atm 6/1.33
C. log filter debug category pppPacket atm 6/1.33
D. log severity debug category pppPacket atm 6/1.33
Answer: B

Juniper参考書   JN0-130   JN0-130認証試験
24. Log messages are appearing very quickly on the console of your ERX Edge Router.
Which Privileged Exec command disables real-time console logging?
A. no log here
B. no log console
C. destination console severity 7
D. destination console logging off
Answer: A

Juniper   JN0-130   JN0-130
25. Which two configuration commands are required to direct debug level console logging to your current
ERX Edge Router Telnet session? (Choose two.)
A. log here
B. log telnet here
C. log destination console severity 7
D. log destination telnet severity debug
Answer: AC

Juniper参考書   JN0-130   JN0-130   JN0-130認定資格
26. A log filter of log severity DEBUG pppPacket ATM 4/3.66 is configured within the category of
pppPacket.
Which configuration command removes this specific log filter?
A. no log severity pppPacket
B. no log severity debug pppPacket
C. no log severity pppPacket atm 4/3.66
D. no log severity debug pppPacket 4/3.66
Answer: C

Juniper認定証   JN0-130認証試験   JN0-130参考書
27. Which configuration command removes all log filters currently configured on the ERX Edge Router?
A. no log here
B. no log fields
C. no log filters
D. no log severity
Answer: C

Juniper問題集   JN0-130   JN0-130認定証   JN0-130
28. Which three statements describe macros on the ERX Edge Router? (Choose three.)
A. They prompt users for input.
B. They cannot prompt users for input.
C. They can be created on the router itself.
D. They are an embedded programming language.
E. They can be created on the user's workstation.
Answer: ADE

Juniper   JN0-130過去問   JN0-130認定証   JN0-130認証試験
29. Which command is used to execute a macro called setup.mac ?
A. macro setup
B. macro setup.mac
C. run macro setup
D. run macro setup.mac
Answer: B

Juniper過去問   JN0-130認証試験   JN0-130   JN0-130   JN0-130   JN0-130参考書
30. Which control expression must be the last line in all macros?
A. <# end #>
B. <# finish #>
C. <# endtmpl #>
D. <# terminate #>
Answer: C

Juniper参考書   JN0-130問題集   JN0-130認定資格   JN0-130認定証   JN0-130認定証

NO.9 Which configuration command places interfaces whose IP addresses are between 192.168.0.0 and
192.168.255.255 into OSPF area 0?
A. network 192.168.0.0 255.255.0.0 area 0.0.0.0
B. network 192.168.0.0 0.0.255.255 area 0.0.0.0
C. area 0.0.0.0 network 192.168.0.0 255.255.0.0
D. area 0.0.0.0 network 192.168.0.0 0.0.255.255
Answer: B

Juniper   JN0-130認定試験   JN0-130

NO.10 In a Bridged 1483 network, which set of commands is used to configure an ATM subinterface?
A. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip address unnumbered loopback0
B. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
description Company-XYZ
encapsulation bridge1483
ip unnumbered loopback0
C. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip address unnumbered loopback0
D. interface atm 6/0.33
atm pvc 33 0 33 aal5snap
encapsulation bridge1483
description Company-XYZ
ip unnumbered loopback0
Answer: D

Juniper認定試験   JN0-130   JN0-130認定試験   JN0-130練習問題   JN0-130認定資格

NO.11 Which three statements are true regarding the DHCP Internal Server? (Choose three.)
A. Can be in remote-access mode.
B. Can be in equal-access mode.
C. Can be in standalone mode.
D. Standalone mode is the default.
E. Equal-access mode is the default.
Answer: BCE

Juniper   JN0-130   JN0-130問題集   JN0-130   JN0-130過去問

NO.12 Which three statements about Label-Switched Paths (LSPs) are true? (Choose three.)
A. LSPs are bidirectional.
B. LSPs are unidirectional.
C. LSPs can be signaled by CAC.
D. LSPs can be configured explicitly.
E. LSPs can be configured dynamically.
Answer: BDE

Juniper   JN0-130   JN0-130認証試験

NO.13 Why would you make a non-backbone area a stub or not-so-stubby area?
A. to aggregate routes learned from the ABR
B. to lower the cost of routes advertised by the ABR
C. to connect a non-contiguous area to the backbone
D. to decrease the size of the link-state database in that area
Answer: D

Juniper   JN0-130問題集   JN0-130

NO.14 You would like to view all Fast Ethernet interfaces currently using VLAN tagging and the specific VLANs
each interface is using.
Which CLI command displays this information?
A. show fast interface
B. show vlan interface
C. show vlan subinterface
D. show fast interface vlan
Answer: C

Juniper   JN0-130   JN0-130   JN0-130問題集

NO.15 Which CLI command displays the status of a PPP over Ethernet subinterface?
A. show pppoe interface
B. show ppp int state up
C. show ip interface brief
D. show pppoe subinterface
Answer: D

Juniper練習問題   JN0-130問題集   JN0-130認証試験   JN0-130認定証   JN0-130参考書   JN0-130