Dear candidates, have you thought to participate in any CheckPoint 156-915.1 exam training courses? In fact, you can take steps to pass the certification. IT-Tests.com CheckPoint 156-915.1 exam training materials bear with a large number of the exam questions you need, which is a good choice. The training materials can help you pass the certification.
In this competitive society, being good at something is able to take up a large advantage, especially in the IT industry. Gaining some IT authentication certificate is very useful. CheckPoint 156-915.1 is a certification exam to test the IT professional knowledge level and has a Pivotal position in the IT industry. While CheckPoint 156-915.1 exam is very difficult to pass, so in order to pass the CheckPoint certification 156-915.1 exam a lot of people spend a lot of time and effort to learn the related knowledge, but in the end most of them do not succeed. Therefore IT-Tests.com is to analyze the reasons for their failure. The conclusion is that they do not take a pertinent training course. Now IT-Tests.com experts have developed a pertinent training program for CheckPoint certification 156-915.1 exam, which can help you spend a small amount of time and money and 100% pass the exam at the same time.
CheckPoint 156-915.1 authentication certificate is the dream IT certificate of many people. CheckPoint certification 156-915.1 exam is a examination to test the examinees' IT professional knowledge and experience, which need to master abundant IT knowledge and experience to pass. In order to grasp so much knowledge, generally, it need to spend a lot of time and energy to review many books. IT-Tests.com is a website which can help you save time and energy to rapidly and efficiently master the CheckPoint certification 156-915.1 exam related knowledge. If you are interested in IT-Tests, you can first free download part of IT-Tests's CheckPoint certification 156-915.1 exam exercises and answers on the Internet as a try.
Some sites provide CheckPoint 156-915.1 exam study materials on the Internet , but they do not have any reliable guarantee. Let me be clear here a core value problem of IT-Tests.com . All CheckPoint exams are very important. In this era of rapid development of information technology, IT-Tests.com just questions provided by one of them. Why do most people choose IT-Tests.com? This is because the exam information provided by IT-Tests.com will certainly be able to help you pass the exam. Why? Because it provides the most up-to-date information, which is the majority of candidates proved by practice.
Exam Code: 156-915.1
Exam Name: CheckPoint (Accelerated CCSE 1.1 NGX)
IT-Tests.com is a website that specializes in providing IT exam information. The pass rate can achieve 100%. Which is one of the reasons that most candidates willing to believe the IT-Tests.com. IT-Tests.com have been always concerned about the needs of the majority of candidates. We always with the greatest ability to meet the needs of the candidates . IT-Tests.com's CheckPoint 156-915.1 exam training materials is an unprecedented IT certification training materials. With it, your future career will be rain or shine.
IT-Tests.com CheckPoint 156-915.1 exam questions and answers provide you test preparation information with everything you need. About CheckPoint 156-915.1 exam, you can find these questions from different web sites or books, but the key is logical and connected. Our questions and answers will not only allow you effortlessly through the exam first time, but also can save your valuable time.
CheckPoint certification 156-915.1 exams has a pivotal position in the IT industry, and I believe that a lot of IT professionals agree with it. Passing CheckPoint certification 156-915.1 exam has much difficulty and needs to have perfect IT knowledge and experience. Because after all, CheckPoint certification 156-915.1 exam is an authoritative test to inspect examinees' IT professional knowledge. If you have got a CheckPoint 156-915.1 certification, your IT professional ability will be approved by a lot of IT company. IT-Tests.com also has a pivotal position in IT training industry. Many IT personnels who have passed CheckPoint certification 156-915.1 exam used IT-Tests's help to pass the exam. This explains why IT-Tests's pertinence training program is very effective. If you use the training material we provide, you can 100% pass the exam.
156-915.1 (Accelerated CCSE 1.1 NGX) Free Demo Download: http://www.it-tests.com/156-915.1.html
NO.1 Your VPN Community includes three Security Gateways. Each Gateway has its own internal network
defined as a VPN Domain. You must test the VPN-1 NGX route-based VPN feature, without stopping the
VPN. What is the correct order of steps?
A.1. Add a new interface on each Gateway. 2. Remove the newly added network from the current VPN
Domain for each Gateway. 3. Create VTIs on each Gateway, to point to the other two peers 4. Enable
advanced routing on all three Gateways.
B.1. Add a new interface on each Gateway. 2. Remove the newly added network from the current VPN
Domain in each gateway object. 3. Create VPN Tunnel Interfaces (VTI) on each gateway object, to point
to the other two peers. 4. Add static routes on three Gateways, to route the new network to each peer"s
VTI interface.
C.1. Add a new interface on each Gateway. 2. Add the newly added network into the existing VPN
Domain for each Gateway. 3. Create VTIs on each gateway object, to point to the other two peers. 4.
Enable advanced routing on all three Gateways.
D.1. Add a new interface on each Gateway. 2. Add the newly added network into the existing VPN
Domain for each gateway object. 3. Create VTIs on each gateway object, to point to the other two peers.
4. Add static routes on three Gateways, to route the new networks to each peer's VTI interface.
Answer:B
CheckPoint practice test 156-915.1 dumps 156-915.1 test 156-915.1 exam dumps 156-915.1 exam prep
NO.2 Which Check Point QoS feature allows a Security Administrator to define special classes of service for
delay-sensitive applications?
A.Weighted Fair Queuing
B.Limits
C.Differentiated Services
D.Low Latency Queueing
E.Guarantees
Answer:D
CheckPoint test questions 156-915.1 156-915.1 156-915.1 original questions 156-915.1 pdf
NO.3 Eric wants to see all URLs' full destination paths in the SmartView Tracker logs, not just the fully
qualified domain name of the Web servers. For example, the information filed of a log entry displays the
URL http: //hp.msn.com/css/home/hpcl1012.css. How can Eric best customize SmartView Tracker to see
the logs he wants? Configure the URI resource, and select:
A."transparent" as the connection method
B."tunneling" as the connection method
C."optimize URL logging"; use the URI resource in the rule, with action "accept"
D."Enforce URL capability"; use the URI resource in the rule, with action "accept"
Answer:C
CheckPoint original questions 156-915.1 156-915.1 156-915.1 certification training
NO.4 When Load Sharing Multicast mode is defined in a ClusterXL cluster object, how are packets being
handled by cluster members?
A.All cluster members process all packets, and members synchronize with each other.
B.All members receive all packets. The SmartCenter Server decides which member will process the
packets. Other members simply drop the packets.
C.Only one member at a time is active. The active cluster member processes all packets.
D.All members receive all packets. An algorithm detemines which member processes packets, and which
member drops packets.
Answer:D
CheckPoint braindump 156-915.1 156-915.1 exam 156-915.1 original questions
NO.5 What is the command to see the licenses of the Security Gateway FWDALLAS from your SmartCenter
Server?
A.cprlic print FWDALLAS
B.fw licprint FWDALLAS
C.fw tab -t fwlic FWDALLAS
D.cplic print FWDALLAS
E.fw lic print FWDALLAS
Answer:A
CheckPoint 156-915.1 dumps 156-915.1 dumps 156-915.1
NO.6 In SmartView Tracker, which rule shows when a packet is dropped due to anti-spoofing?
A.Rule 0
B.Cleanup Rule
C.Rule 1
D.Rule 999
E.Stealth Rule
Answer:A
CheckPoint questions 156-915.1 156-915.1 156-915.1 demo 156-915.1
NO.7 In a Management High Availablility (HA) configuration, you can configure synchronization to occur
automatically, when: 1. The Security Policy is installed. 2. The Security Policy is saved. 3. The Security
Administrator logs in to the secondary SmartCenter Server, and changes its status to active. 4. A
scheduled event occurs. 5. The user database is installed. Select the BEST response for the
synchronization sequence. Choose one.
A.1,2,3
B.1,2,3,4
C.1,3,4
D.1,2,5
E.1,2,4
Answer:E
CheckPoint 156-915.1 156-915.1
NO.8 You are preparing to configure your VoIP Domain Gatekeeper object. Which two other objects should
you have created first?
A.An object to represent the IP phone network, AND an object to represent the host on which the proxy is
installed.
B.An object to represent the PSTN phone network, AND an object to represent the IP phone network
C.An object to represent the IP phone network, AND an object to represent the host on which the
gatekeeper is installed.
D.An object to represent the Q.931 service origination host. AND an object to represent the H.245
termination host.
E.An object to represent the call manager. AND an object to represent the host on which the transmission
router is installed.
Answer:C
CheckPoint 156-915.1 test answers 156-915.1 156-915.1 demo
NO.9 You are reviewing SmartView Tracker entries, and see a Connection Rejection on a Check Point QoS
rule. What causes the Connecion Rejection?
A.No QoS rule exists to match the rejected traffic.
B.The number of guaranteed connections is exceeded. The rule's action properties are not set to accept
additional connections.
C.The Constant Bit Rate for a Low Latency Class has been exceeded by greater than 10%, and the
Maximal Delay is set below requirements.
D.Burst traffic matching the Default Rule is exhausting the Check Point QoS global packet buffers.
E.The guarantee of one of the rule??s sub-rules exceeds the guarantee in the rule itself.
Answer:B
CheckPoint 156-915.1 156-915.1 test answers 156-915.1 156-915.1
NO.10 Your NGX Enterprise SmartCenter Server is working normally. However, you must reinstall the
SmartCenter Server, but keep the SmartCenter Server configuration (for example, all Security Policies,
database, etc.) How would you reinstall the Server and keep its configuration?
A.1.Run the latest upgrade_export utility to export the configuration 2.Keep the exported file in the same
location. 3.Use SmartUpdate to reinstall the SmartCenter Server. 4.Run upgrade_import to import the
configuration.
B.1.Run the latest upgrade_export utility to export the configuration 2.Leave the exported. tgz file in
$ FWDIR. 3.Install the primary SmartCenter Server on top of the configuration 4.Run upgrade_import to
import the configuration.
C.1. Insert the NGX CD-ROM, and select the option to export the configuration into a.tgz file 2. Transfer
the .tgz fiel to another networked maching. 3. Uninstall all NGX packages, and reboot. 4. Use the NGX
CD-ROM to select the upgrade_import option to import the configuration.
D.1. Download the latest upgrade_export utility, and run it from $FWDIR\bin to export the confirguration
into a.tgz file. 2. Transfer the .tgz file to another network machine. 3. Uninstall all NGX packages and
reboot. 4. Install a new primary SmartCenter Server. 5. Run upgrade_import to import the configuration
Answer:D
CheckPoint demo 156-915.1 156-915.1 certification training 156-915.1 questions 156-915.1 certification
NO.11 How can you unlock an administrator's account, which was been locked due to SmartCenter Access
settings in Global Properties?
A.Type fwm lock_admin -ua from the command line of the SmartCenter Server.
B.Clear the "locked" box of the user's General Properties in SmartDashboard.
C.Type fwm unlock_admin -ua from the command line of the SmartCenter Server
D.Type fwm unlock_admin -ua from the command line of the Security Gateway.
E.Delete the file admin.lock in the $FWDIR/tmp/directory of the SmartCenter Server.
Answer:A
CheckPoint exam dumps 156-915.1 156-915.1
NO.12 Your organization's security infrastructure separates Security Gateways geographically. You must
request a central license for one remote Security Gateway. How would you request and apply the license?
Request a central license:
A.using the remote Gateway's IP address. Apply the license locally with the cplic put command.
B.for the Gateways' IP address. Apply the license on the SmartCenter Server with the cprlic put command.
C.using the remote Gateway's IP address. Attach the license to the remote Gateway via SmartUpdate.
D.using your SmartCenter Server's IP address. Attach the license to the remote Gateway via
SmartUpdate.
E.using the SmartCenter Server's IP address. Apply the license locally on the remote Gateway with the
cplic put command.
Answer:D
CheckPoint exam 156-915.1 156-915.1 exam 156-915.1 156-915.1
NO.13 How can you reset Secure Internal Communications (SIC) between a SmartCenter Server and
Security Gateway?
A.From the SmartCenter Server's command line type fw putkey -p .
B.From the SmartCenter Server's command line type fw putkey -p .
C.Run the command fwm sic_reset to reinitialize the Internal Certificate Authority (ICA) of the
SmartCenter Server. Then retype the activation key on the Security Gateway from SmartDashboard.
D.From cpconfig on the SmartCenter Server, choose the Secure Internal Communication option and
retype the activation key.Next, retype the same key in the gateway object in SmartDashboard and
reinitialize Secure Internal Communications (SIC).
E.Use SmartUpdate to retype the activation key of the Security Gateway.
Answer:D
CheckPoint exam prep 156-915.1 156-915.1 test questions 156-915.1 156-915.1 exam dumps 156-915.1
NO.14 When restoring NGX using the upgrade_import command, which of the following items are NOT
restored?
A.Security Policies
B.Global properties
C.Licenses
D.User groups
E.Route tables
Answer:E
CheckPoint demo 156-915.1 156-915.1 156-915.1
NO.15 After importing the NGX schema into an LDAP server, what should you enable? Schema checking
A.Encryption
B.UserAuthority
C.ConnectControl
D.Secure Internal Communications
Answer:A
CheckPoint 156-915.1 156-915.1 certification training 156-915.1 answers real questions 156-915.1 answers real questions 156-915.1 exam dumps
NO.16 Nelson is a consultant. He is at a customer's site reviewing configuration and logs as part of a security
audit. Nelson sees logs accepting POP3 traffuc, but he does not see a rule allowing POP3 traffic in the
Rule Base. Which of the following is the most likely cause? The POP3:
A.service is a VPN-1 Control Connection
B.rule is hidden
C.service is accepted in Global Properties
D.service cannot be controlled by NGX
E.rule is disabled
Answer:B
CheckPoint 156-915.1 156-915.1
NO.17 Your organization has many VPN-1 Edge gateways at various branch offices, to allow VPN-1
SecureClient users to access company resources. For security reasons, your organization's Security
Policy requires all Internet traffic initiated behind the VPN-1 Edge gateways first be inspected by your
headquarters' VPN-1 Pro Security Gateway. How do you configure VPN routing in this star VPN
Community?
A.To the Internet and other targets only
B.To the center and other satellites, through the center
C.To the center only
D.To the center, or through the center to other satellites, then to the Internet and other VPN targets
Answer:D
CheckPoint answers real questions 156-915.1 156-915.1
NO.18 Select the correct statement about Secure Internal Communications (SIC) Certificates? SIC
Certificates:
A.for NGX Security Gateways are created during the SmartCenter Server installation.
B.for the SmartCenter Server are created during the SmartCenter Server installation.
C.are used for securing internal network communications between the SmartView Tracker and an
OPSEC device.
D.decrease network security by securing administrative communication among the SmartCenter Servers
and the Security Gateway.
E.uniquely identify Check Point enable machines; they have the same function as Authentication
Certificates.
Answer:B
CheckPoint original questions 156-915.1 demo 156-915.1
NO.19 Jeremy manages sites in Tokyo, Calcutta and Dallas, from his office in Chicago. He is trying to create a
report for management, detailing the current software level of each Security Gateway. He also wants to
create a proposal outline, listing the most cost-effective way to upgrade his Gateways. Which two
SmartConsole applications should Jeremy use, to create his report and outline?
A.SmartLSM and SmartUpdate
B.SmartDashboard and SmartLSM
C.SmartDashboard and SmartView Tracker
D.SmartView Monitor and SmartUpdate
E.SmartView Tracker and SmartView Monitor
Answer:D
CheckPoint 156-915.1 certification training 156-915.1
NO.20 Steve tries to configure Directional VPN Rule Match in the Rule Base. But the Match column does not
have the option to see the Directional Match. Steve sees the following screen. What is the problem?
A.Steve must enable directional_match(true) in the objectes_5_0.C file on SmartCenter Server.
B.Steve must enable Advanced Routing on each Security Gateway.
C.Steve must enable VPN Directional Match on the VPN Advanced screen, in Global properties.
D.Steve must enable a dynamic-routing protocol, such as OSPF, on the Gateways.
E.Steve must enable VPN Directional Match on the gateway object??s VPN tab.
Answer:C
CheckPoint 156-915.1 exam prep 156-915.1 156-915.1 test 156-915.1 certification
IT-Tests.com provide training tools included CheckPoint certification 156-915.1 exam study materials and simulation training questions and more importantly, we will provide you practice questions and answers which are very close with real certification exam. Selecting IT-Tests.com can guarantee that you can in a short period of time to learn and to strengthen the professional knowledge of IT and pass CheckPoint certification 156-915.1 exam with high score.
没有评论:
发表评论